钢渣掺量对泡沫混凝土砌块性能的影响

泡沫混凝土是一种环保、节能的保温隔热材料,以其优良的保温性能,受到越来越多研究者的关注。对钢渣的特性进行了分析测试,对钢渣不同掺量对泡沫混凝土砌块特性的影响进行了研究,结果表明,采用添加5％～35％钢渣所制备的钢渣泡沫混凝土砌块,其密度等级为JC／T1062—2007中的B10级,掺人5％、15％钢渣的泡沫混凝土抗压强度达到A3．5等级,掺人25％、35％钢渣的泡沫混凝土抗压强度达到A2．5等级。随着钢渣掺量的增大,抗压强度、抗折强度降低,吸水率增大。在同一钢渣掺量的情况下,泡沫混凝土砌块的抗压强度变化率增加显著,而且随着钢渣的加入量升高而增大。钢渣的加入有利于提高泡沫混凝土砌块的后期抗压强度。     

Implications of geographic variability on Comparative Toxicity Potentials of Cu, Ni and Zn in freshwaters of Canadian ecoregions

Current methods of estimating potential environmental impacts of metals in hazard and Life Cycle Impact Assessment (LCIA) do not consider differences in chemistry and landscape properties between geographic sites. Here, we developed and applied a model for regional aquatic impact characterization of metals using an updated method for estimating environmental fate factor (FF), bioavailability factor (BF) and aquatic ecotoxicity factor (EF). We applied the model to analyze differences in Comparative Toxicity Potentials (CTPs) of Cu, Ni and Zn for 24 Canadian ecoregions. The combined impacts of regional variability in ambient chemistry (in particular DOC, pH and hardness) and landscape properties (water residence time) can change the CTPs of these metals for freshwater by up to three orders of magnitude and change the relative ranking of metal hazard between ecoregions. Variation among Canadian freshwater chemistries and landscape characteristics influence the FFs within two orders of magnitude, BFs within two orders of magnitude for Ni and Zn and four orders of magnitude for Cu, and EFs within one order of magnitude. Sensitivity of metal FFs to environmental parameters alone spans three orders of magnitude when a constant water chemistry was used for all ecoregions. These results indicate that application of regionalised metal CTPs can have a significant influence in the analysis of ecotoxicological impacts in the life cycle assessment of products and processes.     

Use of recycled fine aggregate in concretes with durable requirements

The use of construction waste materials as aggregates for concrete production is highly attractive compared to the use of non-renewable natural resources, promoting environmental protection and allowing the development of a new raw material. Several countries have recommendations for the use of recycled coarse aggregate in structural concrete, whereas the use of the fine fraction is limited because it may produce significant changes in some properties of concrete. However, during the last decade the use of recycled fine aggregates (RFA) has achieved a great international interest, mainly because of economic implications related to the shortage of natural sands suitable for the production of concrete, besides to allow an integral use of this type of waste. In this study, the durable behaviour of structural concretes made with different percentage of RFA (0%, 20%, and 30%) is evaluated. Different properties related to the durability of concretes such as absorption, sorptivity, water penetration under pressure, and carbonation are determined. In addition, the results of compressive strength, static modulus of elasticity and drying shrinkage are presented. The obtained results indicate that the recycled concretes have a suitable resistant and durable behaviour, according to the limits indicated by different international codes for structural concrete.     

Redistribution of free tropospheric chemical species over West Africa: radicals (OH and HO₂), peroxide (H₂O₂) and acids (HNO₃ and H₂SO₄)

The purpose of this paper is to study the redistribution of chemical species (OH, HO₂, H₂O₂, HNO₃ and H₂SO₄) over West Africa, where the cloud cover is ubiquitously present, and where deep convection often develops. In this area, because of these cloud systems, chemical species are redistributed by the ascending and descending flow, or leached if they are soluble. So, we carry out a mesoscale study using the Regional Atmospheric Modelling System (RAMS) coupled to a code of gas and aqueous chemistry (RAMS_Chemistry). It takes into account all processes under mesh. We examine several cases following the period (November and July), with inputs emissions (anthropogenic, biogenic and biomass burning). The radicals OH and HO₂ are an indicator of possibilities for chemical activity. They characterize the oxidizing power of the atmosphere and are very strong oxidants. The acids HNO₃ and H₂SO₄ are interesting in their transformation into nitrates and sulfates in precipitation. In November, when photochemistry is active during an event of biomass burning, concentrations of chemical species are higher than those of November in the absence of biomass burning. The concentrations of nitric acid double and sulfuric acid increases 70 times. In addition, the concentrations are even lower in July if there is a deep convection. Compared to measures of the African Monsoon Multidisciplinary Analysis (AMMA), the results and observations of radicals OH and HO₂ are the same order of magnitude. Emissions from biomass burning increase the concentrations of acid and peroxide, and a deep convection cloud allows the solubility and the washing out of species, reducing their concentration. Rainfalls play a major role in solubility and washing out acids, peroxides and radicals in this region.     

Salinity increases mobility of heavy metals in soils

The effect of salinity induced by CaCl₂, MgCl₂, NaCl and Na₂SO₄ on the mobility of Cu, Cd, Pb and Zn was studied. An increase of ionic strength by any salts promoted a higher release of Cd than the others metals. When CaCl₂ and NaCl were applied, Cd and Pb showed the highest degree of mobilization. When MgCl₂ was applied, Cd and Cu were mobilized the most. Finally, an increase of Na₂SO₄ also promoted the strongest mobilization of Cd and Cu.As the total heavy metal content was higher, the percentage of Pb and Cu released upon salinization decreased, indicating that these metals are strongly bound to soil constituents. An increase of carbonates in the soil promoted a higher release of Pb for all used salts and for Zn when MgCl₂ and NaCl were used. This indicates that Pb and Zn are adsorbed on the surface of carbonate crystals. An increase of fine particles promoted a decrease of percentage of released Cd for all salts, indicating that Cd is strongly retained in the fine fractions.The main mechanism regulating Pb and Cd mobility was competition with Ca²⁺ for sorption sites followed for metal chloro-complexation, association between the Cd/Pb-sulfates and competition with Mg²⁺. The main mechanism regulating Cu mobility was the formation of Cu-sulfate, followed by competition with cations (Mg > Ca) and chloride. For Zn, competition with Ca²⁺ for sorption sites was the most important process for its mobility; followed by Zn-sulfate association and, finally, chloride and competition with Mg with the same effect.     

燃煤电厂袋式除尘器滤料耐氧化性能试验研究

燃煤电厂锅炉烟气中含有SOx和NOx,会氧化腐蚀滤料。试验研究了燃煤电厂布袋除尘器滤料断裂强力与运行时间的关系。结果表明,滤料在酸性环境中会被氧化同时断裂强力下降,但断裂强力下降后均会出现反弹,后处理工艺可提高滤料的抗氧化性能,但会降低滤料的断裂强力。     

直埋式光纤传感钻孔注浆耦合材料配合比试验研究

采用钻孔埋设传感光纤是岩土体分布式光纤传感直埋技术的一种,为使传感光纤与周围土体变形协调,通常在钻孔内注浆,使传感光纤与周围岩土介质凝固为一体。根据对浆液凝固时间无特定要求和有特定要求的2种情况,通过试验研究了钻孔注浆耦合材料、配合比及其凝固后强度。结果表明:通过调整水泥与膨润土的比例以及水固比可以控制凝固体的无侧限抗压强度,使其强度与原位岩土体的近似相同;添加适量的水玻璃可以加快浆液的凝固速度。针对石家庄某隧道原位土体的力学参数,得到了满足现场施工要求的最优配合比,使浆液凝固后的力学指标与原位土体的近似相同。     

断裂构造对斜坡应力场影响的数值模拟及成灾机理研究

断裂构造及活动强度对斜坡体的应力场分布具有重要的影响。采用基于强度折减法的有限元法,分别以正断层和逆断层与斜坡体的组合关系为例,剖析了断裂构造对斜坡体应力场的影响及成灾机理,揭示了含有断层的斜坡体塑性区的贯通过程。研究表明,包含断层的斜坡体在应力分布特征及斜坡变形破坏机理方面与无断层的斜坡体有较大差别:含断层的斜坡体在坡面和断层面附近的最大主应力迹线与坡面或断层面相平行,在天然状态下,塑性区同时出现在坡脚和断层面后方,随着折减系数的增大,塑性区分别从坡脚和断层面后方向坡体深部和上部发展,直至断层面前后两个塑性区相贯通,坡体发生破坏,并且对坡体变形破坏的影响程度以逆断层最强,其次为正断层,断层不活动时较弱。     

两种不同的恒载升温方式下的钢材破坏机理分析

通过对我国建筑结构用钢在拉伸和压缩两种方式下的恒载升温试验,进行了5次受拉试件和2次受压试件的对比研究,根据试验中材料的各自变形规律,对其破坏机理进行了理论分析;从材料屈服的定义出发,给出了恒载升温拉伸试验中的参数(对应温度下的临界荷载水平),并与恒载升温压缩试验中的参数项进行了对比,指出受压构件和受拉构件的高温屈服强度是不同的,因此在钢结构建筑的耐火设计中应分别取不同的安全系数。     

约束高强度Q460钢柱抗火性能分析

为了研究高强度约束钢柱在火灾下的反应,根据高强度结构钢Q460在高温下的力学性能参数,建立了约束高强度钢柱受火分析模型,得到了高强度约束钢柱在火灾下的轴向位移、跨中挠度、最大应力以及临界温度。采用有限元分析对理论结果进行了验证,两者吻合很好。利用验证过的该文计算方法计算了2种荷栽比、长细比和约束刚度比条件下的高强钢柱的抗火性能;采用CECS200:2006的力学性能参数计算了约束普通钢柱的抗火性能。通过对高强钢和普通钢的抗火性能分析发现,轴向约束明显降低钢柱的临界温度,长细比、荷载比越大,临界温度越低;高强钢的抗火性能要优于普通钢。