Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

SO2在碳钢初期大气腐蚀中的作用

通过自建的模拟大气腐蚀系统,借助金相显微镜、扫描电镜(SEM/EDX)、X-射线衍射(XRD)和x-射线光电子能谱(XPS),研究了SO2对碳钢初期大气腐蚀行为的影响,并进一步用原子力显微镜从更微观的角度观察了在SO2环境中初期阶段腐蚀形貌变化.研究结果表明:在SO2污染大气环境中,随SO2浓度的升高碳钢腐蚀加快.在体积分数为5×10(-6)SO2的大气环境中,碳钢和耐候钢表面腐蚀主要以条状物生长,随着SO2浓度的升高,腐蚀产物的形貌发生改变,在体积分数为5×10(-5)SO2的大气环境中,条状锈和胞状锈同时生长.在锈层中S元素以FeSO4·4H2O的形式存在,腐蚀产物中还有γ-FeOOH.SO2在初期阶段加速了碳钢的腐蚀,降低了碳钢的耐蚀性.     

湖北省某钢铁厂工业区及周边铅污染调查

为了解湖北省某钢铁厂周边铅污染的现状,通过对钢铁厂工业区及其周边乡村的土壤、蔬菜、居民体内和排污渠污泥中铅元素含量的研究,其结果表明:钢铁厂周围的土壤、蔬菜、居民均受到了一定程度的铅等重金属元素的污染,其含量高于国家标准或正常范围;钢铁厂工业区周边土壤铅污染主要由于工业废气(烟尘)扩散沉降和废水灌溉引起;污染区人体尿样中铅元素含量(116～160 ng/mL)普遍超标,头发样(2.09～12.04 μg/g)基本正常,尿样比头发样更能显示铅等重金属元素在人体内的分布特征.     

塑烧管除尘器在冶金精轧线的应用

冶金精轧线烟气烟尘含油含水，采用传统的布袋除尘等方式难以治理。塑烧管具有刚性结构、高过滤效率、压降稳定、疏水疏油性、防静电等特性，适合于治理含油含水的烟气。塑烧管除尘器在冶金精轧线的应用取得了良好的效果。     

我国废钢铁资源的可持续利用政策

本文概述了我国废钢铁资源回收利用的现状以及钢铁工业对废钢铁资源的需求现状，用三种不同的模型预测了未来钢铁工业的发展对废钢铁资源的需求，提出了废钢铁资源可持续利用存在的问题和政策建议。     

溶胶凝胶法制备铜催化剂及其稳定性的研究

介绍了利用溶胶凝胶方法制备铜系催化剂，并考察了制备过程中各个工艺参数对铜系催化剂稳定性的影响。通过优化催化剂的设计和制备方法，可有效地改善Cu^2＋的溶出问题，使该类催化剂具有广阔的应用前景。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。     

Recycling and recovery routes for incinerated sewage sludge ash (ISSA): A review

The drivers for increasing incineration of sewage sludge and the characteristics of the resulting incinerated sewage sludge ash (ISSA) are reviewed. It is estimated that approximately 1.7 million tonnes of ISSA are produced annually world-wide and is likely to increase in the future. Although most ISSA is currently landfilled, various options have been investigated that allow recycling and beneficial resource recovery. These include the use of ISSA as a substitute for clay in sintered bricks, tiles and pavers, and as a raw material for the manufacture of lightweight aggregate. ISSA has also been used to form high density glass–ceramics. Significant research has investigated the potential use of ISSA in blended cements for use in mortars and concrete, and as a raw material for the production of Portland cement. However, all these applications represent a loss of the valuable phosphate content in ISSA, which is typically comparable to that of a low grade phosphate ore. ISSA has significant potential to be used as a secondary source of phosphate for the production of fertilisers and phosphoric acid. Resource efficient approaches to recycling will increasingly require phosphate recovery from ISSA, with the remaining residual fraction also considered a useful material, and therefore further research is required in this area.     

SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。