Corrosion behavior of steels for CO2 injection

The process chain for Carbon Capture and Sequestration (CCS) includes tubing for injection of CO₂ into saline aquifers. The compressed CO₂ is likely to contain specific impurities; small concentrations of SO₂ and NO₂ in combination with oxygen and humidity are most harmful. In addition, CO₂ saturated brine is supposed to rise in the well when the injection process is interrupted. The material selection has to ensure that neither CO₂ nor brine or a combination of both will leak out of the inner tubing. In this comprehensive paper the investigated materials range from low-alloy steels and 13% Cr steels up to high-alloy materials. Electrochemical tests as well as long term exposure tests were performed in CO₂, in brine and combination of both; pressure was up to 100 bar, temperature up to 60 °C. Whereas the CO₂ stream itself can be handled using low alloy steels, combinations of CO₂ and brine require more resistant materials to control the strong tendency to pitting corrosion. The corrosion behavior of heat-treated steels depends on factors such as microstructure and carbon content. For different sections of the injection tube, appropriate materials should be used to guarantee safety and consider cost effectiveness.     

Rapid liquid chromatographic analysis of Metoclopramide in pharmaceutical preparations

A sensitive, accurate and reproducible method for the analysis of metoclopramide, a gastrointestinal drug, has been described. An isocratic HPLC elution method was employed which requires about 10 minutes to be performed. The concentration of metoclopramide hydrochloride preparations was found to be 95.1 ±0.3% and 94.21 ±0.25% in tablet and injection formulations, respectively.     

扬沸火灾发生时间预测模型的建立与应用分析

原油储罐扬沸火灾由池火灾发展而成,是一种危害性极大的事故.准确预测扬沸事故发生的时间,是扬沸机理研究中的难题之一.现有扬沸时间计算的通用模型由于没有考虑油品的粘性作用,计算结果误差较大.把扬沸火灾简化为无内热源的非稳态传热问题,在此基础上进行传热分析,进而推导出扬沸事故时间计算模型.设定了6组不同尺寸和不同充装水平的原油储罐池火灾,利用推导模型计算出了相应的扬沸事故发生时间.将计算结果与通用模型计算结果以及实验结果进行对比:该模型的准确性由于通用模型,计算结果与实验值误差较小,较为合理.研究结果对于扬沸火灾事故下消防人员的灭火救援的安全保障具有重要意义.     

Sustainable options of post treatment of UASB effluent treating sewage: A review

The upflow anaerobic sludge blanket (UASB) process is reported to be a sustainable technology for domestic wastewaters treatment in developing countries and for small communities. However, the inability of UASB process to meet the desired disposal standards has given enough impetus for subsequent post treatment. In order to upgrade the UASB based sewage treatment plants (STPs) to achieve desired effluent quality for disposal or for reuse, various technological options are available and broadly differentiated as primary post-treatment for the removal of organic and inorganic compounds and suspended matter; secondary post-treatment for the removal of hardly degradable soluble matter, colloidal and nutrients; and polishing systems for removals of pathogens. Hence, this paper discusses the different systems for the treatment of UASB reactor effluent treating sewage. Additionally, a comparative review, an economic evaluation of some of the emerging options was conducted and based on the extensive review of different integrated combination, i.e. UASB-different aerobic systems, a treatment concept based on natural biological mineralization route recognized as an advanced technology to meet all practical aspects to make it a sustainable for environmental protection, resource preservation and recovering maximum resources.     

Efficient degradation of Rhodamine B by magnetically recoverable Fe3O4-modified ternary CoFeCu-layered double hydroxides via activating peroxymonosulfate

Environment-friendly nano-catalysts capable of activating peroxymonosulfate (PMS) have received increasing attention recently. Nevertheless, traditional nano-catalysts are generally well dispersed and difficult to be separated from reaction system, so it is particularly important to develop nano-catalysts with both good catalytic activity and excellent recycling efficiency. In this work, magnetically recoverable Fe₃O₄-modified ternary CoFeCu-layered double hydroxides (Fe₃O₄/CoFeCu-LDHs) was prepared by a simple co-precipitation method and initially applied to activate PMS for the degradation of Rhodamine B (RhB). X-ray diffraction (XRD), fourier transform infrared spectrometer (FT-IR), scanning electron microscope (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller method (BET), and vibrating sample magnetometer (VSM) were applied to characterize morphology, structure, specific surface area and magnetism. In addition, the effects of several key parameters were evaluated. The Fe₃O₄/CoFeCu-LDHs exhibited high catalytic activity, and RhB degradation efficiency could reach 100% within 20 min by adding 0.2 g/L of catalyst and 1 mmol/L of PMS into 50 mg/L of RhB solution under a wide pH condition (3.0-7.0). Notably, the Fe₃O₄/CoFeCu-LDHs showed good super-paramagnetism and excellent stability, which could be effectively and quickly recovered under magnetic condition, and the degradation efficiency after ten cycles could still maintain 98.95%. Both radicals quenching tests and electron spin resonance (ESR) identified both HO? and SO₄^?? were involved and SO₄^?? played a dominant role on the RhB degradation. Finally, the chemical states of the sample's surface elements were measured by X-ray photoelectron spectroscopy (XPS), and the possible activation mechanism in Fe₃O₄/CoFeCu-LDHs/PMS system was proposed according to comprehensive analysis.     

Analysis of energy recovery potential using innovative technologies of waste gasification

In this paper, two alternative thermo-chemical processes for waste treatment were analysed: high temperature gasification and gasification associated to plasma process. The two processes were analysed from the thermodynamic point of view, trying to reconstruct two simplified models, using appropriate simulation tools and some support data from existing/planned plants, able to predict the energy recovery performances by process application. In order to carry out a comparative analysis, the same waste stream input was considered as input to the two models and the generated results were compared. The performances were compared with those that can be obtained from conventional combustion with energy recovery process by means of steam turbine cycle. Results are reported in terms of energy recovery performance indicators as overall energy efficiency, specific energy production per unit of mass of entering waste, primary energy source savings, specific carbon dioxide production.     

高速铁路高填复合路堤边坡安全问题探讨

路基是高速铁路安全系统的关键和薄弱环节 ,建在软土上的高填路堤边坡是否稳定 ,更是直接关系到路基乃至整个高速铁路系统的安全 ,采用桩—网复合地基形式修建高路堤是一个好办法 ,这种路堤形式尚不多见。笔者结合其特点 ,从理论上提出了一种新的边坡安全实用计算方法 ;讨论了影响边坡安全的主要因素 ;验证了这一计算方法的合理性     

生物技术处理稠油废水的研究

试验分别利用三种生物处理方法：好氧、厌氧及酵母菌处理方法对稠油废水进行了处理。COD去除率在30%以下。在处理过程中,好氧污泥生物量表现出明显的增长。厌氧污泥及酵母菌在处理前后生物量几乎无变化。处理效果不明显与稠油废水可生化性差的性质有关,也与试验条件及选择菌种有关。     

沉淀--吸附处理双氯灭痛高浓度有机废水的工艺研究

介绍了用沉淀－吸附法处理双氯灭痛高浓度有机废水的工艺。先用废盐酸将废水的ｐＨ调节到４,沉淀、过滤,然后将滤液依次经过炉渣、生炭串级吸附,处理后的废水ＣＯＤＣｒ、ｐＨ、ＳＳ均达到ＧＢ８９７８－８８污水综合排放制药行业二级标准。     

利用复合酵母菌系统处理含油污泥

利用筛选得到的10株酵母菌组成复合酵母菌系统,并将该复合菌系统接种到泥浆反应器中对模拟油泥样品进行了处理。在对反应器进行优化的基础上,比较了复合酵母菌体系和经驯化的活性污泥体系对模拟风化油泥的处理效果,发现复合酵母菌在反应速度和油去除率上都优于活性污泥。利用GCMS对复合酵母菌处理体系中主要脂肪烃组分的变化进行了分析,结果表明原油组分中脂肪烃部分在处理8d后基本被完全降解。