Removal capacity and pathways of phenolic endocrine disruptors in an estuarine wetland of natural reed bed

Phenolic compounds are partly known as endocrine disruptors with various harmful effects including feminization and carcinogenesis at very low concentrations. Consequently, the pathways and removal of these compounds in natural and artificial sewage treatment systems such as wetlands have received wide concern. In this paper, a natural reed bed wetland with an area of 695 ha located in the Liaohe River estuary in Northeast China was employed as a demonstration site to study the retention and removal efficiency of phenolic compounds including 4-nonylphenol (4-NP), bisphenol A (BPA), 4-t-octylphenol (4-t-OP), and 2,4-dichlorophenol (DCP), and to evaluate their purification capacity via water and mass balance analyses during an irrigation period from May 9 to September 8, 2009. The results showed that the phenolic compounds could be retained in the wetland system and removed through various processes. On average, 27.5% of phenolic compounds could be retained by the wetland substrate during the initial three-day irrigation period with a retention capacity order of 4-t-OP > 4-NP > BPA > DCP. During the following 120 d irrigation period, the phenolic compounds could be efficiently removed with an average percentage of 91.6%. It is estimated that 1.76 kg d⁻¹ of phenolic compounds could be removed by the Liaohe River estuarine wetland (∼8 × 10⁴ ha). The reed bed wetland system therefore provides a feasible mitigation option for phenolic pollutants in sewage and wastewater.     

Altitudinal distributions of BDE-209 and other polybromodiphenyl ethers in high mountain lakes

The present study shows the occurrence of 2,2′,3,3′,4,4′,5,5′,6,6′-decabromodiphenyl ether (BDE-209) in microbial biofilms of Pyrenean and Tatra high mountain lakes despite its low vapor pressure and high hydrophobicity. Aerosol air transport is therefore a feasible mechanism for BDE-209 accumulation in sites up to 2688 m above sea level. This compound and other PBDEs exhibit altitudinally-dependent distribution involving higher concentrations with increasing mountain lake elevation. However, the apparently very high enthalpies of the concentration gradients observed, including BDE-209, suggest that bacterial anaerobic debromination also plays a significant role in the resulting altitudinal distributions. This microbial mechanism explains the relative abundances of PBDEs and their within lake differences between rocky and sediment microbial biofilms, thereby showing that the altitudinal pattern observed is not purely due to water temperature control on bacterial activity but also to changes in the availability of anaerobic microenvironments which increase with increasing lake productivity at lower altitudes.     

Generation and analysis of mixed chlorinated/brominated homologs of the halogenated natural product heptachloro-1'-methyl-1,2'-bipyrrole

The 2,3,3′,4,4′,5,5′-heptachloro-1′-methyl-1,2′-bipyrrole (Q1, MBP-79) and further halogenated 1′-methyl-1,2′-bipyrroles (MBPs) are a class of marine natural products repeatedly detected in seafood and marine mammals from all over the world. Only Q1 is currently commercially available as reference standard and the full synthesis of mixed brominated-chlorinated compound is rather complicated. For this reason, synthetic Q1 (240 mg) was transferred into bromine-containing MBPs by UV-irradiation in the presence of bromine. Bromine, which rapidly vanished from the solutions, was re-newed during the reaction in order to generate higher amounts of Br-containing MBPs. A total of ∼150 mg Q1 was transferred after ∼10 min irradiation with high amounts of Br₂ to give 30.5 mg BrCl₆-MBPs along with lower proportions of Br₂Cl₅-, Br₃Cl₄-, Br₄Cl₃- and traces of Br₅Cl₂-MBPs. Longer UV-irradiation in the presence of Br₂ even allowed for the detection of Br₆Cl-MBPs and traces of Br₇-MBP. However, this reaction also provided some unknown by-products. A sample stored in the dark and later in in-door light (no UV irradiation) also eliminated Q1 after 76 d in favour of heptahalogenated MBPs with up to three bromine substituents. The irradiation products were separated on silica, and fractions containing only Q1 and BrCl₆-MBPs were then further fractionated by non-aqueous RP-HPLC. A pure isolate of the major BrCl₆-MBP (∼1.5 mg) was characterized by GC/MS and ¹³C NMR to be 2-bromo-3,3′,4,4′,5,5′-hexachloro-1-methyl-1,2′-bipyrrole (Br-MBP-75). Partial GC enantioseparation of the axially chiral Br-MBP-75 was achieved on a β-PMCD column. A full enantioseparation was managed by enantioselective HPLC using a NUCLEOCEL DELTA S column. Low amounts of pure BrCl₆-MBP enantiomers could be trapped.     

Distribution of perfluorochemicals between sera and milk from the same mothers and implications for prenatal and postnatal exposures

The levels of six perfluorocarboxylates (PFCAs), four perfloroalkylsulfonates (PFASs), and one sulfonamide were measured in paired samples of maternal serum, umbilical cord serum, and breast milk. The maternal and cord sera were strongly correlated with each other for all measured compounds (r > 0.5 and p < 0.01). Nevertheless, there was a significant difference in compound composition profile between the two sera matrices, with a more depletion of the longer chain compounds in cord serum. The transfer efficiency values from maternal to cord serum (TF_CS/MS) decreased by 70% with each increasing unit of -CF₂ chain within a PFCA group, and for perfluorooctanesulfonate (PFOS), by a half compared to perfluorooctanoate (PFOA). In contrast to the strong correlation in concentrations between the two sera matrices, the pattern of compounds in breast milk differed considerably with those in sera. Accordingly, compound- and matrix-specific transfer must be considered when assessing prenatal and postnatal exposure.     

Locating industrial VOC sources with aircraft observations

Observation and characterization of environmental pollution, focussing on Volatile Organic Compounds (VOCs), in a high-risk industrial area, are particularly important in order to provide indications on a safe level of exposure, indicate eventual priorities and advise on policy interventions. The aim of this study is to use the Solid Phase Micro Extraction (SPME) method to measure VOCs, directly coupled with atmospheric measurements taken on a small aircraft environmental platform, to evaluate and locate the presence of VOC emission sources in the Marghera industrial area. Lab analysis of collected SPME fibres and subsequent analysis of mass spectrum and chromatograms in Scan Mode allowed the detection of a wide range of VOCs. The combination of this information during the monitoring campaign allowed a model (Gaussian Plume) to be implemented that estimates the localization of emission sources on the ground.     

城市污水处理厂中全氟化合物的存在及去除效果研究

建立了一种基于超高效液相色谱/串联质谱的方法,实现了对北京3个污水处理厂污水中12种全氟化合物(PFCs)的快速、灵敏地定量分析.结果表明,城市污水处理厂进水和出水中短链的全氟丁酸(PFBA)、全氟戊酸(PFPA)和全氟丁磺酸(PFBS)是主要污染物,其中出水中PFBs的质量浓度高达253 ng/L.污水生物处理后,出...     

Bioremediation With Oxygen-Releasing Solids: A Mathematical Model

The use of oxygen releasing solids in passive wells has become of considerable interest in the bioremediation of groundwater contaminated with hydrocarbons and other biodegradable contaminants. Labor, operating, and maintenance costs of this technology are quite competitive with more conventional techniques in many instances. Because of the small rates of mass transport by transverse dispersion, however, a pin-stripe pattern of alternating contaminant and oxygen distribution is expected downgradient of a line of wells which is unacceptable if it extends beyond the point of compliance downgradient. A mathematical model is presented which permits determination of the maximum well spacing in an array of wells which will yield effective remediation within a specified distance of a plume of contaminated groundwater passing through the array. Transverse dispersion of both oxygen and the contaminant is assumed, and biodegradation is modeled by means of Monod kinetics. Longitudinal numerical dispersion is minimized by the use of a asymmetrical upwind algorithm for modeling advection. Modeling results are presented showing the dependence of model behavior on input parameters.     

Safety management by use of laser mass spectrometry of polychlorinated biphenyls (PCBs) in the processed gas and work environment of a PCB disposal plant

This study demonstrates the applicability of laser mass spectrometry for safety management of the processed gas and the work environment in a polychlorinated biphenyl (PCB) disposal plant. By utilization of laser ionization/ion trapping storage/time-of-flight mass spectrometry (LI-IT-TOFMS), we analyzed gaseous PCBs from scrap capacitors with on-line detection. It was confirmed that few contaminants were detected in the spectrum. By the effect of laser-induced selective ionization, it was considered that there was little interference with the mass range of PCBs. The accuracy of LI-IT-TOFMS when analyzing environmental gas was almost the same as that for the PCB standard gas. It was possible to perform on-line analysis of the work environment for over 2000 h (120 000 data points). LI-IT-TOFMS was thus shown to be a very useful method for ensuring the safety of the work environment in disposal plants for PCBs.     

Levels and source apportionment of volatile organic compounds in southwestern area of Mexico City

Thirteen volatile organic compounds (VOCs) were quantified at three sites in southwestern Mexico City from July 2000 to February 2001. High concentrations of different VOCs were found at a Gasoline refueling station (GS), a Condominium area (CA), and at the University Center for Atmospheric Sciences (CAS). The most abundant VOCs at CA and CAS were propane, n-butane, toluene, acetylene and pentane. In comparison, at GS the most abundant were toluene, pentane, propane, n-butane, and acetylene. Benzene, a known carcinogenic compound had average levels of 28, 35 and 250 ppbC at CAS, CA, and GS respectively. The main contributing sources of the measured VOCs at CA and CAS were the handling and management of LP (Liquid Propane) gas, vehicle exhaust, asphalt works, and use of solvents. At GS almost all of the VOCs came from vehicle exhaust and fuel evaporation, although components of LP gas were also present. Based on the overall results possible abatement strategies are discussed.