Activated fly ash/slag blended cement

This paper presents the results of the preparation of an ecological cementing material from granulated blast-furnace slag (GBFS) and Class C fly ash (CCFA). The desulphurization gypsum, calcined at 600–800 °C for 0.5–1.5 h, works as the main ingredient of the activator in the cementing material. The optimized formulation of the cementing material was obtained with the aid of factorial design method: slag, 70%; CCFA, 18%; activator, 12%. The “partial super-fine grinding process” was adopted to improve the performance, i.e., 85% of the mixture is ground to Blaine fineness of 3500 cm²/g, 15% further ground to around 5000 cm²/g. The compressive strength of 28 days of the cement mortar is up to 49 MPa and flexural strength 8.4 MPa. The hydration products, investigated by SEM and X-ray diffraction, are mainly ettringite and C–S–H gel.     

纤维质燃料正向阴燃传播的数值分析

根据多孔固体燃料3步反应动力学机理,建立了2D非稳态纤维质材料水平填充床正向阴燃的数学模型。阴燃的化学动力过程包括燃料吸热热解、燃料放热氧化及焦炭的放热氧化3个过程。该模型既考虑了固-气之间的热交换,也考虑到了气体在多孔介质内的扩散系数的变化。辐射换热采用扩散近似的方式在模型中予以考虑。应用该模型,数值模拟了来流速度对阴燃速度及平均最高温度的影响,结果表明:阴燃传播速度与来流速度基本上呈线性关系,来流速度对阴燃最高温度影响不大。同时也模拟了燃料阴燃温度分布、燃烧过程中气体组分(O2,CO,CO2,H2O)及固体成分(燃料、焦炭和灰分)的变化过程。数值计算阴燃速度与实验速度基本吻合。     

危险化学品泄漏扩散研究探讨

对危险化学品泄漏扩散的研究是事故应急救援的基础。针对近年来日益增多的危险化学品泄漏事故,本文从数学模型和计算机仿真模拟两方面系统评述了国内外危险化学品泄漏扩散方面的研究,其中数学模型研究主要分为“反求源强”模型和扩散模型两类,计算机仿真模拟主要分为静态离线仿真模拟和实时动态仿真模拟两类。在此基础上,提出了进一步研究的一般框架和研究的方向。     

How Is Household Vulnerability Gendered? Female‐headed Households in the Collectives of Suleimaniyah,Iraqi Kurdistan

This research tries to reach an understanding of the well-being of female-headed household members through a comparison to male-headed household members in the collectives of the Suleimaniyah governorate in Iraqi Kurdistan. Research was undertaken in five collectives in Suleimaniyah during the summer of 1998. The research contributes to the current gender and development debates which are concerned with improving the understanding of the specific gendered forms of disadvantage faced by female-headed households rather than assuming the universal poverty of this group. An understanding of well-being is approached through a broad conceptualisation of vulnerability in preference to a narrow poverty definition. That the findings of this research are complex attests to the multi-dimensional and mutually constitutive gendered experiences of vulnerability. The definitive conclusion to emerge from this research is a refuting of the rhetoric-fuelled stereotype that households headed by women are at a disadvantage in all the dimensions of vulnerability in comparison to households headed by men. The research also establishes the methodological necessity of examining intra-household distributive mechanisms that determine individuals' well-being.     

皖东地区中药材资源的调查、评价与区划

在调查研究的基础上 ,首先分析了皖东地区中药材资源的优势 ,建立了包括利用价值系数、利用现状系数、濒危系数、栽培系数、分布系数、蕴藏系数 6个评价指标的“中药材优先开发”指标体系 ,据此将皖东地区国家和省规定普查的 2 37种中药材确定为一级优先开发的有 6种、二级优先开发的有 79种、三级优先开发的有 96种、暂缓开发的有 5 6种。最后 ,以中药材资源的开发利用与保护为目的 ,将皖东地区划分为低山丘陵药材保护区、浅丘岗地药材开发区、沿湖河药材利用区以及沿淮洼地药材扩大区     

纳米气敏材料的研究与发展趋势

各种气体尤其是对可燃性气体和毒性气体的检测和监控已成为企业当前急需解决的问题之一。纳米技术对提高气敏材料的灵敏度、选择性和长期稳定性有重要的作用,并且能降低工作温度和缩短温度的响应时间。文中论述了氢气、硫化氢、碳氢化合物、氮氧化合物、乙醇、丙酮等气体的纳米气敏材料的研究现状,并对其发展的趋势进行了预测。     

环境保护新曙光——纳米材料在环保中的应用

本文介绍了纳米TiO2光催化性的作用机理以及在环境保护中的应用，并对其应用前景及存在的问题作了简要地阐述。此外还介绍了纳米氧化锌及纳米稀土钙钛矿复合氧化物等纳米材料在环境保护中的应用。     

利用粉煤灰制作新型建筑材料

粉煤灰不仅占用大量耕地,而且严重污染环境。针对东营地区粉煤灰的产生现状,积极开发粉煤灰的废物利用。通过对粉煤灰生产空心砌块的原料配比和生产工艺实施的调查,结果表明,利用粉煤灰生产新型建筑材料是减少占地和建材工业征地的有效途径,能变废为宝、化害为利,达到保护环境的目的。     

Investigations on an evacuated tube solar water heater using hybrid-nano based organic phase change material

ABSTRACT

This work explores the opportunities to address the setback in thermal energy storage of solar-based water heaters by uniting it with a suitable hybrid-nano composite phase change material (HNCPCM) in a static mode of operation. The experiments were conducted on a natural circulation all-glass evacuated solar water heating system (AGSWH). The investigation was steered in five cases such that the first case without any phase change material (PCM), the second with pure paraffin as PCM, and remaining three cases with three different mass percentage of HNCPCMs (0.5%, 1.0%, and 2.0% mass fraction of hybrid nanoparticles within PCM) in real-time solar exposure. The system was analyzed based on the first and second law of thermodynamics to assess the performance in all the five cases. Erstwhile, the hybrid nanoparticles were prepared by blending equal mass of SiO₂ and CeO₂ nanoparticles and characterized to gauge its thermal storage properties. The achieved results substantiated that the thermal conductivity had boosted with the accumulation of hybrid nanoparticles within the paraffin matrix, and maximum enhancement of 65.56% was attained with 2.0% mass fraction. The first law and second law investigations revealed that the incorporation of hybrid-nano composites improved the energy and exergy content of the system, distinctly. Among the experimented cases, HNCPCM with 1.0 mass% of hybrid nanoparticles remarkably yielded a better result of 19.4% and 1.28% improvement in energy and exergy efficiencies, respectively. Besides, it evidenced the necessity of choosing the right quantity of nanoparticles for achieving better overall results.     

PHYSICAL AND CONCEPTUAL SIMULATION OF EFFLUENTS FROM DREDGED MATERIAL CONFINEMENT FACILITIES1

ABSTRACT: Environmental protection dictates that effluents of desired quality should be dischargd from dredged material confinement facilities. In general, this can be accomplished by supplementing the solid-liquid separation obtained by simple sedimentation with appropriate filter systems which provide additional clarification. A methodology to estimate the sedimentation required in a disposal area was developed on the basis of classical sedimentation theories and compared favorably with field data. A procedure was then advanced and documented whereby effluents from dredged material confinement facilities can be successfully modeled for laboratory filtration tests. For these purposes inorganic suspended solids can be simulted reasonably well by adjusting the concentration of commercially available clays, and fresh or saline water environments can be simulated satisfactorily by tap water or sodium chloride solutions, respectively.