Propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation

The coupled fluid-structure-rupture model was developed to study the propagation and intensity of blast wave from hydrogen pipe rupture due to internal detonation. The dynamic rupture of pipe and propagation of blast wave were well coupled together in every timestep during the simulation. The numerical model was validated with experiments in terms of both typical rupture profiles and blast overpressures. Results reveal that crack branching of pipe can dramatically increase the rupture opening rate which controls the intensity and shape of the resultant blast wave. Due to the process of crack initiation and extension, the blast wave out of the pipe first forms and then is strengthened by the subsequent compression waves. This makes the maximum peak overpressure appears at a certain standoff distance above the rupture. Despite consuming some percentages of energy, the dynamic rupture of pipe generally presents positive effects (up to 2–3 times) on the blast wave intensity along the jetting direction due to the convergence effect of rupture opening on the release of internal high-pressure gas. Finally, through defining normalized overpressure and impulse based on the same hydrogen detonation in open spaces, the quantitative influences of pipe rupture on the blast wave intensity in cases of different detonation pressures and standoff distances are clarified.     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

某型号伺服排油管动力学特性研究

目的 通过对某型号伺服排油管动力学特性研究,为管路设计方案的确定提供依据。方法 对三种设计方案的伺服排油管进行振动试验,测量其关键位置的应变响应,并结合有限元计算进行结果分析。结果 该伺服排油管的谐振频率在180 Hz附近,当振动环境在180 Hz附近有峰值时,会发生耦合共振,管路应变很大。结论 管路设计时谐振频率应避开环境的危险频率,无法避开时需要对管路进行加强。     

海水淡化水在既有管网输配的铁释放控制研究

由于具有强腐蚀性,海水淡化水在既有市政管网输配过程中往往会产生严重的"红水"现象,主要是由于管网中铁的释放.为了研究控制既有管网中铁释放的有效措施,对管龄为30～40 a的钢管和灰口铸铁管内壁的腐蚀瘤进行分析,主要组成物质为Fe3O4和FeOOH;选择腐蚀较严重的钢管进行静态浸泡试验,重点分析了自来水和淡化水的掺混比、pH值、碱度、氯离子和硫酸根离子对铁释放的影响,并以铁浓度为控制量,初步给出了海水淡化水在既有管网中安全输配所需满足的水质条件:自来水和淡化水的掺混比≥2∶1,pH值在7.6以上,碱度>200 mg.L-1.     

长庆油田4731B型非金属集输管道老化特性实验研究

为推广非金属复合管在油田集输油领域的应用,明确其在集输环境中的老化特性是关键问题。基于集输油现场的工程条件,针对长庆油田试用的4731B型钢丝缠绕增强复合管,以采出原油、采出水为实验介质,通过挂片实验、水压爆破实验,借助电镜扫描、拉伸测试对复合管内衬层老化行为、拉伸性能以及复合管极限承压与老化特性进行研究。结果表明:采出原油与采出水均可渗透扩散进入内衬层内部,还会发生局部深入渗透;采出原油、采出水的局部渗透速率分别可达3.4,10.6 mm/a;在某些工况下,内衬层表面产生裂纹;短时间（168 h）内的介质渗透甚至裂纹对其机械性能影响较小,而光氧老化影响显著;现场服役813 d后,复合管极限承压下降2.79%,表明复合管承压性能稳定。     

管道结构对氢/空预混气体爆炸特性影响研究

为研究管道结构对氢-空预混气体爆炸特性影响,采用实验与数值模拟相结合的方法,分析不同管道结构内氢-空预混气体燃爆时火焰传播进程、爆炸压力、湍流动能变化及流场分布.结果表明:90°弯管对氢-空预混气体爆炸强度增强作用明显高于T型分岔管和直管.火焰阵面在结构突变处褶皱变形较明显,并出现大尺度强湍流和涡团,气团脉动速度与湍流...     

摆管淋水试验装置的校准方法探讨

文中简述了摆管淋水试验装置的基本结构及其常见的校准方式,对其中的“摆角校准”这一技术难点提出了可行的解决方案并作了较详尽的说明分析。     

基于光纤分布式测温的污水管道入流识别方法研究

针对排水管网物探检测需断水操作和无法对管道内部实时探查的问题,建立了一种基于光纤分布式测温的污水管道入流诊断方法,实现了无干扰条件下污水管道污水和雨水入流实时监控.采用感温光缆对选择的试验管段开展了时空高精度观测(空间精度1m、时间精度1min),获得了超过118万个管道水温数据.基于解析出的管道水温时空图像,提出了基于水温温差背景噪声值的入流定位方法;确定出无外部入流影响时管道水温空间和时间温差的背景噪声值分别约为±0.2℃和±0.5℃.采用水温图像降噪处理方法,自动识别出污水管道的旱天污水接入和雨天雨水接入事件,与现场调查结果一致.因此,该方法对污水管道入流的动态识别定位具有可靠性.     

三棱钻杆粉体负载扭矩计算模型研究

为了实现三棱钻杆转动过程的定量化计算,在分析了三棱钻杆排粉机理的基础上,提出了基本假设,建立了扭矩基本物理模型,并阐述了物理模型的求解过程,得到了基本参数的解析解。在此基础上,对相关参数的求取方法以及最小扭矩问题进行了分析讨论,求得了钻孔内煤粉密度ρ的解析解以及降低钻杆整体扭矩的方法,提出了实际应用环节测定临界转速w界的实验方法,并得到了提高钻孔长度的理论方法。     

双金属复合管线应力分析中当量折算模型的建立与应用*

针对目前高腐蚀性气田的集输系统管线应力分析标准中,未给出双金属复合管线的强度校核方法,依据当量折算理论,将双金属复合管的几何与材料特性转化为等效单层管,通过有限元法验证双层管与等效管模型的计算精度。研究结果表明:利用当量折算理论,可以快速将双金属管外径、壁厚、弹性模量、热膨胀系数、密度等参数等效转化为单层管道相关参数。经实际应用检验,该方法在解决工程问题时具备一定的实用性与准确性;双金属复合管系统当量折算模型具备计算方便和精度高等优点,该模型可用于双金属复合管线结构设计和强度校核。研究结果可为双金属复合管线的强度校核提供1种参考方法。