首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   159篇
  免费   23篇
  国内免费   67篇
安全科学   13篇
废物处理   32篇
环保管理   10篇
综合类   111篇
基础理论   46篇
污染及防治   29篇
评价与监测   7篇
灾害及防治   1篇
  2023年   1篇
  2022年   3篇
  2021年   3篇
  2020年   7篇
  2019年   4篇
  2018年   4篇
  2017年   8篇
  2016年   8篇
  2015年   11篇
  2014年   13篇
  2013年   35篇
  2012年   17篇
  2011年   15篇
  2010年   5篇
  2009年   10篇
  2008年   8篇
  2007年   14篇
  2006年   12篇
  2005年   12篇
  2004年   11篇
  2003年   2篇
  2002年   7篇
  2001年   5篇
  2000年   3篇
  1999年   4篇
  1998年   3篇
  1997年   5篇
  1996年   7篇
  1994年   3篇
  1993年   4篇
  1991年   2篇
  1987年   1篇
  1979年   1篇
  1977年   1篇
排序方式: 共有249条查询结果,搜索用时 656 毫秒
211.
硫杆菌浸出废旧MH/Ni电池中重金属研究   总被引:1,自引:0,他引:1  
孙艳  吴锋  辛宝平  李丽 《生态环境》2007,16(6):1674-1678
生物淋滤法具有对环境友好、反应温和、运行成本低等优点,近年来主要用于回收难浸提矿石中有用金属及城市污泥有毒重金属脱除。应用氧化硫硫杆菌和氧化亚铁硫杆菌对废旧MH/Ni电池电极材料中重金属进行了生物淋滤处理可行性及工艺技术研究,考查了初始pH值、电极材料投加量、温度及底物单质硫添加量对金属Ni、Co浸出率的影响。试验结果表明:硫杆菌可以浸出电极材料中的重金属Ni和Co,初始pH值及温度对生物淋滤过程金属Ni、Co浸出率影响显著。在初始pH值1.0、电极材料质量分数为1.0%、温度30℃、底物单质硫质量浓度为4.0g·L-1条件下,经过20d生物淋滤,废旧MH/Ni电池中金属Ni和Co浸出率分别为95.7%和72.4%。  相似文献   
212.
本研究对地表水中镍的石墨炉原子吸收分光光度法进行了优化。通过对该方法的试样酸度、不同基体改进剂添加效果、狭缝宽度及主要升温程序等因素的探讨和摸索,确定了最佳的实验条件。在以0.2%硝酸为定容介质、狭缝宽度为0.2 nm、灰化温度1200℃保持5 s、原子化温度2300℃保持5 s的条件下测定方法检出限、精密度及加标回收率。结果表明,方法检出限为0.95μg/L,精密度为1.87%~3.01%,加标回收率介于87.4%~102.9%,优化后的方法检出限低,精密度与准确度良好,适于清洁地表水中镍的测定。  相似文献   
213.
Changes in DNA methylation in Zea mays plantlets in response to cobalt and nickel (5, 10, 20, and 40 mmol L?1) evaluated by the coupled restriction enzyme digestion-random amplification technique revealed dose-related increases in hypermethylation. The effects on mitotic index and phytohormone levels were also determined. Co and Ni caused a decrease in mitotic index and an attenuation in the growth-promoting hormones gibberellic acid, zeatin, and indole acetic acid, while abscisic acid levels rose. These findings have shown that the increase in abscisic acid levels and DNA methylation depend on the concentrations of Co and Ni.  相似文献   
214.
The present work covers the preparation of carbon-based nanosorbents by ethylene decomposition on stainless steel mesh without the use of external catalyst for the treatment of water containing nickel ions (Ni2+). The reaction temperature was varied from 650 to 850℃, while reaction time and ethylene to nitrogen flow ratio were maintained at 30 min and 1:1 cm3/min, respectively. Results show that nanosorbents synthesised at a reaction temperature of 650℃ had the smallest average diameter (75 nm), largest BET surface area (68.95 m2/g) and least amount of impurity (0.98 wt.% Fe). A series of batch sorption tests were performed to evaluate the effects of initial pH, initial metal concentration and contact time on Ni2+ removal by the nanosorbents. The equilibrium data fitted well to Freundlich isotherm. The kinetic data were best correlated to a pseudo second-order model indicating that the process was of chemisorption type. Further analysis by the Boyd kinetic model revealed that boundary layer diffusion was the controlling step. This primary study suggests that the prepared material with Freundlich constants compared well with those in the literature, is a promising sorbent for the sequestration of Ni2+ in aqueous solutions.  相似文献   
215.
Abstract The biorefinery concept has been proposed as a route map to convert biomass into fuels and chemicals, maximizing economic and environmental benefits while minimizing pollution. A biorefinery strategy based on fast pyrolysis is proposed following a two-stage process, where biomass is first subjected to fast pyrolysis, optimized to collect up to 75% (per unit weight of biomass) of a liquid fraction called bio-oil. This bio-oil or its fractions can be upgraded in a second step to different chemicals, to a syngas and/or to energy. In particular, the catalytic steam reforming of the aqueous fraction of bio-oil obtained by fractionation with water is one of the most attractive possibilities for bio-oil upgrading, yielding a H2-rich syngas with low CO content. From the results obtained, it can be concluded that the best alternative for the catalytic steam reforming process is hydrogen production through further purification of the gas obtained.  相似文献   
216.
文中基于镍对骨螺紫的荧光具有猝灭的作用,并且加入曲拉通X-100后,猝灭程度明显加大的特性,拟定了一种测定痕量镍的方法。该方法的激发波长为365 nm,发射波长为443 nm,检测的线性范围为1~300μg/L,线性相关系数0.983 4,相对标准偏差为2.09%,检出限为0.084 4μg/L,样品的加标回收率为98.5%~103.6%,该方法可用于人发中镍的检测。  相似文献   
217.
电镀废水中镍的回收和利用   总被引:2,自引:0,他引:2  
采用化学沉淀法回收电镀含镍废水中的Ni~(2+),研究了各工艺因素对回收效果的影响.实验结果表明,回收电镀含镍废水中Ni~(2+)的最佳工艺条件为:反应温度30 ℃,废水pH 12~13,0.1 mol/L的NaOH溶液加入量70 mL,以聚丙烯酸钠为絮凝剂,搅拌转速1 250 r/min,搅拌时间2 min.将回收产物Ni(OH)_2用作润滑油添加剂可有效改善润滑油的摩擦磨损性能.  相似文献   
218.
钯负载泡沫镍电极电化学还原水中三氯乙酸   总被引:1,自引:0,他引:1       下载免费PDF全文
采用非电沉积法制备了钯负载泡沫镍电极,运用SEM技术对其进行了表征,并以其阴极、铂丝为阳极进行了电化学还原三氯乙酸的研究,考察了工艺条件对三氯乙酸降解效果的影响,并对反应动力学和反应机理和进行了探讨。结果表明:钯负载泡沫镍电极具有较高的比表面积和良好的储氢性能;以20 mmol/L硫酸钠为电解质,在电解温度为20℃、钯负载量为4.5 mg/cm~2的条件下恒流(10 mA)电解240 min,三氯乙酸降解率达99.76%,氯原子脱除率达73.86%;三氯乙酸的电化学还原反应过程以及三氯乙酸上未脱除氯原子浓度的变化均符合拟一级反应动力学方程;三氯乙酸在电化学还原过程中逐个脱除氯原子。  相似文献   
219.
采用管式炉对污水厂活性污泥焚烧过程中Ni的迁移分布特性进行研究。实验结果表明:当污泥掺烧量(污泥质量与煤和污泥总质量的比)为25%时,Ni的挥发率(飞灰与气体中Ni质量的总和与污泥中Ni质量的比)几乎为零,且污泥与煤混合试样的综合燃烧效果最好;当污泥焚烧加入硫化物时,各种硫化物对Ni的残留率(炉渣中Ni的质量与污泥中Ni质量的比)提高能力大小顺序为Na2S>S>Na2SO3>Na2SO4;当污泥焚烧加入氯化物时,促使Ni向烟气中迁移,且加入无机氯更易使Ni向烟气中迁移。  相似文献   
220.
光电催化氧化法脱色处理刚果红染料废水   总被引:2,自引:0,他引:2       下载免费PDF全文
方涛  徐霞  邓丽娟  曲美洁  吴君  李鑫 《化工环保》2014,34(6):515-519
采用阴极还原法制备了泡沫镍负载纳米ZnO(ZnO/Ni)电极,采用SEM和XRD技术对ZnO/Ni电极进行了表征。以高压汞灯为光源,ZnO/Ni电极为阳极,铂电极为阴极,对模拟刚果红染料废水进行了光电催化脱色处理。考察了催化工艺、电解质种类及浓度、初始废水pH和反应温度等因素对刚果红降解率的影响。表征结果显示, 制备的纳米ZnO呈六方晶系结构,平均粒径为23.6 nm。实验结果表明,当外加电流为1.0 mA时,在初始刚果红质量浓度为30 mg/L、电解质Na2SO4浓度为0.050 mol/L、初始废水pH为5、反应温度为50 ℃的条件下,光电催化反应60 min后,刚果红降解率为86.36%,COD和色度的去除率分别达到70.56%和92.86%。  相似文献   
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号