Effect of six kinds of scale inhibitors on calcium carbonate precipitation in high salinity wastewater at high temperatures

Precipitation of calcium carbonate(Ca CO3) scale on heat transfer surfaces is a serious and expensive problem widely occurring in numerous industrial processes. In this study, we compared the scale inhibition effect of six kinds of commercial scale inhibitors and screened out the best one(scale inhibitor SQ-1211) to investigate its scale inhibition performance in highly saline conditions at high temperature through static scale inhibition tests. The influences of scale inhibitor dosage, temperature, heating time and p H on the inhibition efficiency of the optimal scale inhibitor were investigated. The morphologies and crystal structures of the precipitates were characterized by Scanning Electron Microscopy and X-ray Diffraction analysis. Results showed that the scale inhibition efficiency of the optimal scale inhibitor decreased with the increase of the reaction temperature. When the concentration of Ca2+was 1600 mg/L, the scale inhibition rate could reach 90.7% at 80°C at p H 8. The optimal scale inhibitor could effectively retard scaling at high temperature. In the presence of the optimal scale inhibitor, the main crystal structure of Ca CO3 changed from calcite to aragonite.     

Analysis of trace dicyandiamide in stream water using solid phase extraction and liquid chromatography UV spectrometry

An improved method for trace level quantification of dicyandiamide in stream water has been developed. This method includes sample pretreatment using solid phase extraction. The extraction procedure (including loading, washing, and eluting) used a flow rate of 1.0 mL/min, and dicyandiamide was eluted with 20 mL of a methanol/acetonitrile mixture (V/V = 2:3), followed by pre-concentration using nitrogen evaporation and analysis with high performance liquid chromatography–ultraviolet spectroscopy (HPLC–UV). Sample extraction was carried out using a Waters Sep-Pak AC-2 Cartridge (with activated carbon). Separation was achieved on a ZIC^®-Hydrophilic Interaction Liquid Chromatography (ZIC-HILIC) (50 mm × 2.1 mm, 3.5 μm) chromatography column and quantification was accomplished based on UV absorbance. A reliable linear relationship was obtained for the calibration curve using standard solutions (R² > 0.999). Recoveries for dicyandiamide ranged from 84.6% to 96.8%, and the relative standard deviations (RSDs, n = 3) were below 6.1% with a detection limit of 5.0 ng/mL for stream water samples.     

Potential application of high pressure carbon dioxide in treated wastewater and water disinfection: Recent overview and further trends

Recently emerging disadvantages in conventional disinfection have heightened the need for finding a new solution. Developments in the use of high pressure carbon dioxide for food preservation and sterilization have led to a renewed interest in its applicability in wastewater treatment and water disinfection. Pressurized CO₂ is one of the most investigated methods of antibacterial treatment and has been used extensively for decades to inhibit pathogens in dried food and liquid products. This study reviews the literature concerning the utility of CO₂ as a disinfecting agent, and the pathogen inactivation mechanism of CO₂ treatment is evaluated based on all available research. In this paper, it will be argued that the successful application and high effectiveness of CO₂ treatment in liquid foods open a potential opportunity for its use in wastewater treatment and water disinfection. The findings from models with different operating conditions (pressure, temperature, microorganism, water content, media …) suggest that most microorganisms are successfully inhibited under CO₂ treatment. It will also be shown that the bacterial deaths under CO₂ treatment can be explained by many different mechanisms. Moreover, the findings in this study can help to address the recently emerging problems in water disinfection, such as disinfection by-products (resulting from chlorination or ozone treatment).     

大渡河上游丹巴地区地质灾害的地貌分维特征解析

地貌对地质灾害的分布、类型、规模与危害等特征具有重要的影响,宏观及微观地貌指标均能在一定程度上刻画其作用特征。应用高分辨率遥感影像详细解译崩塌和滑坡灾害,采用高精度DEM和滑动窗口技术提取地貌分维特征,并用其解析灾害分布的地貌特征。结果表明:灾害体的内部与后壁、前缘、侧壁和邻区均表现出较为明显的分异性,崩塌的微地貌分异特征较之滑坡显著,大型、厚层、老(古)崩塌及滑坡分异特征更为突出。计算地貌分维值可有效识别与其同时期的或更早的地质灾害,也可间接挖掘新发生灾害的微地貌复杂性和离散性。     

植被混凝土在官地水电站的试验分析

本文主要对官地水电站高陡边坡植被混凝土前期绿化试验成果进行分析,以寻求在干湿季节明显、雨量集中、干旱季节漫长、温度高、蒸发量大等干热河谷气候特征条件下的最佳生境构筑方法,为官地水电站乃至雅砻江流域水电工程高陡边坡生态恢复提供技术依据。     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

循环热处理对高速钢超塑性的影响

此文研究了循环热处理工艺对W6Mo5Cr4V2钢超塑性的影响.结果表明:该钢在1040℃两次循环淬火是实现其超塑性的最佳热处理工艺;按此工艺进行预处理后,在810℃、初始应变速率为5.56×10~(-1)s~(-1)的条件下,该钢的超塑延伸率可达187%.     

Incidence rates and risk factors for injury events in high school students in Lijin County, China

PROBLEM: Most investigations of injuries among Chinese populations are focused on urban or better developed areas, fewer on rural or poor areas. METHODS: From September 21 to 27, 2002, an epidemiological investigation of eight kinds of injury-related events was carried out among 1,944 students in 39 classes randomly sampled from middle schools in Lijin County, a rural area. The eight kinds of events were: (a) traffic accidents, (b) poisoning, (c) fall, (d) burn or scald, (e) blunt or sharp tools contact, (f) electrical contact, (g) animal or insect bites, and (h) non-fatal drowning. RESULTS: The total incidence rate of eight kinds of injuries in the previous year was 21.1%. The incidence rate among boys was 24.2%, while that among girls was 17.4%, which was significant (chi-square=13.4, P<0.05). The incidence rate among junior high school students was 23.1%, while that among senior high school students was 15.5%, which was also significant (chi-square=13.2, P<0.05). A case-control study of 410 students with at least one of eight kinds of injury events indicated that students' gender and their mothers' health status were related to their injuries. CONCLUSION: The injury incidence rate in a rural area was less than other results in urban or developed areas. Students' gender and mothers' health status were important factors associated with the occurrence of injury. IMPACT ON INDUSTRY: In order to improve the surroundings of the growing population of adolescents, some preventive measures should be put forward, especially to the high-risk students of injury.     

Temporal trends in agricultural water use and the relationships to hydroclimatic factors in the High Plains aquifer region

The High Plains aquifer (HPA) is the primary water source for agricultural irrigation in the US Great Plains. The water levels in many locations of the aquifer have declined steadily over the past several decades because the rate of water withdrawals exceeds recharge, which has been a serious concern to the water resources management in the region. We evaluated temporal trends and variations in agricultural water use and hydroclimatic variables including precipitation, air temperature, reference evapotranspiration, runoff, groundwater level, and terrestrial water storage across the HPA region for different periods from 1985 to 2020 at the grid, county, or region scale. The results showed that water withdrawals decreased from 21.3 km³/year in 1985 to 18.2 km³/year in 2015, while irrigated croplands increased from 71,928 km² in 1985 to 78,464 km² in 2015 in the entire HPA. The hydroclimatic time-series showed wetting trends in most of the northern HPA, but drying and warming trends in the southern region from 1985 to 2020. The groundwater level time-series indicated flat trends in the north, but significant declining in the central and southern HPA. Trends in irrigation water withdrawals and irrigation area across the HPA were controlled by the advancement of irrigation systems and technologies and the management of sustainable water use, but also were affected by dynamical changes in the hydroclimatic conditions.     

Dynamic pressure induced by a methane–air explosion in a coal mine

The hazardous effect of dynamic pressure and strong gas flows induced by a methane–air mixture explosion in underground coal mines is studied. The dynamic pressure effect of a methane–air explosion was analyzed by numerical simulation, in a duct and tunnel. Compared to the overpressure generated by an explosion that can act on a body, the dynamic pressure caused by the high-speed flow of the gaseous combustion products can cause serious damage as well. At the structural opening of a coal mine, the destruction caused by the dynamic pressure induced by a methane–air explosion is more serious than the overpressure. For a tube or tunnel partially filled by a methane–air mixture, the dynamic pressure is lower than the overpressure in the region occupied by the flammable mixture. Beyond the premixed region, the dynamic pressure is of the same order of magnitude as the overpressure.