军用电子产品环境试验顺序问题浅议

本文从一个具体的试验案例缘起,有针对性的分析、讨论了某军用电子产品质量问题的出现、与实际解决办法,更重要的是本文不仅是为了解决某一产品问题,而是从质量问题的出现,进而思考到环境试验顺序对产品潜在故障的影响,起码从宏观上说明了环境试验顺序对电子产品潜在故障的析出是有影响的.     

铝合金及其氧化膜大气腐蚀行为与机理研究进展

综述了铝合金及其阳极氧化膜的大气腐蚀行为和特点。重点阐述了铝合金及阳极氧化膜大气腐蚀过程,大气腐蚀形态即点蚀、晶间腐蚀和剥蚀的特点,我国大气腐蚀规律,大气腐蚀的影响因素、研究方法以及最新进展,并展望了铝合金大气腐蚀的研究趋势。     

先进增强结构仿真分析与实验研究

目的 研究先进增强结构受载条件下的应力分布特点.方法 开展先进增强结构有限元仿真分析,模拟先进增强结构在单轴载荷作用下的应力应变特点,同时开展先进增强结构力学试验.试验以0.02 mm/s的速度匀速加载至20 kN,采用应变检测方法获取先进增强结构复合材料结构和金属基体结构的应力应变大小,对比分析有限元和试验结果.结果...     

Red light: A novel,non-pharmacological intervention to promote alertness in shift workers

Introduction: Night work requires inversion of the natural, diurnal human activity-rest cycle and is associated with decreased alertness and some measures of performance, reduced safety, adverse health effects, and chronic disruption of the melatonin cycle that has been associated with increased risk for several major diseases. Previous studies show that red light exposures at night can promote alertness and improve performance while not negatively affecting melatonin secretion. Method: This ongoing crossover, mixed (within- and between-subjects) design field study is testing the efficacy and acceptance of red light delivered to day-shift and night-shift workers using personal light glasses while they are at work. Each participant experienced three lighting interventions at the eyes: red light (50 lx, 630 nm, the treatment intervention), blue light (50 lx, 460 nm, the positive control intervention), and dim white light (10 lx, 3,000 K, the placebo control). During the interventions, participants underwent visual performance testing, submitted salivary melatonin and cortisol samples, and provided subjective reports of sleepiness, sleep disturbance, and general health over the 20-week protocol. Due to the ongoing nature of the study, only the performance and subjective reports are presented here. Results: Preliminary results indicate that response times were improved by the red and blue interventions, but not accuracy and hit rates. Blue light was associated with improvements to self-reported sleep disturbances compared to dim light. Conclusions: These field results partially support our laboratory results that showed a positive effect of red light for promoting alertness and certain performance outcomes during the day and at night. Practical Applications: Red light may be used to improve response times in shift workers. Continued research will elucidate the lighting interventions’ effects on melatonin and objective sleep measures (actigraphy).     

便携式布氏硬度计在电厂金属硬度检测中的应用

针对电厂金属部件及焊缝现场硬度检测中里氏硬度计误差较大的问题,介绍了有关标准的进展情况,以及便携式布氏硬度计和压痕自动测量装置的最新技术.结果表明:在现场硬度检测中,对有争议的硬度值宜采用便携式布氏硬度计进行测量校核,国内已形成关于便携式布氏硬度计的标准体系,自动压痕测量装置配合便携式布氏硬度计非常适于电厂的现场硬度检测,通过换算得到的数据,不能作为投诉和满足验收要求的依据.     

社会环境检测机构质量监管措施研讨

就目前的情况而言,我国在社会环境检测机构质量不容乐观。因此,我们应该根据实际情况,来设置相应的社会环境检测监管方案。我们可以通过严格规范社会环境检测机构市场准入门槛、创设专门的社会环境检测机构质量监管部门、创设社会环境检测机构网上投诉平台等方式,来提升监管力度,让社会环境检测机构正确发挥其应有的作用。     

符合NEBS认证要求的高低温自动测试系统设计

针对NEBS认证标准的要求,本文提出了一种符合该标准要求的高低温自动测试系统设计方案,该方案能有效改善测试点控温精度和温度波动度,减少人工干预,防止设备故障。     

电驱动道路车辆动力锂离子电池组和电池系统性能试验条件和要求

本文是电驱动道路车辆动力锂离子电池的试验和要求标题下的电池组和电池系统性能试验部分。结合国标转化过程和实验室能力验证经历,在能量、容量、功率、内阻、能效和损耗等性能试验方法和要求作了具体的描述和解释。供实验室和相关产品的供需方双参考。     

铝合金/高强度钢连接件西沙暴露试验

选取某飞机铝合金/高强度钢连接件开展西沙暴露试验,掌握连接件腐蚀变化趋势。结果表明,连接件保护涂层耐老化性能良好,采用湿装配有效避免了电偶腐蚀和缝隙腐蚀,连接件背面螺栓、螺母和铆钉（30CrMnSiA,表面镀镉）为其腐蚀薄弱环节,需加强防护。     

Changes in serum concentrations of polychlorinated biphenyls (PCBs), hydroxylated PCB metabolites and pentachlorophenol during pregnancy

We studied pregnancy-related changes in serum concentrations of five polychlorinated biphenyls (PCBs, CB 118, CB 138, CB 153, CB 156, CB 180), three hydroxylated PCB metabolites (4-OH-CB107, 4-OH-CB146, 4-OH-CB187), and pentachlorophenol (PCP). Median serum lipid content increased 2-fold between early (weeks 9-13) and late pregnancy (weeks 35-36) (N = 10), whereas median PCB levels in serum lipids decreased 20-46%, suggesting a dilution of PCB concentrations in serum lipids. Nevertheless, strong positive intra-individual correlations (Spearman’s r = 0.61-0.99) were seen for PCBs during the whole study period. Thus, if samples have been collected within the same relative narrow time window during pregnancy, PCB results from one single sampling occasion can be used in assessment of relative differences in body burdens during the whole pregnancy period. Concentrations of OH-PCBs in blood serum tended to decline as pregnancy progressed, although among some women the concentrations increased at the end of pregnancy. Positive intra-individual correlations (r = 0.66-0.99) between OH-PCB concentrations were observed during the first and second trimester, whereas correlations with third trimester concentrations were more diverging (r = −0.70-0.85). No decline in PCP concentrations was observed during pregnancy and no significant correlations were found between concentrations at different sampling periods. Our results suggest that for both OH-PCBs and PCP, sampling has to be more specifically timed depending on the time period during pregnancy that is of interest. The differences in patterns of intra- and inter-individual variability of the studied compounds may be due to a combination of factors, including lipid solubility, persistence of the compounds, distribution in blood, metabolic formation, and pregnancy-related changes in body composition and physiological processes.