Gas/particle partitioning of atmospheric PCDD/Fs in a satellite town in Eastern China

Gas/particle partitioning of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in ambient air was investigated in a satellite town in Eastern China from April 2007 to January 2008 comprehending large temperature variations (from 3 to 34 °C, daily average). Molecular weight, molecular structure and ambient temperatures are the three major factors that govern the gas/particle partitioning of atmospheric PCDD/Fs throughout the year. Generally, good agreements were obtained (except for winter) between measured particulate fractions and theoretical estimates of both the Junge–Pankow adsorption model and Harner Bidleman absorption model using different sets of subcooled liquid vapor pressure and octanol–air partition coefficient (K_oa), respectively. Models utilizing estimates, derived from gas chromatographic retention indices (GC-RIs), are more accurate than that of entropy-based. Moreover, during winter, the K_oa-based model using the GC-RIs approach performs better on lower chlorinated PCDD/Fs than that of -based. Furthermore, possible sources of mismatch between measured and predicted values in winter (3–7 °C) were discussed. Gas adsorption artifact was demonstrated to be of minor importance for the phenomena observed. On the other hand, large deviations of slopes (m_r) and intercepts (b_r) in logK_p vs. plots from theoretical values are observed in the literature data and these are found to be linearly correlated with ambient temperatures (P<0.001) in this study. This indicates that the non-equilibrium partitioning of PCDD/Fs in winter may be significantly influenced by the colder temperatures that may have slowed down the exchange between gaseous and particulate fractions.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

黄钠铁矾渣制备透明氧化铁黄的研究

研究了以黄钠铁矾渣为原料,采用滴加法制备透明铁黄的工艺条件,讨论了亚铁浓度、温度、通气量、搅拌速度及添加剂用量等因素对铁黄制备的影响.用XRD和TEM对产品进行表征.结果表明,铁黄粒子呈针状;长轴为95～125 nm,短轴为18～25 nm;无团聚现象,单分散性好.     

液相色谱-串联质谱法检测甲醛暴露产生的两种DNA加合物

针对两种甲醛-DNA加合物,N~6-羟甲基腺嘌呤(N~6-HOMe-d A)和N2-羟甲基鸟嘌呤(N_2-HOMe-d G),本实验室建立了基于液相色谱串联质谱的分析方法,以便从DNA分子水平上探讨甲醛暴露对DNA的损伤作用机理,其中[~(15)N_5]N~6-Me-d A和[~(13)C_(10)~(15)N_5]N_2-Me-d G为内标;液相分离所用色谱柱为Thermo Polar Advantage II C_(18);方法的精密度较好(RSD5%)、灵敏度较高(检出限分别为0.014和0.0064 ng·m L~(-1))、回收率良好(94.9%~111%).后用小牛胸腺DNA进行体外染毒实验,设置甲醛染毒的浓度梯度(0.001,0.01,0.05,0.1,0.5和1 mmol·L~(-1))和染毒时间组(0、2、4、8、12、16、24 h),利用建立的LC-MS/MS方法检测了DNA中N~6-HOMe-d A和N_2-HOMe-d G的含量.结果表明,两种甲醛-DNA加合物N~6-HOMe-d A和N2-HOMe-d G的量与甲醛暴露存在剂量-反应和时间-反应关系.     

周期换向电凝聚法处理活性嫩黄X-6G模拟染料废水研究

分别采用铝和铁板作为两极,通过周期性改变电流方向使电极钝化和极化现象得以减缓或消失,并实现两极均可溶,利用铝、铁系无机絮凝剂共存时可提高处理效果的特点,对活性嫩黄X-6G模拟染料废水进行处理;通过单因素条件实验,获得了该方法的最佳处理条件。利用紫外-可见光分光光度法和飞行质谱等手段对废水处理过程的脱色反应机理进行了分析。研究表明:最佳条件下,采用周期换向电凝聚法处理活性嫩黄X-6G模拟染料废水30 min,可使模拟废水脱色率达到98%以上,COD去除率可达77%以上;处理过程中除大部分染料分子直接被电凝聚气浮或沉降导致脱色外,部分活性嫩黄X-6G染料分子在电解作用下首先断裂成不同结构的中间体,含有双键的中间体再发生加氢或氧化反应,使双键结构遭到破坏而脱色。     

多尺度分割与特征优选下的盐碱地提取

土地盐渍化作为一种土壤灾害,严重制约着社会经济与农业的发展。对盐碱地进行实时监测,可为盐碱地的评价改良提供科学依据。由于盐碱地的信息复杂、提取精度不高,因此本文以高分六号(GF-6)卫星遥感影像为数据源,采用分形网络演化算法(fractal net evolution approach,FNEA)进行影像对象的多尺度分割,从面向对象的角度减少高分影像分类结果中的椒盐噪声问题,通过计算图像对象的局部方差和变化率来确定适宜的盐碱地分割尺度。利用基于特征选择的相关性算法(correlations-based feature selection,CFS)与Relief F算法分别对由光谱、纹理、形状、遥感指数构成的初始特征空间进行特征优选,精简特征子集,解决特征数量冗余问题,以此来优化随机森林对盐碱地提取精度。结果表明:CFS约简后的特征子集更小,精度更高,说明在盐碱地提取过程中,筛选特征数目能够减小冗余数据对提取精度的影响。CFS优化后的随机森林对盐碱地的提取效果较好,该方法总体分类精度达到83.7%。     

光合细菌对2,4,6-三氯苯酚的降解特性研究

研究了混合光合细菌PSB-DR在不同光照、接种量和pH值下对2,4,6-三氯苯酚(2,4,6-TCP)的生物降解特性,确定了PSB-DR生物降解2,4,6-TCP的优化控制条件.结果表明,光照培养下,接种量30%,初始pH值7.0时2,4,6-TCP降解效率最高.在此条件下,50mg/L的2,4,6-TCP经5d后降解率达到82.3%.培养基中醋酸钠的加入对2,4,6-TCP降解有明显的抑制作用.PSB-DR静息细胞对2,4,6-TCP的降解符合高浓度底物抑制的酶促反应类型,其降解动力学参数rmax=1.746h-1,Km=38.333mg/L,Ki=260.87mg/L.     

电弧离子镀HY11涂层的1200℃高温氧化行为研究

目的研究真空电弧镀方法制备的超高温金属涂层HY11在1200℃下的高温氧化行为。方法用真空电弧镀技术(AIP)在单晶镍基高温合金DD6上制备超高温金属涂层HY11,采用HB 5258循环氧化方法进行1200℃循环氧化试验,通过试验过程中试样质量变化评价涂层氧化寿命。通过扫描电镜(SEM)分析氧化后的试样显微形貌,用X-射线衍射仪分析涂层材料的相结构,通过氧化速率对涂层材料抗氧化性能进行表征。结果采用单靶真空电弧镀技术制备的HY11涂层,经过1050℃真空条件下扩散2h,涂层厚度为50～60?m,扩散区厚度为10～15μm,涂层微观组织均匀致密,涂层合金界面清晰平整。DD6合金的1200℃循环氧化寿命仅仅为4 h,HY11涂层在1200℃的循环氧化寿命近300 h。沉积态涂层HY11相结构主要以Al_2O_3和Ni3Al为主。氧化后涂层材料表面形成的氧化膜以Al_2O_3为主。结论 HY11涂层在1200℃的循环氧化寿命为298 h,极大地提高了DD6合金在1200℃的循环氧化寿命。     

热障涂层对DD6单晶高温合金高周疲劳性能的影响

目的研究电子束物理气相沉积热障涂层对单晶高温合金高周疲劳性能的影响,为热障涂层在涡轮叶片上的应用提供技术支持。方法采用真空电弧镀和电子束物理气相沉积工艺制备YSZ热障涂层,进行900℃条件下高周疲劳性能测试,采用扫描电镜对测试后的试样表面、断口形貌进行观察与分析。结果在900℃、380 MPa条件下,带涂层的DD6单晶试棒循环次数(Nf)超过了107,420 MPa条件下超过了106。通过对DD6单晶试棒断口分析,失效后的带涂层试棒仍以DD6单晶常见滑移解离形式发生破坏。结论高周疲劳性能测试条件下,带YSZ热障涂层的试棒中粘结层率先产生垂直微裂纹,但是裂纹扩展延伸中发生氧化钝化,之后DD6基体沿正常的滑移方向从表面向内部疲劳扩展,带涂层的试棒疲劳裂纹并非由涂层微裂纹直接扩展形成,热障涂层对DD6单晶高温合金高周疲劳性能影响较小。     

SF6绝缘设备的环保与经济运行维护

SF6气体作为一种优秀灭弧介质在高压灭弧领域得到了十分广泛的应用.同时,SF6气体的一些弊端,如泄漏对人体与环境的影响也体现出来,通过介绍SF6气体的环保要求和运行、检测、维护及未来的发展方向.使得其在环境保护的前提下,在电力系统得到更加广泛的应用.