厌氧填埋垃圾降解阶段指标体系的建立

以厌氧填埋场中垃圾的降解过程为依托点,从渗滤液的水质特征和填埋气的组成两个方面筛选出判断指标,最后建立判断填埋垃圾降解阶段的指标体系.结果表明,ρ(BOD5)/ρ(COD)可以反映出渗滤液的可生化性,从而间接反映出填埋垃圾所处的降解阶段,是判断填埋垃圾降解阶段的重要定量指标.     

乡镇垃圾分类循环利用现状——以闽侯县上街镇为例

由于我国乡镇经济的迅速发展以及乡镇村民生活水平加速提高,乡镇的垃圾种类及数量趋向于城市.乡镇村民居住较为分散,垃圾分类、收集、循环利用相较于城市困难,因此推进乡镇垃圾分类循环利用迫在眉睫.本文从闽侯县上街镇展开调查,以乡镇垃圾分类、回收循环利用为关键词展开分析,并从上街镇垃圾分类循环利用模式存在的问题进行分析、总结和建...     

湿热处理参数对餐厨垃圾脱水和脱油性能的影响

为了改善餐厨垃圾脱水和脱油性能,提高处理效果,对餐厨垃圾湿热工艺中的温度和加热时间等主要影响因素进行了2因素5水平的完全试验,分析了湿热处理产物的比阻、脱水率和可浮油含量等指标的变化规律,构建了餐厨垃圾固相脂质浸出反应动力学模型,研究了湿热处理参数对餐厨垃圾脱水和脱油性能的影响机理.结果表明,湿热处理初期,垃圾脱水率下降,加热40min后,脱水率开始上升,且温度越高,上升越快,180℃加热100min达最高;随着温度的升高和加热时间的延长,餐厨垃圾脱油性能呈上升趋势,温度越高,上升趋势越明显;当温度达到1     

土工膜渗漏定位方法研究

对偶极子法电极形状和外形尺寸以及其他影响定位的因素进行了深入研究.结果表明:偶极子的检测电压与偶极子的外形尺寸关系不大.偶极子检测电压最大值出现在偶极子中心与漏洞的距离等于偶极子间距的1/2处,并且偶极子的间距越大,检测电压越高.偶极子下沿距离HDPE膜越近,检测电压变化越明显.在多漏洞的情况下,当偶极子的间距小于漏洞间距时,2个漏洞都能被检测出来;当2个漏洞间距小于偶极子间距时,将可能漏检1个漏洞.膜上供电电极的位置对漏洞定位有一定的影响,在测量时应尽可能将供电电极远离测量区.      

大力推进城市资源循环利用基地建设——以北京市朝阳区资源循环利用产业基地为例

资源循环利用基地的建设是破解城市固体废弃物“邻避效应”的创新道路,有助于新型城市功能区的建设,是推进资源循环利用的主要方式。以北京市朝阳区资源循环利用产业基地为例,研究其基地建设的优势基础及制约因素,通过探索基地建设模式,分析了基地建设的总体思路和重要举措,以期为其他地区资源循环利用基地建设提供经验。     

基于活性污泥的厨余垃圾厌氧发酵产酸研究

以厨余垃圾和活性污泥为原料,考察了不同接种比例对厌氧发酵产物的挥发性脂肪酸产量、pH值和COD去除率的影响.结果表明,当厨余垃圾和活性污泥接种比例为4∶1时,挥发性脂肪酸产量在第3天达到最大值为42.7 g/L,产率提高了40%,COD去除率达到了35.6%,pH值没有发生较大的差异,其变化幅度在4～6之间.     

上海郊区小型沼气发展的前景与方向

文章介绍了上海郊区沼气开发利用的发展历程和现状,分析了上海沼气发展萎缩的原因,指出上海在节能减排的大形势、寻找合理的农村生活垃圾处理出路和解决小型禽畜养殖场的环境问题等压力下,对郊区的沼气发展产生了新的需求。而以小型养殖场为中心、吸纳农村有机生活垃圾的小型沼气系统则是上海郊区未来沼气发展的方向,也是新农村环境整治的可行途径。     

水热炭化餐厨垃圾制备纳米铁/炭复合材料

以餐厨垃圾中有机组分作为碳源,通过添加铁盐水热炭化制备铁/炭纳米复合材料。考察了不同铁盐(Fe-SO4,FeCl3,Fe(NO3)3)对餐厨垃圾水热炭化物的形貌,以及氮、磷元素的迁移转化的影响;并研究了负载铁的物理、化学性质。实验结果表明,铁盐在水热炭化过程中促进了餐厨垃圾转化生成多种纳米结构。铁的价态是影响复合物形貌的主要影响因素:三价铁离子对大分子有机物的水解和炭化过程有催化作用,从而促进壳核式结构的纳米线及微米球复合物的生成;而亚铁离子则导致可溶性有机物炭化形成空心纳米球结构。负载铁的化学形态主要受阴离子的影响:硝酸铁体系中铁主要以氢氧化物形式沉积、其他阴离子体系则以磷酸盐为主要形态负载。     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

Outdoor Weathering Evaluation of Carbon-Black-Filled, Biodegradable Copolyester as Substitute for Traditionally Used, Carbon-Black-Filled, Nonbiodegradable, High-Density Polyethylene Mulch Films

Carbon-black-filled, biodegradable, copolyester mulch film (Eastar®, or EA, Tennessee Eastman, Kingsport, TN) and commercial carbon-black-filled, high-density polyethylene (HDPE) mulch film were exposed for 12 weeks to commercial vegetable crop growing conditions by being placed directly on irrigated soil in the field of the University of Tennessee Alcoa Highway State Agriculture Experiment Station (Knoxville, TN) and by being placed on a plywood exposure rack as described by the American Society of Testing and Materials (ASTM) Standard Test Method 1435: Outdoor Weathering of Plastics. Mechanical properties and weather information were collected in order to evaluate the feasibility of using the newly developed biodegradable EA mulch film to replace the nonbiodegradable HDPE mulch film. Results indicate that the EA mulch film exhibited favorable tensile strength and elongation-at-break during outdoor exposure rack testing and outdoor, in-field, placed directly on the soil, exposure testing, suggesting biodegradable EA could be a substitute for the HDPE nonbiodegradable material.