生物膜细菌藻酸盐对Cu2+的吸附动力学研究

以生物膜中提取的细菌藻酸盐为原料制备藻酸钙为吸附剂,对水溶液中的Cu2+进行了吸附动力学研究.试验结果表明,吸附时间、溶液初始pH和吸附剂投加量对藻酸钙吸附Cu2+影响显著.当溶液初始pH为4.0、Cu2+初始质量浓度为100 mg/L、吸附剂投加量为0.7 g/L时,藻酸钙对Cu2+的平衡吸附量为56.15 mg/g.水溶液中Cu2+在藻酸钙上的吸附动力学过程可用准二级动力学方程来模拟.吸附等温线研究表明,藻酸钙吸附Cu2+的过程可用Langmuir和Freundlich模型来描述.100 mmol/L 乙二胺四乙酸(EDTA)可有效解吸95.6%的Cu2+,实现Cu2+的回收与吸附剂的重复利用.     

Treatment of IGCC power station effluents by physico-chemical and advanced oxidation processes

The aim of this work was to improve the quality of aqueous effluents coming from the Gasification Unit in an Integrated Gasification Combined Cycle (IGCC) Thermoelectric Power Station, with the purpose of fulfilling the future more demanding normative. To this end, an integral wastewater treatment including coagulation, flocculation, neutralization, photocatalytic oxidation, and ion-exchange has been studied. A final scheme has been proposed to remove pollutants. All the parameters of the treated wastewater are below pouring specifications. In the first stage, the wastewater was treated with CaCl2 (optimal dose=11 g CaCl2/g F-) as coagulant and a commercial anionic polyelectrolyte (optimal dose=0.02 g/g F-) as flocculant to remove fluoride ions (99%) and suspended solids (92%). The water was then neutralized, improving the degree of transmission of ultraviolet light, allowing the faster photo-degradation of pollutants. The photochemical study included different systems (H2O2, UV/H2O2, Fenton, Fenton-like, UV/Fenton, UV/Fenton-like and UV/H2O2/O2). In the Fenton-like system, the influence of two parameters (initial concentration of H2O2 and amount of Cu(II)) on the degradation of cyanide and formate (taken as the reference of the process) was studied. Experimental results were fit using neural networks (NNs). Results showed that the photocatalytic process was effective for total cyanide destruction after 60 min, while 180 min was needed to remove 80% of formates. However, a more simple system with UV/H2O2/O2 yields similar results and is preferred for industrial application due to fewer complications. Finally, an ion-exchange process with Amberlite IRA-420 was proposed to remove the excess of chlorides added as a consequence of the initial coagulation process.     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.     

Treatment of tannery wastewater by electrocoagulation

Treatment of tannery wastewater by electrocoagulation with low cell current(≤1A)and soluble electrodes(mild steel electrodes and aluminum electrodes)was studied.Compared with aluminum electrodes,mild steel electrodes were more effective for the removal of sulfide,with a removal efficiency of over 90%.But during the treatment process,black color precipitate typical to iron(Ⅱ)sulfides was produced.While aluminum electrodes were effective to eliminate the colority of the effluent,the removal efficiency of sulfide was lower than 12%.The mechanisms of the removal of chemical oxygen demand,ammonia,total organic carbon,sulfide and colority with the two soluble electrodes(mild steel and aluminum electrodes)were discussed in detail.In order to exert the predominance of diffenent types of electrodes,the tannery wastewater was treated using mild steel electrodes first followed by the filter and finally by the aluminum electrodes,the elimination rates of chemical oxygen demand,ammonia,total organic carbon,sulfide and colority were 68.0%,43.1%,55.1%,96.7% and 84.3%,respectively,with the initial concentrations 2413.1 mg/L,223.4 mg/L,1000.4 mg/L,112.3 mg/L and 256 dilution times,respectively.The absorbance spectra and energy consumption during electrocoagulation process were also discussed.     

剪切型软钢阻尼器焊接热影响研究

剪切型软钢阻尼器是由连接板、翼缘板、横向加劲肋和耗能板等4个构件组成,通过焊接技术组合起来的一种减震装置,在减震技术领域被广泛应用的低屈服点软钢阻尼器,各构件连接的技术和机理对阻尼器的工作性能有着直接的影响.运用数值模拟与盲孔法实验测量相结合的方式,以焊接电流为变量,进行焊接剪切型阻尼器的焊接残余应力分布规律的研究.结...     

铜/海泡石催化氧化CO和催化还原NOx性能的研究

采用浸渍法制备铜/海泡石催化剂,考察其催化氧化CO和催化还原NOx性能以及预处理条件和掺加稀土元素对其性能的影响,并用XRD、BET技术对其进行表征.盐酸和硝酸改性的海泡石载体都能使铜/海泡石在190℃左右将CO完全转化;稀土元素的添加对铜/海泡石催化氧化CO的活性没有显著影响;铜/海泡石对NOx有一定的催化还原性能,添加稀土后对其催化还原活性有明显促进作用.     

德兴铜矿周边土壤中铜的形态分布

采用Tessier连续逐级形态提取方法,研究了德兴铜矿土壤中铜存在的化学形态和生物可利用性。结果表明,德兴铜矿各功能区表层土壤均已受到不同程度的Cu污染,分布趋势为尾矿库>采矿区>菜田>稻田>生活区。表层土壤中Cu的直接利用性不高,但可利用态Cu所占比例较高,可能造成潜在的生态毒性。土壤剖面中Cu的化学形态分布趋势为残余态>有机结合态>氧化态>碳酸盐结合态>可交换态,各态的跃迁能力都较差,基本不会威胁到该地区的地下水源。     

某型波段开关瞬动动作特性及失效机理

目的 研究某型波段开关瞬动动作特性及磨损失效机理。方法 通过建立瞬动机构物理模型,进行瞬动机构滑动件受力分析、转动力矩随旋转角度变化分析,研究瞬动开关瞬动动作特性,分析并探讨瞬动机构的磨损失效机理。结果 在波段开关的瞬动角度范围内,瞬动力矩随着转动角度θ的增加呈先增大、后减小的趋势。在瞬动初始状态,旋转力矩为最小值1.2 kg·cm;当瞬动处于中间位置（瞬动角度为16°）时,转动力矩为最大值1.5 kg·cm;随着转动角度θ继续增大,转动力矩不断减小,最终恢复至初始值,与实物瞬动复位功能相符。瞬动机构滑动件受基座的正压力N随转动角度θ的增加而增大。基座塑料受过大压力产生磨损,使转动（复位）力矩降低,滑动件无法复位,导致瞬动功能失效。结论 某型波段开关瞬动功能由滑动件钢球、基座长弧形斜坡、接触压力保证,弧面磨损致使钢球所受接触压力分量不足,导致瞬动功能失效,该失效机制为疲劳磨损失效。可通过改变基座材料、滑动件结构或材料以及改善瞬动机构工作条件来提高瞬动寿命和可靠性。     

SIMP钢在高温液态铅铋合金中的腐蚀行为

目的 研究SIMP钢在不同溶解氧浓度的高温液态铅铋合金中长期浸泡后腐蚀产物的变化规律。方法 在550 ℃静态液态铅铋合金(饱和氧状态和贫氧状态)中对SIMP钢进行500、1 000、2 000、3 500、5 000 h的腐蚀试验。通过观察腐蚀后试样的表面和截面形貌,进行物化分析,对比不同时间下腐蚀层厚度以及腐蚀产物结构的变化,得出溶解氧浓度和浸泡时间的变化对腐蚀产物的影响规律。结果 在贫氧环境中,SIMP钢的腐蚀类型主要为氧化腐蚀,氧化腐蚀产物具有双层结构,外层为Fe-Cr尖晶石氧化层,内层为富铬氧化物与基体的混合物层;在饱和氧环境,SIMP钢腐蚀产物则具有3层结构,外层为Fe3O4磁铁矿层,中层为Fe-Cr尖晶石氧化层,最内层为富铬氧化物与基体的混合物层。结论 溶解氧浓度和浸泡时间的变化对腐蚀产物的结构和厚度产生了显著影响,SIMP钢在贫氧环境中呈现出优异的耐腐蚀性能。     

高强钢绞线-聚合物砂浆加固低强度砖砌体的试验研究

提出了采用高强钢绞线-聚合物砂浆技术对低强度砖墙进行抗震加固的方法,通过一片采用高强钢铰线-聚合物砂浆面层加固的墙体和一片未加固的对比墙体的低周反复荷载试验,对该加固方法进行了检验。详细地分析了这两片墙体的破坏形态、极限承载力、滞回特性、耗能能力及刚度退化等抗震性能,并提出了加固墙体的抗剪承载力计算公式。研究结果表明,高强钢绞线-聚合物砂浆加固方法能有效地提高墙体的极限承载力,改善墙体的延性和刚度退化,并提高墙体的能量消耗能力,从而提高墙体的抗震性能。