nZVI对亚硝化颗粒污泥性能的冲击性影响研究

本研究采用批次试验,考察了不同浓度纳米零价铁(n ZVI)对亚硝化颗粒污泥(NGS)性能的冲击性影响,并对氮形态转化规律、氨氧化菌比耗氧速率(SOUR-A)、胞外聚合物(EPS)与溶解性微生物产物(SMP)组成、铁元素分布情况进行了系统分析.结果表明,当n ZVI投加量从0mg·L~(-1)提高至10 mg·L~(-1)时,SOUR-A值显著提高,NGS对氨氮的去除率始终保持在95%以上,亚硝态氮比累积速率(μ(NO-2-N))由27.3mg·g~(-1)·h-1提高至30.7 mg·g~(-1)·h-1,EPS中多糖与蛋白质含量均明显上升.然而,当原水中n ZVI浓度高于25 mg·L~(-1)时,SOUR-A值大幅降低,EPS与SMP中的多糖组分出现此消彼长的现象.当n ZVI投加量达到700 mg·L~(-1)时,NGS对氨氮的去除率降至58.9%,μ(NO-2-N)值为17.5 mg·g~(-1)·h-1,仅相当于对照组的64.1%.此外,扫描电镜与能谱分析的结果表明,n ZVI在NGS表面的大量吸附不仅严重抑制了功能微生物的活性,也会显著改变污泥表面的微生态环境.     

Information source and valence: How information credibility influences earthquake risk perception

The present research aims at the relationship between information credibility and perception of seismic risk in a group of people living in severe disaster areas. 243 adult residents exposed to seismic hazard participated in a questionnaire study. With respect to four types of information which are generated by information sources and valence, participants were instructed to recall one type of the information they obtained respectively and rate the recalled information in terms of its credibility. After that, they were asked to report their seismic risk perception and all socio-demographic data were also collected. Regression analyses suggested that information credibility significantly influenced risk perception. Furthermore, the credibility of word-of-mouth and negative information were positively associated with risk perception. Meanwhile, risk perception was also affected greatly by the credibility of negative public information but not positive word-of-mouth information. It was clear that both information source and valence moderated the process and the latter exerted a stronger influence on it. The results were interpreted in relation to the elaboration likelihood model, accessibility-diagnosticity model, and other cognitive theories. The findings were discussed in terms of their general implications for the improvement of risk communication about earthquake related messages.     

Kinetics of nitrobenzene degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by emulsified vegetable oil

Widespread contamination by nitrobenzene(NB) in sediments and groundwater requires better understanding of the biogeochemical removal process of the pollutant. NB degradation, coupled with dissimilatory iron reduction, is one of the most efficient pollutant removal methods. However, research on NB degradation coupled to indigenous microorganism dissimilatory iron reduction stimulated by electron donors is still experimental. A model for remediation in an actual polluted site does not currently exist.Therefore, in this study, the dynamics was derived from the Michaelis–Menten model(when the mass ratio of emulsified vegetable oil and NB reached the critical value 91:1). The effect of SO_4~(2-), NO_3~-, Ca~(2+)/Mg~(2+), and the grain size of aquifer media on the dynamics were studied, and the NB degradation dynamic model was then modified based on the most significant factors. Utilizing the model, the remediation time could be calculated in a contaminated site.     

Removal of Cs from water and soil by ammonium-pillared montmorillonite/Fe3O4 composite

To remove cesium ions from water and soil, a novel adsorbent was synthesized by following a one-step co-precipitation method and using non-toxic raw materials. By combining ammonium-pillared montmorillonite (MMT) and magnetic nanoparticles (Fe₃O₄), an MMT/Fe₃O₄ composite was prepared and characterized. The adsorbent exhibited high selectivity of Cs⁺ and could be rapidly separated from the mixed solution under an external magnetic field. Above all, the adsorbent had high removal efficiency in cesium-contaminated samples (water and soil) and also showed good recycling performance, indicating that the MMT/Fe₃O₄ composite could be widely applied to the remediation of cesium-contaminated environments. It was observed that the pH, solid/liquid ratio and initial concentration affected adsorption capacity. In the presence of coexisting ions, the adsorption capacity decreased in the order of Ca^2 + > Mg^2 + > K⁺ > Na⁺, which is consistent with our theoretical prediction. The adsorption behavior of this new adsorbent could be expressed by the pseudo-second-order model and Freundlich isotherm. In addition, the adsorption mechanism of Cs⁺ was NH₄⁺ ion exchange and surface hydroxyl group coordination, with the former being more predominant.     

Mobilization of arsenic from contaminated sediment by anionic and nonionic surfactants

The increasing manufacture of surfactants and their wide application in industry,agriculture and household detergents have resulted in large amounts of surfactant residuals being discharged into water and distributed into sediment. Surfactants have the potential to enhance arsenic mobility, leading to risks to the environment and even human beings. In this study, batch and column experiments were conducted to investigate arsenic mobilization from contaminated sediment by the commercial anionic surfactants sodium dodecylbenzenesulfonate(SDBS), sodium dodecyl sulfate(SDS), sodium laureth sulfate(AES)and nonionic surfactants phenyl-polyethylene glycol(Triton X-100) and polyethylene glycol sorbitan monooleate(Tween-80). The ability of surfactants to mobilize arsenic followed the order AES SDBS SDS ≈ Triton X-100 Tween 80. Arsenic mobilization by AES and Triton X-100 increased greatly with the increase of surfactant concentration and p H, while arsenic release by SDBS, SDS and Tween-80 slightly increased. The divalent ion Ca~(2+) caused greater reduction of arsenic mobilization than Na~+. Sequential extraction experiments showed that the main fraction of arsenic mobilized was the specifically adsorbed fraction. Solid phase extraction showed that arsenate(As(V)) was the main species mobilized by surfactants,accounting for 65.05%–77.68% of the total mobilized arsenic. The mobilization of arsenic was positively correlated with the mobilization of iron species. The main fraction of mobilized arsenic was the dissolved fraction, accounting for 70% of total mobilized arsenic.     

The risks of sulfur addition on cadmium accumulation in paddy rice under different water-management conditions

Recently, the application of sulfur (S) has been recommended to control the accumulation of cadmium (Cd) in rice in contaminated paddy soil. However, the effects of exogenous S on Cd transfer in paddy rice systems under different water-management practices have not been systematically investigated. Pot experiments were performed to monitor the composition of soil pore water and the Cd accumulation in iron plaque and rice tissue were compared under different S (0 and 200 mg/kg Na₂SO₄) and water (continuous and discontinuous flooding) treatments. Sulfur application significantly increased Cd concentrations in soil pore water under discontinuous flooding conditions, but slightly reduced them under continuous flooding. Moreover, the oxidation/reduction potential (Eh) was the most critical factor that affected the Cd levels. When the Eh exceeded −42.5 mV, S became the second critical factor, and excessive S application promoted Cd dissolution. In addition, S addition elevated the Cd levels in iron plaque and reduced the Cd transfer from the iron plaque to rice roots. In rice, S addition inhibited Cd transfer from the rice roots to the straw; thus, more Cd was stored in the rice roots. Nevertheless, additional S application increased the Cd content in the rice grains by 72% under discontinuous flooding, although this effect was mitigated by continued flooding. Under simulated practical water management conditions, S addition increased the risk of Cd contamination in rice, suggesting that S application should be reconsidered as a paddy fertilization strategy.     

Review on corrosion and corrosion scale formation upon unlined cast iron pipes in drinking water distribution systems

The qualified finished water from water treatment plants (WTPs) may become discolored and deteriorated during transportation in drinking water distribution systems (DWDSs), which affected tap water quality seriously. This water stability problem often occurs due to pipe corrosion and the destabilization of corrosion scales. This paper provides a comprehensive review of pipe corrosion in DWDSs, including corrosion process, corrosion scale formation, influencing factors and monitoring technologies utilized in DWDSs. In terms of corrosion process, corrosion occurrence, development mechanisms, currently applied assays, and indices used to determine the corrosion possibility are summarized, as well as the chemical and bacterial influences. In terms of scale formation, explanations for the nature of corrosion and scale formation mechanisms are discussed and its typical multilayered structure is illustrated. Furthermore, the influences of water quality and microbial activity on scale transformation are comprehensively discussed. Corrosion-related bacteria at the genus level and their associated corrosion mechanism are also summarized. This review helps deepen the current understanding of pipe corrosion and scale formation in DWDSs, providing guidance for water supply utilities to ensure effective measures to maintain water quality stability and guarantee drinking water safety.     

Solid fuels in chemical-looping combustion

The feasibility of using a number of different solid fuels in chemical-looping combustion (CLC) has been investigated. A laboratory fluidized bed reactor system for solid fuel, simulating a chemical-looping combustion system by exposing the sample to alternating reducing and oxidizing conditions, was used. In each reducing phase 0.2 g of fuel in the size range 180–250 μm was added to the reactor containing 40 g oxygen carrier of size 125–180 μm. Two different oxygen carriers were tested, a synthetic particle of 60% active material of Fe₂O₃ and 40% MgAl₂O₄ and a particle consisting of the natural mineral ilmenite. Effect of steam content in the fluidizing gas of the reactor was investigated as well as effect of temperature. A number of experiments were also made to investigate the rate of conversion of the different fuels in a CLC system. A high dependency on steam content in the fluidizing gas as well as temperature was shown. The fraction of volatiles in the fuel was also found to be important. Furthermore the presence of an oxygen carrier was shown to enhance the conversion rate of the intermediate gasification reaction. At 950 °C and with 50% steam the time needed to achieve 95% conversion of fuel particles with a diameter of 0.125–0.18 mm ranged between 4 and 15 min depending on the fuel, while 80% conversion was reached within 2–10 min. In almost all cases the synthetic Fe₂O₃ particle with 40% MgAl₂O₄ and the mineral ilmenite showed similar results with the different fuels.     

氧化亚铁硫杆菌浸出线路板中铜及过程中铁的变化研究

从煤堆积水中分离得到氧化亚铁硫杆菌,利用该菌种对线路板中的Cu进行了浸出实验.研究了不同线路板粉末添加量对浸出效果的影响,在220 mL溶液中添加量为2.2、4.4 g时Cu的浸出率很快达到了90%,而添加量为11.0、22.0 g时浸出率表现了缓慢上升,在15 d左右达到了90%.观察了浸出过程中铁浓度及价态的变化,结果表明,浸出初期随着添加量的增加,Fe2 增加明显,但是随着浸出时间的推移,Fe3 、Fe2 和总Fe都呈现降低趋势.     

铁水包底粘铁所引发的一起重伤事故分析

介绍了一起铁水包底粘铁所引发的事故经过,进行了事故原因分析,指出了事故教训和预防措施。