Hazard property classification of waste according to the recent propositions of the EC using different methods

Hazard classification of waste is a necessity, but the hazard properties (named “H” and soon “HP”) are still not all defined in a practical and operational manner at EU level. Following discussion of subsequent draft proposals from the Commission there is still no final decision. Methods to implement the proposals have recently been proposed: tests methods for physical risks, test batteries for aquatic and terrestrial ecotoxicity, an analytical package for exhaustive determination of organic substances and mineral elements, surrogate methods for the speciation of mineral elements in mineral substances in waste, and calculation methods for human toxicity and ecotoxicity with M factors.In this paper the different proposed methods have been applied to a large assortment of solid and liquid wastes (>1 0 0).Data for 45 wastes – documented with extensive chemical analysis and flammability test – were assessed in terms of the different HP criteria and results were compared to LoW for lack of an independent classification. For most waste streams the classification matches with the designation provided in the LoW. This indicates that the criteria used by LoW are similar to the HP limit values.This data set showed HP 14 ‘Ecotoxic chronic’ is the most discriminating HP. All wastes classified as acute ecotoxic are also chronic ecotoxic and the assessment of acute ecotoxicity separately is therefore not needed. The high number of HP 14 classified wastes is due to the very low limit values when stringent M factors are applied to total concentrations (worst case method). With M factor set to 1 the classification method is not sufficiently discriminating between hazardous and non-hazardous materials. The second most frequent hazard is HP 7 ‘Carcinogenic’. The third most frequent hazard is HP 10 ‘Toxic for reproduction’ and the fourth most frequent hazard is HP 4 “Irritant – skin irritation and eye damage”. In a stepwise approach, it seems relevant to assess HP 14 first, then, if the waste is not classified as hazardous, to assess subsequently HP 7, HP 10 and HP 4, and then if still not classified as hazardous, to assess the remaining properties.The elements triggering the HP 14 classification in order of importance are Zn, Cu, Pb, Cr, Cd and Hg. Progress in the speciation of Zn and Cu is essential for HP 14. Organics were quantified by the proposed method (AFNOR XP X30-489) and need no speciation. Organics can contribute significantly to intrinsic toxicity in many waste materials, but they are only of minor importance for the assessment of HP 14 as the metal concentrations are the main HP 14 classifiers. Organic compounds are however responsible for other toxicological characteristics (hormone disturbance, genotoxicity, reprotoxicity…) and shall be taken into account when the waste is not HP 14 classified.     

Deletion 15q24-26 in prenatally detected diaphragmatic hernia: increasing evidence of a candidate region for diaphragmatic development

Survival of children with congenital diaphragmatic hernia (CDH) is mainly dependent on the extent of lung hypoplasia and the presence of additional congenital anomalies or chromosomal aberrations. A chromosomal deletion 15q25-q26.2 in a fetus with prenatally diagnosed CDH and growth retardation is reported. Despite optimal pre- and neonatal management the baby died shortly after birth. There is increasing evidence that the long arm of chromosome 15, and especially the region 15q24 to 15q26, plays a crucial role in the development of the diaphragm. The finding of a deletion within 15q24-26 in a fetus with CDH has to be considered a predictor of poor prognosis. It is of utmost interest for proper parental counselling to search in fetuses with CDH for subtle chromosomal lesions paying special attention to chromosome 15q. Copyright © 2001 John Wiley & Sons, Ltd.     

Photocatalytic degradation of paraquat using nano-sized Cu-TiO2/SBA-15 under UV and visible light

Photocatalytic degradation of paraquat using mesoporous-assembled Cu-TiO₂/SBA15 under UV and visible light was investigated. The catalyst was synthesized by impregnation of Cu-TiO₂ colloids onto SBA-15. The colloids of Cu-TiO₂ were prepared via sol-gel method while the mesoporous support was prepared using hydrothermal technique. The catalyst was characterized using X-ray diffraction, nitrogen adsorption-desorption, transmission electron microscopy, UV diffuse reflectance spectroscopy, Zeta potential and X-ray adsorption spectroscopy. Results from characterizations showed that Cu doped TiO₂ had a small crystalline size and was well-dispersed on SBA-15. The inclusion of SBA-15 significantly enhanced the photocatalytic activity of the catalyst. Among the three types of undoped catalyst in this study (P25, TiO₂, TiO₂/SBA-15), TiO₂/SBA-15 yielded the highest degradation of paraquat for all pH under UV illumination. Meanwhile 2 wt.% Cu-TiO₂/SBA-15 yielded the highest activity under visible light.     

Natural resource dependence and the accumulation of physical and human capital in Latin America

In a simultaneous model of human and physical capital accumulation for 17 Latin American countries from 1975 to 2004, we show that overall resource dependence has no significant direct effect on physical and human capital. When disaggregating the natural resource variable into sub-categories, we find that petroleum export dependence has a significant positive direct effect on physical capital, but a significant negative direct effect on human capital. Agricultural export dependence shows a significant negative direct effect on physical capital. Petroleum exports have a long run positive effect on physical capital but a negative long run effect on human capital. Agricultural exports have a negative long run effect on physical and human capital.     

Linking permit markets multilaterally

We formally study the determinants, magnitude and distribution of efficiency gains generated in multilateral linkages between permit markets. We provide two novel decomposition results for these gains, characterize individual preferences over linking groups and show that our results are largely unaltered with strategic domestic emissions cap selection or when banking and borrowing are allowed. Using the Paris Agreement pledges and power sector emissions data of five countries which all use or considered using both emissions trading and linking, we quantify the efficiency gains. We find that the computed gains can be sizable and are split roughly equally between effort and risk sharing.     

C8-SBA-15新型介孔涂层SPME-HPLC联用测定水样中的芘

以辛基键合SBA- 15为固相微萃取(SPME)的吸附涂层,考察了吸附和解吸时间、萃取温度、搅拌速率对SPME效率的影响.该方法的线性范围为3.0-320μg/L,检出限为0.5μg/L,依据此方法测定了环境水样中芘,具有灵敏度高和精密度好的特点.     

Zr掺杂对SBA-15上负载胺分散性及CO2吸附特性的影响

针对胺改性复合吸附剂稳定性差、负载胺分散性欠佳的问题,对介孔SBA-15进行原位Zr掺杂改性,考察了载体材料表面酸性对胺分散状态及其CO2吸附性能的影响。研究表明：载体表面酸性的增强可改善聚合胺在其孔道结构中的空间分散构型,使其暴露出更多的活性位点,由此低PEI负载量下复合吸附剂（30PEI/ZrSBA-15）对CO2的吸附容量均在99 mg·g-1以上,超过50PEI/SBA-15在优选温度75℃下的吸附容量89.8 mg·g-1;且表面酸性位与端位氨基间的结合也增进了复合吸附剂的热稳定性与循环稳定性,3次循环测试后样品的CO2吸附容量没有下降。     

土壤反硝化田间原位测定方法的研究进展

土壤中的反硝化作用由于直接影响到肥料氮的利用率和环境问题,仍然是氮素研究领域的热点和难点之一,而反硝化作用研究的进展在很大程度上依赖与土壤反硝化的田间测定方法的建立。文章就目前反硝化研究领域常用的15N平衡差值法、15N示踪气体通量法、乙炔抑制气室法、乙炔抑制土柱法的原理、气体样的采集、测定和计算作了综述,以期为土壤反硝化的研究提供依据。     

Analysis of Products Generated from the Thermal and Catalytic Degradation of Pure and Waste Polyolefins using Py-GC/MS

The possibility of transforming waste plastics into valuable hydrocarbons via catalytic cracking and reforming is attracting increasing interest. Pyrolysis coupled with Gas Chromatographic separation and Mass Spectrometry detection (Py-GC/MS) has been used in this work to study the product selectivity of various catalysts in the conversion of pure and residual polyethylene samples into hydrocarbon products. Five acid solids of comparable aluminium contents but different textural and acid properties were tested as catalysts, including three zeolites (standard ZSM-5, nanocrystalline n-ZSM-5 and Beta) and two mesostructured solids (Al-MCM-41 and Al-SBA-15). Thermal cracking of the pure and residual polymers generated a similar range of products to each other, with a high proportion of linear paraffins and olefins of varying lengths. The presence of zeolitic materials resulted in complete elimination of heavy linear products, an increase in the light hydrocarbon fraction and a marked selectivity towards the formation of single-ring aromatic species, particularly benzene, toluene and xylene. Aromatic formation was particularly notable with the small crystal size n-ZSM-5 (aromatic selectivity up to 53.9%) and less marked in the case of standard ZSM-5 (up to 36.4%) and Beta zeolite (up to 35.0%). Mesostructured catalysts like Al-MCM-41 and Al-SBA-15 favoured the production of light C₂–C₅ hydrocarbons (up to 57.9%) while the formation of aromatic products was significantly lower than with zeolitic materials. The paper examines the extent and the causes for this product selectivity and discusses its connection with the acid and textural properties of each catalyst. It was also observed that, under the experimental conditions employed, the products generated were not significantly affected by the nature and origin of the polymers employed.