负载型燃烧催化剂La_(0.8)Ce_(0.2)CoO_3/Ce_(0.8)Zr_(0.2)O_2制备及性能研究

以复合氧化物La0.8Ce0.2CoO3为活性组分,Ce0.8Zr0.2O2固溶体为载体,采用柠檬酸络合法制备出负载型燃烧催化剂La0.8Ce0.2CoO3/Ce0.8Zr0.2O2。用XRD、BET和SEM对其进行表征,考察了焙烧温度、反应时间、反应温度及H2S存在对催化剂活性的影响。结果表明,载体表面形成了均一的钙钛矿相;该负载型催化剂对二甲苯完全氧化反应具有较高的催化活性,有良好的热稳定性、操作稳定性和强的抗H2S毒化能力。这可能是载体与负载组分之间密切的协同作用所导致。     

废FCC催化剂对水中铅离子的连续吸附及脱附

通过测定吸附等温线，考察了Ｐｂ２＋在废ＦＣＣ（流化催化裂化）催化剂上的吸附性能及规律，结果表明，Ｐｂ２＋在废ＦＣＣ催化剂上的吸附规律可用Ｌａｎｇｍｕｉｒ和Ｆｒｕｎｄｌｉｃｈ模式描述，吸附呈单分子层形式且容易进行。又通过填充床吸附试验，对Ｐｂ２＋的连续吸附及脱附情形作了考察。结果表明，在温度为１５℃、ｐＨ为５．１３、过柱速率为３．０ｍＬ／ｍｉｎ、径高比为２．２５．０条件下，吸附柱具备适宜的生产周期，连续吸附操作可行，柱效率可达７５．９％；在温度为１５℃、采用２ｍｏｌ／Ｌ稀盐酸作脱附剂，过柱速率为５．０ｍＬ／ｍｉｎ的条件下，吸附剂易于脱附再生，脱附效率可达７８．１％     

Oxidation inhibition of sulfite in dual alkali FGD system

A laboratory-scale well-mixed thermostatic reactor with continuously blasting air was used to investigate the oxidation inhibition of sulfite in dual alkali flue gas desulfurization （FGD） system. The effects of operating parameters such as pH value and catalyst concentration on the oxidation were studied. Sodium thiosulfate was used in the system, and was found that it significantly inhabited the sulfite oxidation. In the absence of catalyst, sodium thiosulfate at 12.67 mmol/L had an inhibition efficiency of approximately 98%. While in the presence of catalyst, sodium thiosulfate at 26.72 mmol/L had an inhibition efficiency less than 85.0%. The oxidation reaction order of sulfite in the sodium thiosulfate was determined to be -1.90 and 4）.55 in the absence and presence of the catalyst, respectively. Apparent activation energy of oxidation inhibition was calculated to be 53.9 kJ/mol. Pilot tests showed that the consumption rate of thiosulfate agreed well with the laboratory-scale experimental results.     

净化含氮有机污染物的催化剂及工艺

介绍了两种催化剂PCN-1,PCN-2型对含氮有机物如N,N-二甲基甲酰胺(DMF)、正丁胺、环己胺、苯胺、硝基苯等深度氧化的活性及控NO_x能力。实验结果表明,由PCN-1、PCN构成的双催化剂处理DMF或DMF与甲苯、DMF与甲乙酮的混合蒸气,其氧化活性和控NO_x能力比单一催化剂为好。在240—300℃温度范围即可完全氧化,控NO_x率达98％以上,净化气无色无臭。本工艺可用于PU合成革生产线烘道排气的净化处理。     

Application of red mud as a basic catalyst for biodiesel production

Red mud was investigated in triglyceride transesterification with a view to determine its viability as a basic catalyst for use in biodiesel synthesis.The effect of calcination temperature on the structure and activity of red mud catalysts was investigated.It was found that highly active catalyst was obtained by simply drying red mud at 200°C.Utilization of red mud as a catalyst for biodiesel production not only provides a cost-effective and environmentally friendly way of recycling this solid red mud waste,significantly reducing its environmental effects,but also reduces the price of biodiesel to make biodiesel competitive with petroleum diesel.     

电场与MnxCey催化剂在苯氧化反应中的协同效应及机理探究

挥发性有机物（VOCs）大量排放已成为日益严重的环境问题,为了实现VOCs的高效去除,本文采用自蔓延燃烧合成法制备了一系列锰铈复合氧化物催化剂,将稳恒直流电场引入典型VOCs气体苯的催化氧化过程,并基于不同电场条件下催化剂的理化性质表征结果进行机理分析.实验结果表明,Mn_xCe_y催化剂对含苯废气的去除有良好的效果,稳恒直流电场显著促进了催化剂的活性,其中Mn₁Ce₃的催化性能最佳,电流为5 mA时,Mn₁Ce₃催化剂在155℃可达到50%的苯转化率,在202.4℃可达到90%的苯转化率,对应的转化温度T₅₀和T₉₀比传统方法分别降低了62.4℃和48.3℃,且电场中的反应活化能由52.32 kJ·mol^-1降低至32.31 kJ·mol^-1.根据实验现象及表征结果,发现协同效应与活性位点的快速持续再生及活性氧物种的转化有关,由此提出苯在Mn_xCe_y催化剂上的氧化机理及电场协同催化的反应模型.     

新型汽车尾气净化催化剂的研究

研究Ｌａ－Ｃｏ－Ｃｕ－Ｍｎ－Ｃｅ－Ｐｄ催化剂的活性和热稳定性,结果表明,该催化剂具有低温活性良好、活性高以及热稳定性好的性能特点,对ＣＯ、ＨＣ氧化的Ｔ５０％和Ｔ１００％分别约为１８２℃,２３８℃和２４０℃、２６５℃,催化剂表面组分发生强相互作用形成３种活性中心,是催化剂低的起燃温度,高活性的原因。催化剂高温处理后未发生烧结,活性未下降,热稳定性良好。     

V2O5/TiO2催化剂中毒机理的试验研究

选择性催化还原(SCR)催化剂是SCR烟气脱硝技术的核心,是整个SCR系统脱硝效率和经济性的决定因素.本文工作的主要研究思路是以钒钛SCR催化剂为研究对象,研究了H2O和SO2,以及相同含量下K、Na、Ca、Pb的氧化物对钒钛催化剂NO转化率的影响.H2O的存在会抑制V2O5/TiO2催化剂脱硝活性,而SO2在一定程度上促进(V2O5/TiO2)催化剂的SCR脱硝反应,提高NO转化率;碱金属K对钒钛催化剂的钝化作用都是最强,K2O和Na2O的掺入会抑制钒钛催化剂上V2O5的还原能力,而CaO和PbO的掺入对钒钛催化剂上V2O5的还原能力影响较小.     

光助Fenton反应催化剂Fe/Al2O3的制备及其对六氯苯的催化活性研究

采用超声促进浸渍法制备了光助Fenton催化剂Fe/Al2O3,利用该催化剂对六氯苯（HCB）进行光助Fenton氧化降解,考察了浸渍液浓度、浸渍温度、灼烧温度和灼烧时间等制备条件对其催化降解六氯苯的活性的影响,确定了制备Fe/Al2O3的工艺条件,并对制得的催化剂进行表征。结果表明,超声促进浸渍法制备非均相光助Fenton反应催化剂Fe/Al2O3的最佳工艺条件为：浸渍液浓度25mmol/L,浸渍温度40℃,焙烧温度500℃,焙烧时间3h。在此条件下制备的催化剂对六氯苯的降解具有较高的催化活性。     

Effects of WOx modification on the activity, adsorption and redox properties of CeO2 catalyst for NOx reduction with ammonia

A series of WO₃/CeO₂ (WOx/CeO₂) catalysts were synthesized by wet impregnation of ammonium metatungstate on a CeO₂ support. The resulting solid acid catalysts were characterized by X-ray diffraction (XRD), UV-Vis spectroscopy (UV-Vis), Raman spectroscopy (Raman), in-situ Fourier transform infrared spectroscopy (in-situ FT-IR) of ammonia adsorption, NH₃-TPD, H₂ temperature-programmed reduction (H₂-TPR), NH₃/NO oxidation and activity measurements for NOx reduction by NH₃ (NH₃-SCR). The results show that polytungstate (WOx) species are the main species of tungsten oxide on the surface of ceria. The addition of tungsten oxide enhances the Brönsted acidity of ceria catalysts remarkably and decreases the amount of surface oxygen on ceria, with strong interaction between CeO₂ and WOx. As a result, the N₂ selectivity of NH₃ oxidation and NH₃-SCR at high temperatures (> 300℃) is enhanced. Therefore, a wide working temperature window in which NOx conversion exceeds 80% (NOx conversion > 80%) from 200 to 450℃, is achieved over 10 wt.% WOx/CeO₂ catalyst. A tentative model of the NH₃-SCR reaction route on WOx/CeO₂ catalysts is presented.