Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

X70钢在碳酸氢钠溶液中的腐蚀行为研究

通过电化学试验方法对X70钢在NaHCO3溶液中的腐蚀行为进行了研究.实验结果表明,当NaHCO3质量分数低于0.10%时,极化曲线呈现阳极活化溶解过程,高于0.10%时阳极极化出现钝化过程,并且在-0.6 V(vs.SCE)左右出现了一个新的小电流峰.通过对交流阻抗谱分析发现,高频区均是由略偏离半圆的容抗弧组成,并且实部有所收缩.HCO3-的还原反应在阴极过程中起主要作用,整个过程受极化控制.X70钢在NaHCO3溶液中的腐蚀速度随着NaHCO3质量分数的增大而增大,在试验结束后,对试样表面的腐蚀形貌进行了观察,并利用XRD分析出腐蚀产物主要为FeO(OH)和Fe3O4.     

汽车镀锌板泥浆附着研究初探

介绍了镀锌板在大气和土壤中的研究结果;简要讨论了镀锌板通常出现的腐蚀形式;分析了镀锌板在泥浆状态中的腐蚀状况.其腐蚀是大气与土壤腐蚀的一个衔接过程,影响因素很多,可控性差.针对汽车板泥浆附着的腐蚀问题,设计了一种简化的研究模型,尝试性地做了一些实验室的研究,提出了几种可行的研究方法.     

神经网络在海水腐蚀预测中的应用

根据我国材料自然环境腐蚀网站长期以来积累的海水腐蚀数据,采用BP人工神经网络算法,建立了碳钢及低合金钢的海水腐蚀预测模型.该模型以合金成分、环境因素为输入参数,以平均腐蚀速率为输出参数.以碳钢、低合金钢的17种钢种在青岛、厦门、榆林海水腐蚀试验站16年腐蚀数据建模.选定A3钢与10CrCuSiV在以上三地16年的腐蚀数据为验证样本.结果表明该网络具有良好的预测精度,能够正确反映海水环境腐蚀性因素及金属材料腐蚀暴露时间与其腐蚀速率的关系,用于碳钢及低合金钢在海洋全浸环境中的腐蚀预测.     

SO2在碳钢初期大气腐蚀中的作用

通过自建的模拟大气腐蚀系统,借助金相显微镜、扫描电镜(SEM/EDX)、X-射线衍射(XRD)和x-射线光电子能谱(XPS),研究了SO2对碳钢初期大气腐蚀行为的影响,并进一步用原子力显微镜从更微观的角度观察了在SO2环境中初期阶段腐蚀形貌变化.研究结果表明:在SO2污染大气环境中,随SO2浓度的升高碳钢腐蚀加快.在体积分数为5×10(-6)SO2的大气环境中,碳钢和耐候钢表面腐蚀主要以条状物生长,随着SO2浓度的升高,腐蚀产物的形貌发生改变,在体积分数为5×10(-5)SO2的大气环境中,条状锈和胞状锈同时生长.在锈层中S元素以FeSO4·4H2O的形式存在,腐蚀产物中还有γ-FeOOH.SO2在初期阶段加速了碳钢的腐蚀,降低了碳钢的耐蚀性.     

湖北省某钢铁厂工业区及周边铅污染调查

为了解湖北省某钢铁厂周边铅污染的现状,通过对钢铁厂工业区及其周边乡村的土壤、蔬菜、居民体内和排污渠污泥中铅元素含量的研究,其结果表明:钢铁厂周围的土壤、蔬菜、居民均受到了一定程度的铅等重金属元素的污染,其含量高于国家标准或正常范围;钢铁厂工业区周边土壤铅污染主要由于工业废气(烟尘)扩散沉降和废水灌溉引起;污染区人体尿样中铅元素含量(116～160 ng/mL)普遍超标,头发样(2.09～12.04 μg/g)基本正常,尿样比头发样更能显示铅等重金属元素在人体内的分布特征.     

塑烧管除尘器在冶金精轧线的应用

冶金精轧线烟气烟尘含油含水，采用传统的布袋除尘等方式难以治理。塑烧管具有刚性结构、高过滤效率、压降稳定、疏水疏油性、防静电等特性，适合于治理含油含水的烟气。塑烧管除尘器在冶金精轧线的应用取得了良好的效果。     

我国废钢铁资源的可持续利用政策

本文概述了我国废钢铁资源回收利用的现状以及钢铁工业对废钢铁资源的需求现状，用三种不同的模型预测了未来钢铁工业的发展对废钢铁资源的需求，提出了废钢铁资源可持续利用存在的问题和政策建议。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。