制备方法条件对Au/CeO2催化CO低温氧化性能研究

用共沉淀法和沉积沉淀法制备了负载型Au/CeO2催化剂,考察了不同制备方法和条件对Au/CeO2催化剂活性的影响。结果表明,制备方法和条件对Au/CeO2催化剂的活性有较大的影响,其中以Na2CO3为沉淀剂的共沉淀法制备的Au/CeO2催化剂活性最佳。最佳制备条件:343K洗涤、473K焙烧、空气预处理。金和部分氧化态的金是活性中心,而且氧化态的金催化活性更好。活性位在金与氧化物载体界面,金粒径越小,金与氧化物载体的接触面越大,活性位越多,催化活性越大。     

微波协同霍加拉特剂催化氧化苯的影响因素

为了探索一种高效、快速处理典型挥发性有机物的方法,对微波协同作用下霍加拉特剂催化氧化苯的性能进行了研究,主要考查了微波作用模式、微波功率、苯初始浓度、气体流量、催化剂用量和气体湿度对处理苯效果的影响,并对影响规律进行总结。实验结果表明,微波功率70 W,苯初始浓度1 917 mg/m3,气体流量1.0 L/min,催化剂床层高度3.86 cm时,苯转化率可达99.2%。微波辐照条件下霍加拉特剂能够有效实现苯的催化氧化,并且比传统加热具有更高的能量利用率。     

V2O5-TiO2-AlF3/Al2O3催化臭氧化2,4-滴丙酸的氧化效能

为了提高有机物的臭氧化降解效率,工作中利用浸渍法制备了一种新型的三组分催化剂(记为V2O5-TiO2-AlF3/Al2O3)。催化臭氧化降解2,4-滴丙酸的实验结果表明,该催化剂能有效提高臭氧化的效率,体系可能遵循羟基自由基的作用机理。利用相对法计算结果表明,与单独臭氧化相比,V2O5-TiO2-AlF3/Al2O3催化臭氧化体系具有更大的Rct值。重复实验结果表明,该催化剂具有相对较好的稳定性。以上研究结果对推广催化臭氧化技术在实际废水处理中的应用具有重要的实际意义。     

ZnO-MgO/Al2O3吸附-臭氧催化氧化处理难降解有机废水

以活性氧化铝为载体,采用浸渍法制备催化剂,对甲基橙及草酸模拟废水进行处理.在中性条件下,臭氧催化氧化比单独臭氧氧化能提前30 min使得甲基橙溶液褪色,反应105 min时,臭氧催化氧化对TOC的去除率高达96.53%,比单独使用臭氧氧化对甲基橙TOC去除率提高了47.19%,在处理草酸废水时臭氧催化氧化对TOC去除率高达80.59%,比单独使用臭氧氧化对草酸TOC去除率提高了59.14%.在处理甲基橙及草酸的小试实验中催化剂对有机污染物的吸附作用起到了加快反应进行的作用.在对垃圾渗滤液超滤出水时,O₃与COD质量比为1:1时,臭氧催化氧化对COD去除率为49.09%,比单独使用臭氧氧化提高36.37%,臭氧催化氧化对TOC的去除率是单独使用臭氧氧化的2.54倍,在处理垃圾渗滤液纳滤浓水时,臭氧催化氧化对COD去除率高达88.72%,比单独使用臭氧氧化提高37.60%,并且臭氧催化氧化对TOC的去除率是单独臭氧氧化的1.6倍.臭氧催化氧化反应过程中产生的羟基自由基对有机物更快的反应速率.     

Insight into the promotion mechanism of activated carbon on the monolithic honeycomb red mud catalyst for selective catalytic reduction of NOx

• Activated carbon was proposed to be an efficient accelerant for molded red mud catalyst. • The surface acidity and reducibility were highly improved, as well as the pore structure. • The enrichment of the surface Fe²⁺ and the adsorbed oxygen account for the improvement. Our previous study proved that the acid-pretreatment process could efficiently activate red mud (RM) for the selective catalytic reduction (SCR) of NO_x. However, in terms of the molding process, which is the key step determining whether it can be applied in large-scale industrial, the surface acidity and reducibility of catalyst always decreased dramatically, and part of surface area and pore structure were lost. In this study, we prepared monolithic honeycomb red mud (MHRM) catalysts with activated carbon (AC) as an accelerant and investigated the effect of AC on the MHRM. The results showed that the MHRM with 3 wt.% of AC (MHRM-AC3) exhibited the best SCR performance, and kept more than 80% NO_x conversion in the range of 325°C–400°C. Compared with the MHRM, MHRM-AC1, and HMRM-AC5, the MHRM-AC3 has more mesoporous and macroporous structures, which can provide more adsorption active sites. The AC significantly improved NH₃ adsorption and surface reducibility, which was mainly due to the increase of the surface acid sites (especially the Brönsted acid sites), the concentration of Fe(II), and the surface adsorbed oxygen. The presence of more Fe(II) enriched the surface oxygen vacancies, as well as the surface adsorbed oxygen, due to the charge imbalance and unsaturated chemical bond. And surface adsorbed oxygen exhibited more active than lattice oxygen owing to its higher mobility, which was conducive to NO_x reduction in the SCR reaction.     

Application of heterogeneous catalysis to biodiesel synthesis using microalgae oil

• Microalgae oil application for biodiesel synthesis is discussed. • Catalytic effectiveness of ferment preparations and chemical catalyst is disputed. • Application of heterogeneous catalysts for biodiesel synthesis is reviewed. • Possibilities of catalyst regeneration is shown. Recently, there is a growing interest in the use of microalga in various fields. Microalgae have properties such as rapid reproduction and high biomass accumulation, and under certain conditions, some are able to accumulate a large amount of oil. However, microalgae oil often contains more free fatty acids than the vegetable oil and is therefore unsuitable for biodiesel synthesis using alkaline catalysts. For this reason, some authors suggest the application of heterogeneous catalysis. A particular interest in the use of immobilized enzymes has developed. Other solid substances can also be used as heterogeneous catalysts are usually metal oxides, carbonates or zeolites. The use of these catalysts results in simpler biodiesel synthesis, especially purification processes, a cleaner end product and a less polluted environment. The molar ratio of alcohol to oil is lower during enzymatic transesterification, and more than 90% ester yield is obtained using a molar ratio of alcohol to oil of 3:1 to 4.5:1. The alcohols do not have a negative effect on the effectiveness of chemical catalysts, so it is possible to use alcohols in molar ratio from 4:1 to 12:1. The optimal temperature of enzymatic process is 30℃‒50℃. An ester yield of more than 95% was obtained in 12‒48 h. Using chemical catalysts, greater than a 95% yield of esters was obtained at higher temperatures in a shorter time. Material costs of enzymatic catalysis can be reduced by reusing the catalysts directly or after regeneration.     

废聚酯非酸催化合成对苯二甲酸二(2-乙基己)酯的研究

介绍了以废聚酯瓶为原料,用醋酸锌与氧化镁复合催化剂合成对苯二甲酸二(2-乙基己)酯(DOTP)的方法.利用正交实验研究了醇解酯交换反应中的影响因素,并对产物进行了表征.当反应条件:n(2-EH)/n(PET)=4,m(催化剂)/m(PET)=1%,反应时间为8 h,反应最高温度为200℃时,对苯二甲酸二(2-乙基己)酯的收率为82.3%,与其他酯化催化剂相比,醋酸锌与氧化镁复合的催化活性最好.      

低温等离子体和催化剂协同作用处理有害气体

低温等离子体和催化剂协同作用技术具有分解效率高、能耗低、副产物少的优点而逐渐成为处理低浓度、大流量有害气体的重要方法。文章对反应机理、反应器的结构和在处理挥发性有机污染物(VOCs)、氮氧化合物等方面的研究进展做了概括,指出了该技术在环境治理方面的应用前景和发展方向。     

碱金属改性Pd/γ-Al2O3催化剂三效性能的研究

考察了碱金属对氧化铝负载钯催化剂的改性作用,发现钾的作用最为明显,其三效起燃温度可降低50℃以上,在氧化还原数S=1．0和S=1．5两种条件下进行对比,表明碱金属的掺入可以拓宽催化剂的操作窗口,低电负性碱金属的掺入,一方面增强了电负性物种CO,NO和O2的吸附能力,同时减弱了电正性物种C3H6的吸附能力,另一方面,削弱了吸附态分子NO中N-O键的键能,促进其解离,抑制了N2O的生成。