高地下水位地区透水停车场的水文控制效果

为确定高地下水位地区透水铺装对路面径流的水文控制效果,在上海市区建造了4个实验性透水铺装单元与1个不透水铺装对照,其中3个为设有防水衬底的不透型设施分别为透水混凝土铺装(设施Ⅰ)、水泥稳定碎石基层/缝隙透水砖面层(设施Ⅱ)、碎石基层/缝隙透水砖面层(设施Ⅲ),1个普通缝隙透水砖铺装(设施Ⅳ),以及1个不透水混凝土对照(设施0).历时1年监测了实际降雨条件下4种实验设施的表面径流、排水管出流流量及表面渗透速率,考察不同设施的径流总量削减率、峰值削减及峰现延迟能力.结果表明,缝隙透水砖面层的表面稳定渗透速率明显小于透水混凝土面层,使用1年后,2种面层表面稳定渗透速率均明显下降;4种设施的表面产流均无显著差异;3种不透型设施的就地消纳水量能力均较弱,年径流总量控制率分别为24.2%、28.5%、28.4%,排水管不发生出流的控制降雨量分别为5.2 mm、7.8 mm、7.8 mm;设施Ⅰ的峰值削减与峰现延迟效果弱于设施Ⅱ及设施Ⅲ,且3种设施的峰值削减率和峰现延迟时间与降雨强度呈现显著负相关性.     

Assessment of the clear-sky bias issue using continuous PM10 data from two AERONET sites in Korea

A bias in clear-sky conditions that will be involved in estimating particulate matter(PM)concentration from aerosol optical depth(AOD) was examined using PM_(10) from two Aerosol Robotic Network sites in Korea. The study periods were between 2004 and 2007 at Anmyon and between 2003 and 2011 at Gosan, when both PM_(10) and AOD were available. Mean PM_(10) when AOD was available(PM AOD) was higher than that from all PM_(10)data(PM all) by 5.1 and9.9 μg/m~3 at Anmyon and Gosan, which accounted for 11% and 26% of PM all, respectively.Because of a difference between mean PM_(10) under daytime clear-sky conditions(PM clear)and PM AOD, the variations in ΔPM_(10), the difference of PM all from PM clear rather than from PM AOD, were investigated. Although monthly variations in ΔPM_(10)at the two sites were different, they were positively correlated to those in ΔT, similarly defined as ΔPM_(10)except for temperature, at both sites. ΔPM_(10)at Anmyon decreased to a negative value in January due to an influence of the Siberian continental high-pressure system while ΔPM_(10)at Gosan was high in winter due to an effect of photochemical production at higher temperatures than at Anmyon.     

港口罢工对周边空气质量的影响

港口污染物的排放浓度极大地影响着周边的空气质量,以2013年3月28日香港国际集装箱码头发生的罢工事件为契机来探究港口运作短暂的瘫痪对周边空气质量的影响。首先,进行污染物之间的相关性分析确定影响本次罢工事件的污染物主要为NO_2、NO_x、SO_2以及O_3。其次,基于罢工前、罢工期间以及罢工后污染物排放的浓度变化,进行横向对比发现罢工期间的污染物确实有一定程度的减少。再次,利用纵向对比排除四季带来的影响探究不同年份同一阶段污染物浓度的变化情况评估罢工期间的空气质量。最后,以NO_2为例建立预测模型对罢工期间的NO_2浓度进行预测,根据实际值与预测值之间的差异来说明罢工影响了NO_2的预测趋势。这项研究主要强调港口空气质量对整个环境的影响,在一定程度上说明政府实施政策的有效性,为政府提供了决策支持,同时也要注重污染物之间的相互转化作用对环境的影响。     

两段式进水两级矿化垃圾反应器处理中晚期垃圾渗滤液

针对矿化垃圾反应器处理中晚期垃圾渗滤液时由于反硝化区缺少碳源而导致总氮去除率不佳的问题,开展以优先利用原水中的有机物充当碳源为目的的两段式进水两级矿化垃圾反应器处理工艺的研究。通过控制反应器的曝气量、好氧区和反硝化区,研究了两段式进水两级矿化垃圾反应器处理垃圾渗滤液的效果。结果表明,当进水渗滤液水力负荷为46.0 L/(m~3·d)时,在第一级反应器底部曝气量为1.86 m~3/(m~3·d),第二级反应器中上部曝气量为0.37 m~3/(m~3·d)的条件下,COD、NH_4~+-N、TP的平均去除率分别为84.1%、92.6%、85.6%,运行稳定后TN平均去除率达76.0%,处理效果较好。     

餐厨垃圾厌氧消化运行试验研究

采用猪粪厌氧消化的消化污泥为接种物,在中温(37℃)条件下,以连续进料的方式对餐厨垃圾的湿式厌氧消化进行了启动以及运行试验,监测整个实验过程中产气量、pH、VFA、碱度等能够反映厌氧消化的系统指标。结果表明:本实验中系统最佳有机负荷为2.8 kg/(m~3·d)(以VS计),超过此负荷后,依靠系统自身恢复和人工调节,pH很难恢复正常运行状态。正常运行过程中,pH稳定在7.5~8.0,VFA稳定在2 000 mg/L左右,碱度在6 000~9 000 mg/L,氨氮在1 500~2 000 mg/L,底物含水率为96%~98%。系统超负荷运行后,产气量和pH下降,VFA浓度上升,碱度、氨氮、含水率基本保持稳定。     

原始红松林退化演替后土壤微生物功能多样性的变化

为了全面了解原始红松林退化演替为次生林后土壤生境及土壤微生物功能多样性的变化规律,以小兴安岭典型的原始阔叶红松林、退化演替后先锋阶段的白桦林及亚顶级阶段的硬阔叶林为研究对象,采用Biolog-ECO微平板检测法,分析三者0~ < 10 cm和10~20 cm表层土的土壤微生物功能多样性变化规律.结果表明:各林型土壤微生物的AWCD值（平均颜色变化率）随培养时间的延长而增加,培养初期表现为原始阔叶红松林>硬阔叶林>白桦林;培养末期表现为原始阔叶红松林>白桦林>硬阔叶林,三者的AWCD值在0~ < 10 cm土层分别为1.06、0.86、0.81,10~20 cm土层分别为0.68、0.47、0.45,原始林显著高于次生林（P < 0.05）,说明原始林土壤微生物对单一碳源的代谢活性显著高于次生林;同一林型下土壤微生物的AWCD值均表现为0~ < 10 cm土层显著高于10~20 cm土层（P < 0.05）. Shannon-Wiener多样性指数、Simpson指数、McIntosh指数和Richness丰富度指数也均表现为原始林显著高于次生林（P < 0.05）.原始林土壤微生物对各类碳源的综合利用强度均大于次生林,不同林型下土壤微生物群落的优势碳源类型存在一定的差异,碳水类、氨基酸类、羧酸类和多聚物类碳源是原始林退化演替后土壤微生物群落在碳源利用上发生变化的敏感碳源.      

In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

Pd-MnO2 nanoparticles/TiO2 nanotube arrays (NTAs) photo-electrodes photo-catalytic properties and their ability of degrading Rhodamine B under visible light

Pd-MnO_2/TiO_2 nanotube arrays(NTAs) photo-electrodes were successfully fabricated via anodization and electro deposition subsequently; the obtained Pd-MnO_2/TiO_2 NTAs photo electrodes were analyzed by scanning electron microscopy(SEM), X-ray diffraction(XRD) and characterized accordingly. Moreover, the light harvesting and absorption properties were investigated via ultraviolet–visible diffuse reflectance spectrum(DRS); photo degradation efficiency was investigated via analyzing the photo catalytic degradation of Rhodamine B under visible illumination(xenon light). The performed analyses illustrated that Pd-MnO_2 codoped particles were successfully deposited onto the surface of the TiO_2 nanotube arrays;DRS results showed significant improvement in visible light absorption which was between400 and 700 nm. Finally, the photo catalytic degradation efficiency results of the designated organic pollutant(Rhodamine B) illustrated a superior photocatalytic(PC) efficiency of approximately 95% compared to the bare TiO_2 NTAs, which only exhibited a photo catalytic degradation efficiency of approximately 61%, thus it indicated the significant enhancement of the light absorption properties of fabricated photo electrodes and their yield of UOH radicals.     

流体剪切与超声空化破解剩余污泥的参数优化

为提高剩余污泥的破解效果并降低能耗,采用FS（fluid shear,流体剪切）、UC（ultrasonic cavitation,超声空化）、FS和UC联合工艺（FS-UC,UC-FS）破解剩余污泥,并应用单因素试验结合响应面法对联合工艺进行优化.结果表明:FS对剩余污泥破解效果一般,只在开始阶段具有较好效果,随作用时间延长,破解效果未有显著提高甚至下降.UC对剩余污泥破解效果明显,随作用时间延长,破解效果显著提升,但能耗也随之增大,EDR（energy disintegration ratio,效能比）明显下降.相同作用时间下,UC破解效果优于FS破解效果,UC破解剩余污泥的DD_COD（degree of disintegration,破解率）与EDR均明显高于FS方法.单因素试验得出的较优FS作用时间范围为2~8 min,较优UC作用时间范围为5~15 min.响应面法试验结果显示,联合工艺的剩余污泥破解效果和能量利用率均优于单一方法,联合工艺中FS-UC工艺的破解效果优于UC-FS工艺.FS-UC工艺的最佳参数:FS处理5.6 min再UC处理15.0 min,该条件下剩余污泥实际DD_COD为50.8%,EDR为26.8%.UC-FS工艺的最佳参数:先UC作用15.0 min再FS作用7.8 min,该条件下剩余污泥实际DD_COD为36.5%,EDR为17.1%.研究显示,以DD_COD和EDR为指标,4种工艺的高效性顺序为FS-UC > UC-FS > UC > FS,其中FS-UC工艺具有能耗低、破解效率高的特点,是4种工艺中剩余污泥破解效果最好的一种工艺.      

三种流速下高强钢与微弧氧化钛电偶腐蚀研究

目的研究三种流速下微弧氧化钛和高强钢的电偶腐蚀行为。方法在面积比为1:1情况下进行1,3,7 m/s流速下的电化学测试和电偶腐蚀试验研究。结果随着流速的增大,偶合电流、总腐蚀速率和电偶腐蚀速率增大。当流速为7 m/s时,高强钢总腐蚀速率和电偶腐蚀速率分别达到8.64 mm/a和0.39 mm/a,与静态相比分别增大146倍和15.6倍,与1 m/s流速下相比分别增大8.6倍和5倍。结论在面积比为1:1时,冲刷腐蚀速率远大于电偶腐蚀速率。