Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Remediation of s-triazines contaminated water in a laboratory scale apparatus using zero-valent iron powder

Atrazine, propazine and simazine were tested separately and in mixture by batch procedure in a laboratory-constructed apparatus. 3.75 l of a buffered s-triazines pesticide solution was treated at room temperature by 325-mesh zero-valent iron powder (ZVIP) (20 g/l). High performance liquid chromatography was used to separate by-products and study the decline in the pesticide’s concentrations. Results obtained show that the order of degradation was simazine, atrazine and then propazine. The half-lives (t_1/2) of the s-triazines pesticides are, respectively, 7.4, 9.0 and 10.6 min when they are treated separately, and 9.8, 11.2 and 13.7 min when they are treated together under the same conditions. The final by-product obtained after 50 min of contact of simazine with ZVIP shows a shift to longer wavelength in its UV spectrum. A similar phenomenon is shown for atrazine and propazine. Identical primary by-products are produced and subsequently degraded to 4,6-(diamino)-s-triazine, which seems to be the major by-product of the reductive treatment process. Pathways for the degradation of the studied s-triazines by ZVIP are proposed.     

What do economic simulations tell us? Recent mergers in the iron ore industry

This paper investigates the European Commission's decision to allow a merger between two Brazilian iron ore mining companies, CVRD and Caemi, using data on the Direct Reduced Iron pellet market. By using a simulation model, we can directly simulate the total welfare effects from the merger and hence evaluate the merger from a new perspective. The results from our simulations suggest that the welfare effects are negative from the merger between CVRD and Caemi, which supports the conclusion drawn by the European Commission decision. By performing different simulations between hypothetical merger candidates, our results show that only mergers between small candidates have the potential to be welfare enhancing.     

硝基苯类废水的预处理技术研究

Fe(OH)2对硝基苯具有强烈的还原作用，短时间内可把硝基苯还原为苯胺。催化铁屑法处理硝基苯类废水，除了包括铁屑法处理废水的各种反应外，还能使硝基苯在其表面直接还原，且反应在弱碱性条件下效果较好。m(Fe)：m(Cu)为10：1，pH为9．5，废水硝基苯进水质量浓度为250mg／L，反应时间为30min，硝基苯的去除率达100％。     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

昆钢制氢站二次净化系统的优化改进

针对昆钢动力能源分公司制氢站建成投产后出现的环保污染和所带来的生产运行问题,对制氢系统原装置技术存在问题进行分析,提出优化改进方案,并对实施后的效果、环境效益、经济效益等进行分析。优化方案的实施彻底解决了制氢站建成后产生的环保污染问题。     

我国钢铁行业环境现状分析与对策研究

钢铁工业是我国国民经济的重要基础产业和实现新兴工业化的支柱产业,同时存在能源消耗和环境污染的一系列问题。通过对钢铁行业的能源消耗和环境保护的现状及特点进行总结,归纳了该行业突出存在的环境问题,提出相应的环境保护对策,并指导钢铁行业未来的发展;提出了提高生产装备水平、控制污染物排放总量和严格环评准入等方面的建议。     

浅谈地下水净化厂除铁除锰试验及应用

通过对齐齐哈尔市自来水公司铁锋水厂除铁、锰工艺的分析,得出曝气接触氧化除铁、锰是一种好方法.     

锰砂表面改性去除酚类化合物的研究

本文叙述了锰砂表面改性(以下简称旧锰砂)处理含酚饮用水的实验研究,陈酚率可达99％。本实验对除酚因素(温度、pH值、流速和接触时间等)进行了实验研究。当进水酚浓度≤2.0mg/l时,经旧锰砂的吸附,可使酚浓度≤0.002mg/l。     

煤飞灰中铬铁元素的形态分析研究

用连续提取法将煤飞灰中的铬、铁元素依结合态区分为水溶态,交换态,表面氧化物和碳酸结合态,铁锰氧化物结合态,金属有机物和硫化物结合态,磁性四氧化三铁结合态和硅铝酸盐矿物态,用原子吸收法及X-衍射分析进行测定。并对煤飞灰化学形态分布进行了讨论。