模糊综合评价法在道路运输企业安全评价中的应用

我国道路运输企业交通安全形势比较严峻,推行道路运输企业安全综合评价是降低道路运输企业交通事故的有效途径之一.本文运用Delphi法和AHP法建立了道路运输企业安全层次分析模型,构建了安全综合评价指标体系.选用基于"差动"原理的赋权法--G1法计算各指标的权重,应用模糊综合评价法对其进行安全综合评价.采用平均加权法对评价因素的各项指标进行量化处理,从而得到道路运输企业安全的综合评价结果.最后,对陕西省一家道路运输企业进行了实际验证,比较真实地反映了此企业的安全状况.     

基于计算模拟与响应面分析漆酶对己烯雌酚的降解作用

己烯雌酚(Diethylstilbestrol,DES)作为水环境中最具雌激素活性的合成化合物之一,其给生物体和环境带来的危害已经引起人们的关注.本研究首先通过分子对接与分子动力学模拟从理论上分析漆酶与DES的相互作用;其次通过实验分析其降解动力学模型及不同反应条件和介质对漆酶催化转化DES的影响;最后使用响应面分析方法优化漆酶-ABTS系统催化转化DES的最佳条件.计算结果表明,漆酶与DES的反应能够自发进行且它们之间主要存在氢键和疏水作用力.实验结果表明,反应6 h左右,50 mg·L^-1的DES的降解率达到93%以上;根据Michaelis-Menten模型得到的动力学参数K_m和V_max分别为36.18 mg·L^-1和45.98 mg·L^-1·h^-1,模型的R²为0.99.漆酶催化降解DES的最佳pH为6,最佳温度为55℃.几种介质中,ABTS对漆酶催化降解DES的作用最强.通过响应面分析发现,在pH=5.5、55.98℃、1....     

生物法处理含油钻井废水的影响因素研究

以含油钻井废水原浆为处理对象,研究了生物法处理过程中的相关影响因素.实验结果表明,氮、磷源是影响钻井废水中石油烃降解的重要因素,最佳氮、磷源及其加入量分别为(NH4)2SO4100 mg/L和KH2PO460 mg/L.在30～36℃,接种量15%,pH=6～8条件下处理72 h后可使钻井废水中的石油烃含量由805.6 mg/L下降到17.6 mg/L.     

发泡注浆法合成莫来石轻质耐火材料

以工业废弃物粉煤灰和当地粘土为主要原料,十二烷基苯磺酸钠为发泡剂,采用发泡注浆法制备轻质莫来石耐火材料,研究了烧结温度对耐火材料晶相的影响以及发泡剂的种类、添加量和浆料固含量对轻质耐火材料常温物理性能的影响。结果表明,适当的烧结温度可改善耐火材料的晶相,同时对制品的孔隙率也有一定影响。选择适宜的发泡剂及添加量,在一定的浆料固含量范围内,可以制备容重小,孔隙率高,导热系数小,机械强度适中的轻质耐火材料。     

华北地区冬半年空气污染天气客观分型研究

利用2013—2016年冬半年ERA-interim再分析资料,以及同期空气污染资料、地面常规气象观测资料和探空资料,采用PCT (Principal Component Analysis in T-mode)客观分型方法对华北地区冬半年海平面气压场进行天气分型,并探究不同月份不同天气型对应的空气污染状况及污染气象参数分布特征,进而从污染气象学的角度揭示重污染潜势天气型的气候特征.结果表明:冬半年海平面气压场共对应9种天气类型,其中,5型(均压场型)、6型(高压内部型)和8型(高压后部型)为3种重污染潜势天气型,冬半年对应的PM_(2.5)均值浓度分别为144.11、136.99和148.26μg·m~(-3),而1型(T型高压前部型)和3型(低压底部型)为两种清洁天气型,冬半年对应的PM_(2.5)均值浓度分别为97.12和80.83μg·m~(-3);重污染潜势天气型对应的边界层结构呈现出稳定能量大、混合层厚度和通风系数小的大气层结稳定的静稳天气特征,其能够反映大气污染潜势;研究还发现,即使是同一天气型,其在不同月份对污染物的扩散影响也存在差异,因此,建议在今后的污染潜势天气型研究中分月份进行.本研究可为华北地区空气污染潜势预报及大气重污染预报预警的客观化、自动化提供科学依据和技术支持.     

车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。     

智能手机应用程序使用与操作的驾驶分心风险影响研究

为研究智能手机应用程序操作方式与使用行为对驾驶分心影响的问题,探讨智能手机程序操作方式对驾驶分心影响的优劣关系,基于结构方程模型提出4个因果关系假设,构建涵盖程序使用、驾驶分心、驾驶绩效等潜变量的智能手机使用行为影响的结构方程模型。通过收集线下问卷的方式进行调查,搭建模拟场景,设计6项实验方案,通过驾驶模拟实验方式收集相关数据,建立相对偏差矩阵。研究结果表明：手机通话功能的使用(路径系数0.472)对驾驶分心影响显著,手机导航功能使用(路径系数0.256)、手机音乐功能使用(路径系数0.249)对驾驶分心影响不显著。语音交互方式均优于手动操作方式,其中语音交互启动导航方式(F₃=0.019)的影响最小。研究结果可对道路驾驶情况下智能手机应用使用与操作方式的研究起推动作用。     

Structural equation model of the influence of noise annoyance on miners’ unsafe behavior in coal mines

Miners' unsafe behavior (UB) is the main cause of coal mine accidents. Previous research has suggested that excessive noise in tunnels impacts miners' temperaments and safe production behavior. To explore the influence of noise on UB, four different dimensions of noise annoyance were identified: cognitive, emotional, communication, and physical mechanism annoyance. The coal mine noise annoyance scale, miners' unsafe behavior intention (UBI) scale, and miners’ UB scale were developed according to different dimensions. In the first survey, a total of 200 questionnaires were distributed in the two coal mines, and 193 valid questionnaires were recovered. Exploratory factor analysis was conducted, and invalid items were removed according to the analysis results to form the final scale. Then, 500 final scales were distributed in two Chinese coal mines, and 482 valid questionnaires were collected. Confirmatory factor analysis was conducted by collating the data of the second questionnaire. Based upon the structural equation model (SEM), the SEM of the influence of noise annoyance degree on UB and the path analysis with latent variable path analysis with the latent variables (PA-LVs) mediating model of the effect of UBI on UB were established, and the path coefficients with fitting data of the model were analyzed. The results indicated that the four dimensions of coal mine noise annoyance had a strong positive impact on UB, which was reduced by less noise annoyance. In addition, the Bootstrap method was used to verify the mediating method among the four dimensions of noise annoyance, cognitive annoyance, emotional annoyance, with communication annoyance indirectly affecting UB through UBI. The research results provide theoretical support for reducing the UB of miners and improving coal mine safety levels.     

The TNO multi-energy method combined to mathematical programming and computational fluid dynamics for optimisation of gas detectors

Gas leakage is a matter of concern for several industries such as oil and gas, mining, food, and healthcare. When the industry considers gas detectors, the main questions are: How many gas detectors are required? Where is the best location to install them? To answer these questions Computational Fluid Dynamics (CFD) simulations and optimisation procedures are employed to calculate the plume location and plume volume to better position the gas detectors. We investigated how the optimisation cell size for the set covering problem can be calculated based on a given explosion overpressure threshold. Resorted by the multi-energy explosion model, we calculate the flammable cloud volume associated with a pre-defined overpressure value. The cloud volume is applied in the solution of the set covering problem and an optimal set for the gas detectors is obtained. The final gas detector network (number and location of the devices) is validated against CFD simulations for small releases. The results provide evidence that the optimal gas detector networks is able to detect gas leaks within a feasible time.     

Effect of particle size on CO adsorption and thermodynamic analysis

The liquid nitrogen adsorption method was used to characterize the pore structure of non-cohesive coal in the 061,404 working face of the Lingxin coal mine. The amount of specific surface area of micropores in the sample continuously rose as particle sizes reduced. The volumetric method was used to measure the CO isothermal adsorption curves of three samples (sample I, 0.425–0.25 mm, sample II, 0.18–0.25 mm, and sample III, 0.15–0.18 mm). The experimental results were fitted by the Langmuir model. According to the experimental results, it was conducive to CO adsorption with the conditions of high pressure and low-temperature. The decrease in grain diameter increased the number and volume of micropores in the sample, which improved the adsorption capacity of the sample. In addition, according to the adsorption data, the CO adsorption thermodynamics of three samples were analyzed, including surface potential (Ω), Gibbs free energy change (ΔG) and entropy change (ΔS). The results demonstrated that CO adsorption by coal was a spontaneous process. Sample III has the most substantial adsorption capacity, whereas the sample I has the weakest adsorption capacity.