国内外钢渣处理技术与综合利用技术的发展分析

介绍了国外钢渣综合利用概况,分析了我国钢渣处理技术与国外之间的差距.对存在的问题提出了建议.     

小溪港浮游植物群落特征及水质评价

2012—2013年于春、夏、秋、冬四季对小溪港进行4次水环境质量调查,利用种类组成、种群数量、优势种、Shannon-Weiner多样性指数和SI(污生指数)等指标分析小溪港浮游植物群落特征,并对小溪港水环境质量状况进行评价. 结果表明:小溪港浮游植物共8门51种,其中绿藻门的种类数最多,共26种,占总种数的50.98%;其次为硅藻门,共9种,占17.65%;蓝藻门5种,占9.80%. 浮游植物数量年均值为184.16×104 L-1,主要为蓝藻门、绿藻门和硅藻门;峰值出现在夏季,为292.43×104 L-1,之后为春、秋和冬季. 小溪港的优势种共4门7种,分别为蓝藻门的微囊藻(Microcystis spp.),绿藻门的星芒衣藻(Chlamydomonas stellata)、丝藻(Planctonema sp.)、小球藻(Chlorella vulgaris),硅藻门的小环藻(Cyclotella spp.),隐藻门的啮蚀隐藻(Cryptomonas erosa)、尖尾蓝隐藻(Chroomonas acuta). Shannon-Weiner多样性指数、Margalef丰富度指数和Pielou均匀度指数均显示出明显的季节变化规律,其年均值分别为1.81、1.55、0.51;SI年均值为2.44. 总体上,小溪港水质污染状况为中污染.      

结合在线监测和自动识别系统分析东海沿岸船舶排放特征

海运排放大气污染物对空气质量和气候具有重要影响,但是由于船舶类型及其运行工况的复杂性,人们对船舶排放特征的认识仍然不足.东海沿岸是全球航运活动最为密集的地区之一,汇集了各种国内国际运输船只.选取宁波舟山港作为研究地点,使用在线仪器长时间测量主要的环境大气气体和颗粒污染物,并利用自动识别系统（AIS）,获得每种船舶的速度.根据后向轨迹区分出：1受船舶排放影响主导的时期（夏季风,由处于完全运行或停泊的船舶占主导地位）;2受内陆气流影响主导的时期（冬季风）.结果表明二氧化硫（SO₂）、氮氧化物（NO_x）和黑碳气溶胶（BC）的排放与高速运行的船舶相关,而一氧化碳（CO）可能与较低的运行速度的船舶有关,总颗粒物（PM）与船舶速度没有显著相关关系.主要污染物在巡航工况下的排放增强因子约为怠速工况1~4倍.研究通过对直接环境背景下船舶排放进行原位观测,为评估船舶排放清单提供重要参考.     

The potential for improvements in energy efficiency and CO2 emissions in the EU27 cement industry and the relationship with the capital budgeting decision criteria

This paper performs a cost-effectiveness analysis of some of the best available technologies (BAT) that can contribute to decreasing the energy consumption and CO₂ emissions in the European Union’s (EU27) cement industry. Several capital budgeting decision criteria have been used (the payback period, the net present value and the internal rate of return) to study whether or not an investment should be considered worthwhile. The results show that, independent of the capital budgeting decision criteria used, the number of cost-effective retrofitting possibilities available is large compared to the rate of improvements that the industry undertakes annually. This shows the insensitivity of the industry to financial criteria when it comes to making their investment decisions. The possible thermal energy improvement in the clinker production, if all these BATs were implemented, has been quantified to be around 10%. This achievement would place the cement industry in the upper bound of the benchmark range for clinker manufacture. However considering the delays observed nowadays in terms of diffusion of BATs in the cement industry, it requires a conducive policy environment that combines support for both technology development and to their deployment.     

深冲钢板塑性变形形为研究

单相塑性材料的强度和塑性基本上是分别研究讨论的。此文以低碳深冲钢板为例,从能量观点出发,讨论了强度和塑性的内在制约关系,唯象地提出了单相塑性材料塑性破坏的判据,并解释了几个实验现象。此文的研究有助于加深对深冲钢塑性变形形为的理解。     

Potential of secondary aerosol formation from Chinese gasoline engine exhaust

Light-duty gasoline vehicles have drawn public attention in China due to their significant primary emissions of particulate matter and volatile organic compounds(VOCs). However,little information on secondary aerosol formation from exhaust for Chinese vehicles and fuel conditions is available. In this study, chamber experiments were conducted to quantify the potential of secondary aerosol formation from the exhaust of a port fuel injection gasoline engine. The engine and fuel used are common in the Chinese market, and the fuel satisfies the China V gasoline fuel standard. Substantial secondary aerosol formation was observed during a 4–5 hr simulation, which was estimated to represent more than 10 days of equivalent atmospheric photo-oxidation in Beijing. As a consequence, the extreme case secondary organic aerosol(SOA) production was 426 ± 85 mg/kg-fuel, with high levels of precursors and OH exposure. The low hygroscopicity of the aerosols formed inside the chamber suggests that SOA was the dominant chemical composition. Fourteen percent of SOA measured in the chamber experiments could be explained through the oxidation of speciated single-ring aromatics. Unspeciated precursors, such as intermediate-volatility organic compounds and semi-volatile organic compounds, might be significant for SOA formation from gasoline VOCs. We concluded that reductions of emissions of aerosol precursor gases from vehicles are essential to mediate pollution in China.     

基于DPSIR模型的生态港口指标体系研究

生态港口指标体系的建立是生态港口从理论研究阶段进入可操作的实际应用阶段的重要步骤,建立生态港口指标体系的实质就是确定生态港口的具体建设内容和考核标准体系.在生态港口内涵的分析基础上,提出了建立生态港口指标体系的基本框架、原则和方法,并根据"驱动力-压力-状态-影响-响应"模型框架,以天津生态港口建设为背景,建立了天津生态港口建设与评价指标体系.     

Atmospheric bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the vicinity of an iron and steel making plant

An IRA-743 resin bulk sampler was validated to monitor long-term bulk deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). Six consecutive sampling campaigns (2008-2009) were conducted at four sites around steel complexes in Pohang, South Korea to investigate spatial and seasonal variations of PCDD/F bulk deposition. The bulk deposition within the steel complex showed the highest ∑_4-8PCDD/F (Tetra-Octa) fluxes, ranging from 204 to 608 (mean: 352) pg m⁻² d⁻¹, indicating steel complexes were major sources of PCDD/Fs. The homologue profiles were dominated with lower chlorinated PCDFs. Furthermore, the prevailing winds were confirmed to influence the spatial distribution of PCDD/F deposition. There were apparent seasonal variations of the bulk deposition at each site, and seasonal homologue patterns of PCDD/Fs were clearly observed. According to the passive air sampling, however, no significant seasonal change of ambient air concentrations of PCDD/Fs was observed. Therefore, it was concluded that the seasonal variations of deposition fluxes of PCDD/Fs probably resulted from temperature-dependent gas/particle partitioning.     

中国钢铁工业职业卫生40年回顾和今后展望

通过对中国钢铁工业职业卫生四十年的回顾,笔者认为:钢铁工业卫生管理体制已基本形成,但管理水平急需提高;主要的传统职业危害有所抑制,而今后任务仍十分艰巨;随着钢铁工业生产技术的发展广大职工又面临新的职业危害的挑战。本文最后对90年代钢铁工业职业卫生的形势进行了展望,提出了新的对策。在执行「八五」职业卫生规划的基础上,还需加强职业互生服务机构,扩大服务覆盖面,提高专业素质、开展普及教育、加强专业队伍的自身建设,这些任务是实现十年战略目标的重要保证。     

连云港港口渔船防污工作的调查与思考

通过对连云港港口渔船防污工作的现场调查，分析了存在的问题，对渔船的污染危害进行了评估，并提出了对策。