X射线防护服所需铅当量的研究与应用

铅当量是X射线防护服最重要的性能指标,铅当量的大小决定着X射线防护服屏蔽X射线的能力。X射线防护服的铅当量有不同的等级,需根据不同的X射线照射条件和工作情况选择使用。本文通过计算给出了几种常用管电压下防护服屏蔽散漏X射线所需的铅当量值,可为X射线防护服的使用单位或个人在购买和使用时提供参考。选择适合铅当量的X射线防护服,可以避免因选用的防护服或用具铅当量不足而达不到有效屏蔽X射线的效果,造成健康的危害;也可以避免因选用过大铅当量的X射线防护服或用具,致使作业人员过多负重,导致疲劳,发生人为失误,也可以避免造成不必要的经济浪费。另外,为了保证X射线防护服的使用效果,本文给出了X射线防护服的检验、贮存和使用等管理方法。     

袋式除尘器和静电除尘器在电厂除尘系统中运用的性能对比分析

针对目前火电厂除尘系统应用现状和当前环保要求,通过对袋式除尘器和静电除尘器在火电厂燃煤锅炉除尘系统中的应用,对袋式除尘器和静电除尘器在技术性能上的差异作了简单的对比分析,以指导除尘器在目前火电厂燃煤锅炉除尘系统中的具体应用。     

雷管自动装配线上袋式除尘器的设计和研究

以军民两用雷管主要填充物黑索金为研究对象,详细论述了小型低压脉冲袋式除尘器在雷管自动装配线上的应用,及该结构中几个关键点的设计。     

Dissolution behavior of metals from particulate matter emissions

Exposure to air particulate matter (PM) is linked to numerous health effects. In order to improve the understanding of the role of its metallic components, their solubility was examined by using serial short-contact dissolutions totalling 1?h and additional sequential contact periods of 1, 4, and 8 days. The dissolution experiments were performed in solutions containing the main biological electrolytes. ICPMS determinations were used to quantify the dissolved metals. The total compositions were determined after closed vessel microwave digestion. Large variations in the rate and completeness of the dissolutions were observed. Fast and extensive dissolutions within the short-contact time (e.g., Zn, Cd) as well as slow dissolutions persisting during the last contact period (e.g., Ni, Cu, Sb, Pb) were found for smelting emissions. The multi-element determinations also made it possible to identify relationships between dissolution of different metals and define gradual composition changes of residual PM. When comparing with dissolutions performed in de-ionized water, similar major fractions were observed at short-contact time for minor components of smelting or combustion emissions (e.g., V, Ni, Cd), suggesting a preponderance of easily available forms at the surface of the relatively inert particle cores. The use of these time sequential methods may help in (1) modeling metal partitioning in biological media and (2) investigating the causes of adverse effects attributed to air PM.     

纳米金颗粒进入梨形四膜虫体内的方式及其分布

以梨形四膜虫为模式动物,研究水体中的纳米金颗粒进入生物体的方式、分布及其生物学效应.实验中所采用的纳米金颗粒平均粒径为13 nm,分散均匀.透射电镜结果表明,纳米金颗粒可以通过口沟（进食）和细胞膜（内吞）两种方式进入梨形四膜虫体内;纳米金颗粒进入梨形四膜虫体内后,主要分布在食物泡中,另外细胞质和细胞核（大核）中也含有少量的纳米金颗粒.同时,研究表明在实验所用的浓度范围内,纳米金颗粒对梨形四膜虫无明显毒性.     

三层滤料高速过滤应用于再生水生产的研究

试验在传统混凝—沉淀—三层滤料过滤工艺的基础上,通过对滤料级配的改进,将三层滤料高速过滤工艺应用于再生水的生产,对其可行性进行分析研究。结果表明:在最佳工艺条件下出水浊度的去除率可达97.5%～98.5%,COD去除率在43%左右。同时研究发现,在高速过滤条件下,通过絮凝剂在滤床中发挥的微絮凝作用,可以起到良好的除污效果且出水水质稳定。     

突发事件应急预案的评估研究

对突发事件应急预案进行有效地评估,是提高应急预案实效性,保证预案能够发挥其理想效果的关键环节。目前国内应急预案的评估多为模板式评估研究,评估的依据和内容有待完善,文章探究对照法在应急预案评估中的应用,以提升应急准备能力为目的,重点对预案的充分性、可行性、完整性、可接受性、符合性这5方面进行评估,提出预案修订建议,并以真实应急预案为例具体描述评估过程。     

Dissolution of zinc oxide nanoparticles in exposure media of algae,daphnia, and fish embryos for nanotoxicological testing

Zinc oxide nanoparticles (ZnO NPs) are being widely investigated in a bioassay due to potential negative effects to biological receptor. The dissolution of metal nanoparticles such as ZnO NPs is crucial to interpret nanotoxicity results because ZnO NPs can release toxic-free ions in exposure media. In the present study, dissolution of ZnO NPs was evaluated in three selected synthetic media for aquatic toxicological testing: Elendt M4 daphnia medium, OECD algal medium, and fish embryo rearing solution. Both media are currently recommended for OECD testing for daphnia and algae. Time-dependent dissolution of ZnO NPs has been investigated in terms of sonication time to be used for the preparation of aqueous NPs suspension, and dissolution time corresponding to exposure period in toxicity testing. Since sonication is widely applied for NPs dispersion in the most of nanotoxicological testing, the emphasis of this study was on the dissolution of NPs as a function of sonication time. We also investigated the concentration-dependent dissolution of ZnO NPs. Our results demonstrated that dissolution of ZnO NPs was significantly affected by sonication and dissolution time, as well as NPs concentration. This study showed that parameters affecting dissolution of ZnO NPs should be considered in nanotoxicological testing.