Characteristics of chlorofluorocarbons (CFCs) emitted from a municipal waste treatment facility

The emission concentrations of several chlorofluorocarbons (CFCs) were measured from a municipal waste treatment facility (located in Seoul, Republic of Korea) to investigate the emission characteristics of CFCs in the urban environment. To this end, a total of five CFCs (CFC-10, CFC-11, CFC-20, CFC-30, and CFC-113) were analyzed by the thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS) method. The results of this study indicate that the formation of CFC-11 (8.21 ± 1.68 ppb in spring) and CFC-20 (3.92 ± 3.93 ppb in spring) proceeded very actively within the facility. Moreover, CFC-113 was also found in relatively high concentrations (3.34 ± 1.31 ppb in spring) in the treatment facility. Unlike other CFCs, CFC-10 was observed mainly at ambient (and reference) locations and one point inside the treatment facility. In conclusion, emissions of some important CFCs are a prominent process, as they were measured either frequently or abundantly both in winter and spring. It is further indicated that certain CFCs (like CFC-11 and CFC-30) are subject to highly significant seasonal variations.     

Photocatalytic degradation of the fungicide Fenhexamid in aqueous TiO(2) suspensions: identification of intermediates products and reaction pathways

Liquid-chromatography interfaced with time-of-flight mass spectrometry (LC-TOF/MS) was used to separate and characterize the transformation products arising from TiO₂-photocatalytic degradation of the fungicide Fenhexamid (FEX) in aqueous solution under simulated solar irradiation. Prior to identification, irradiated solutions of FEX (10 mg L⁻¹) were concentrated by solid-phase extraction. Assignments of the mass spectra ions were aided by elemental composition calculations, comparison of structural analogues and available literature, and acquired knowledge regarding mass spectrometry of related heterocyclic compounds. The primary transformation intermediates identified were hydroxyl and/or keto-derivatives. Several positional isomers are typically produced as a consequence of the non-selectivity of the OH radical attack. Moreover, products resulted from the cleavage of the amide and NHdichlorophenol bonds were formed. Finally, cyclic - benzo[d]oxazole intermediates are also formed through an intramolecular photocyclization process and cleavage of halogen - carbon bond. In the case of the hydroxy and/or keto-derivatives, the generic fragmentation scheme obtained from the interpretation of the ESI-TOF-MS data cannot be diagnostic to precisely localize the position of the entering substituent on the FEX molecule, and thus to characterize all its possible oxygenated derivatives by assigning a plausible structure with confidence. On the basis of identified products different pathways of photocatalytic degradation of FEX were proposed and discussed.     

Development of a fast instrumental method for the analysis of pharmaceuticals in environmental and wastewaters based on ultra high performance liquid chromatography (UHPLC)-tandem mass spectrometry (MS/MS)

This work describes the development, optimization and validation of an analytical method for the simultaneous detection and identification of 74 pharmaceutically active compounds (PhACs), from various therapeutic groups, in both environmental (ground and surface water) and wastewaters (WW). The method is based on the simultaneous extraction of all target compounds by solid phase extraction (SPE), using a hydrophilic-lipophilic balanced polymer followed by ultra high performance liquid chromatography (UHPLC) tandem mass spectrometry (MS/MS). Two selected reaction monitoring (SRM) transitions have been monitored per compound in order to fulfil the EC guidelines, as well as to ensure an accurate identification of target compounds in the samples. Quantification is performed by internal standard approach, applying 24 specific isotopically labeled compounds. The main advantages of the developed method, besides the selectivity and reliability of the results, is its high throughput. All compounds are extracted in a single step and the instrumental analysis lasts 5 min (NI mode) + 8 min (PI mode), allowing fast throughput of samples. The limits of detection range from 0.01 to 50 ng L⁻¹, depending on the matrix, for most of the compounds. Finally, the method developed has been applied to the analysis of pharmaceuticals in the Ebro river basin (NE Spain).     

Determinations of hexabromocyclododecane (HBCD) isomers in channel catfish, crayfish, hen eggs and fish feeds from China by isotopic dilution LC-MS/MS

HBCD is widely used brominated flame retardant, which is increasingly reported in the environment. A new isotopic dilution LC-MS/MS method was developed to determine three HBCD isomers, α-, β- and γ-HBCD in channel catfish, crayfish, hen eggs and fish feeds in this study, and especially for the first time HBCD isomers composition in crayfish, hen eggs and fish feeds. Soxhlet extractor and GPC cleanup were used, some important steps and crucial parameters were modified and intensified compared with other literatures, and LC and MS/MS conditions were optimized. The limits of quantitation values of 0.01, 0.005 and 0.005 ng g⁻¹ wet weight in channel catfish and crayfish were calculated for three HBCD isomers, respectively; so did 0.1, 0.05 and 0.05 ng g⁻¹ wet weight in eggs and 0.2, 0.1, 0.1 ng g⁻¹ wet weight in fish feeds. Recoveries of α-HBCD, β-HBCD and γ-HBCD were ranged between 75% and 105% for these productions at medium and high-level spiked samples, and between 60% and 85% at low-level spiked samples. The established methods were therefore suitable for the determinations of three HBCD isomers in these productions at trace contamination levels. Moreover, thirty commercial channel catfish, crayfish, hen eggs and fish feeds samples collected from local markets, and thirty home-produced hen eggs from private owners in Hubei province of China, were analyzed to determine whether these productions were contaminated by HBCD. Using the established methods, HBCD emerged in 4 of 30 fish feeds and 3 of 30 home-produced eggs, and in low-ng g⁻¹ wet weight.     

Occurrence of veterinary antibiotics in animal wastewater and surface water around farms in Jiangsu Province, China

The objective of this investigation was to obtain a broad profile of veterinary antibiotics residues in animal wastewater and surface water around large-scale livestock and poultry farms in Jiangsu Province of China. Therefore, 53 samples collected from 27 large-scale animal farms in 11 cities and counties of Jiangsu Province in 2009, were monitored for 10 selected veterinary antibiotics using solid phase extraction and high performance liquid chromatography/electrospray ionization-tandem mass spectrometry (HPLC/ESI-MS/MS) techniques. Ten veterinary antibiotics were found in animal wastewaters, eight antibiotics were detected in pond waters, and animal farm-effluents and river water samples were contaminated by nine antibiotics. The most frequently detected antibiotics were sulfamethazine (75%), oxytetracycline (64%), tetracycline (60%), sulfadiazine (55%) and sulfamethoxazole (51%) which were detected with a maximum concentration of 211, 72.9, 10.3, 17.0 and 63.6 μg L⁻¹, respectively. The maximum concentration of 0.55 μg L⁻¹ for cyromazine, 3.67 μg L⁻¹ for chlortetracycline, 0.63 μg L⁻¹ for sulfadoxine, 39.5 μg L⁻¹ for doxycycline and 0.64 μg L⁻¹ for sulfaquinoxaline were determined in the collected samples. In general, the maximum concentration of the selected veterinary antibiotics was detected in animal wastewaters except for chlortetracycline in animal farm-effluents. In addition, residue levels of selected veterinary antibiotics in animal wastewater and surface water around the farms were related to animal species and have a high spatial variation.     

Seasonal variation of organochlorine contaminants in bonito (Sarda sarda L. 1758) and anchovy (Engraulis encrasicolus L. 1758) in Black Sea region, Turkey

The concentrations of indicator polychlorinated biphenyls (PCBs) and organochlorine insecticides were determined in bonito (Sardasarda L. 1758) and anchovy (Engraulisencrasicolus L. 1758) from the Black Sea, Turkey. Concentrations of total indicator PCBs ranged between <1-17.0 in bonito, and <1-17.5 ng/g fresh weight in anchovy, and total of 1,1,1-trichloro-2,2-bis-chlorophenyl-ethane and its metabolites’ (DDTs) concentrations ranged between 13.4-26.3, and 2.96-19.0 ng/g fresh weight in bonito and anchovy respectively. PCB 52, p,p′-DDE and endosulfan (α + β) were found dominant in both of the fish species. Except endosulfan, and some DDT metabolites, none of the studied organochlorine pesticides was detected in the fish samples. Concentrations of PCBs in anchovy were found higher than those in bonito, whereas DDT and endosulfan concentrations were found similar in both of the fish species. All of the fish samples had residue concentrations below the maximum residue limits (MRL) recommended by FAO/WHO Codex Alimentarius Commission.     

Screening of pharmaceuticals and hormones at the regional scale, in surface and groundwaters intended to human consumption

As part of a regional screening to evaluate the risk, for the health of populations, to certain classes of emerging substances, several families of pharmaceuticals and hormones were looked for in waters intended to drinking. Thus, 52 substances were investigated in 71 surface waters and 70 groundwaters. Results indicate that no water was free of pollutants, regardless of its origin (surface or groundwater) and the season of collect. The pharmaceuticals most frequently detected and with the highest concentration levels were salicylic acid, carbamazepine and acetaminophen. Among hormones, testosterone, androstenedione and progesterone were detected in almost all the samples. Globally the groundwaters were less contaminated than surface waters in regards pharmaceuticals frequencies and levels. On the other side, androgens and progestagens were present with comparable frequencies and levels in both compartments. The risk linked to the presence of these substances on human health is discussed.     

Pilot scale application of a method for the analysis of perfluorinated compounds in surface soils

A growing number of studies now indicate that perfluorinated compounds (PFCs) are globally distributed in the environment. Their widespread distribution and presence in remote locations has led to questions about the importance of atmospheric and oceanic transport. Describing their distribution in surface soils is also an essential but neglected element in developing a comprehensive understanding of their occurrence in the environment. Soils are the critical link between global atmospheric and hydrologic processes where both local and distant contaminants can accumulate and be released into aquatic and terrestrial communities. Because PFC concentrations in soils will influence ground and surface water, wildlife, and crops, methods to accurately measure PFCs in soil are clearly needed. To help answer this need, we developed a method for the analysis of nine perfluorinated carboxylic acids and four perfluorinated sulfonic acids in soil. Samples from six nations (n = 10 per nation) were analyzed by LC-MS/MS to demonstrate the method performance parameters and to make preliminary observations about the occurrence of the PFCs in soils in different parts of the world. The resulting method shows acceptable performance characteristics for the target compounds in most soils while documenting the widespread occurrence of PFCs in surface soils.     

Analysis of mixed halogenated dibenzo-p-dioxins and dibenzofurans (PXDD/PXDFs) in soil by gas chromatography tandem mass spectrometry (GC-MS/MS)

Mixed halogenated dibenzo-p-dioxins and dibenzofurans (PXDD/PXDFs, X = Br, Cl) are formed through combustion processes, and may be more toxic than their corresponding chlorinated and brominated analogues. With 4600 potential congeners, limited analytical standards, and complex environmental matrices, PXDD/PXDFs present a significant analytical challenge. Gas chromatography tandem mass spectrometry (GC-MS/MS) offers both selectivity and sensitivity through multiple reaction monitoring of unique transitions in a novel approach to PXDD/PXDF congener identification. Method validation was performed through analysis of soil samples obtained from a recycling plant fire. Of the PXDD/PXDFs examined, monobromo-dichlorodibenzofuran was the most prevalent, ranging in concentration from 8.6 ng g⁻¹ to 180 ng g⁻¹. Dibromo-dichlorodibenzo-p-dioxin, a compound of toxicological concern, ranged from 0.41 ng g⁻¹ to 10 ng g⁻¹. Concentrations of PXDD/PXDFs were between 6% and 10% that of the corresponding polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDFs), with the exception of dibromo-dichlorodibenzo-p-dioxin concentrations, which were 36% that of tetrachlorodibenzo-p-dioxins. Higher levels of polybrominated PXDD/PXDFs may indicate a significant bromine source was present during combustion.     

Emission and burnt smell characteristics from combustion experiments with defined materials

Typical burnt smell often results from fire accidents or in general from incomplete combustion. Recently, eleven compounds were identified, which are basically responsible for this odour. When analyzing residual materials from different fire accidents, the pattern that means the relative ratios of these compounds among each other varies strongly, although always causing a burnt smelling. Consequently, lab-scale combustion experiments were performed in order to investigate the influence of defined materials from domestic environment on the burnt-smell fingerprints. Furthermore, the occurrence of other polar and higher molecular combustion products was studied. It was found that under good combustion conditions, the burnt smell patterns resulting from the single materials were astonishingly consistent, mostly dominated by methylphenols or naphthalene. No correlation could be found between these ‘fingerprints’ and combustion product groups identified by GC/MS-screenings. LC/MS/MS-measurements especially pointed at the existence of higher molecular weight phenolic and acidic functionalized compounds in the combustion residues.