中俄联合监测水质中总磷测定实验的方法与结果对比分析

近年来,中俄双方开展了对等联合监测,但由于国域差别,两个国家在一个项目上采取了不同的实验方法,常出现同一个样品中俄双方出现不同的实验结果,为避免分歧,我国在少数几个站进行了中俄双方实验方法的对比实验,现就水质中总磷的测定将两国的实验方法和实验结果进行了分析。     

生态规划在资源型城市转型实践中的作用——以抚顺市为例

目前我国一些资源型城市由于长期开采,资源已近枯竭,即将陷入可持续发展危机,如何实现资源型城市转型成为我国城市发展中十分重要的课题。为了研究生态规划对于资源型城市转型的推动作用,本文以典型资源型城市抚顺市为例,通过分析其城市生态规划的内容及近年的规划举措,得出了城市生态规划是推进城市转型的有效途径这一结论,并分析了该结论的广泛意义。     

重点产业源增长对北部湾地区气态污染物模拟的影响

根据污染源普查资料制作北部湾地区2007年人为排放源清单,以及中期/远期参比情景(REF15/REF20)和远期调控情景(SCEi20)下的排放源清单.采用WRF-Chem模拟北部湾地区空气质量现状及未来变化.2007年SO2和NO2月平均质量浓度模拟值与监测值比较吻合.广东、广西(海南)地区污染物质量浓度较高(低)....     

中国地区经济差距及其演化的产业变动因素

20世纪90年代以来中国地区经济差距扩大具有深刻的产业变动原因。以人均GDP为基本指标,通过对基尼系数进行产业分解和对泰尔指数进行地区分解,深刻分析了1990~2004年中国地区经济差距的动态变化、地区构成和产业构成,揭示了中国地区经济差距及其演变的产业结构变动与产业地区集中因素。结果表明,1990年以来中国地区经济差距的决定性因素是第二产业发展水平的地区差距,而非农产业向东部沿海地区的集中又是推动中国地区经济差距扩大的主导性因素。20世纪90年代以来,随着以制造业为主的非农产业向东部沿海地区集中,中西部地区逐渐沦落为以农业与采掘业为主的外围区域,中国的地区经济差距也由此持续扩大。基于此,认为缩小地区差距的关键是推进中西部地区制造业发展,缓解非农产业地区分布的不平衡状况。     

火焰原子吸收法测定水中的总铬

用火焰原子吸收光谱法测定水中总铬,乙炔流量100L/h、燃烧头高度为9mm、狭缝宽度0.2 nm时,灵敏度和重现性最好.1 mg/L铬溶液中盐酸含量5％、氯化铵含量0.5％时,吸光度较高,相对标准偏差最低.该方法操作简便,灵敏度好,精确度和准确度高,便于推广,适合水中总铬的测定.     

汞分析仪直接测定土壤中总汞的方法研究

建立了利用RP91C-RA915M汞分析仪直接测定土壤中总汞的方法。该方法直接固体进样,省去了常规方法加酸消解、赶酸、定容等繁琐的前处理步骤;利用标准土壤绘制工作曲线,无需反复稀释标准储备液配制标准溶液,测定了方法检出限、精密度及准确度。结果表明此方法准确、可靠,是一个比较理想的分析方法。本方法的检出限为0.25μg/kg,相对标准偏差为1.98%~4.92%,标准样品测定准确,加标回收率为92.8%~106%。     

黑龙江省平水期地表水总磷构成的研究

通过对黑龙江省平水期地表水总磷监测结果分析,探讨地表水总磷的构成、成因;提出了从源头治理地表水总磷污染建议。     

Seasonal variation in dissolved gaseous mercury and total mercury concentrations in Juam Reservoir, Korea

Dissolved gaseous mercury (DGM) and total mercury (TM) concentrations were measured in Juam Reservoir, Korea. DGM concentrations were higher in spring (64+/-13pgL(-1)) and summer (109+/-15pgL(-1)), and lower in fall (20+/-2pgL(-1)) and winter (23+/-6pgL(-1)). In contrast, TM concentrations were higher in fall (3.2+/-0.1ngL(-1)) and winter (3.3+/-0.1ngL(-1)) than in spring (2.3+/-0.1ngL(-1)) and summer (2.2+/-0.4ngL(-1)). DGM concentrations were correlated with water temperature (p<0.0001), ORP (p<0.0001), UV intensity (UV-A: p=0.008; UV-B: p=0.003), and DOC concentration (p=0.0107). DGM concentrations varied diurnally with UV intensity. The average summer DGM (109+/-15pgL(-1)) and TM (2.2+/-0.4ngL(-1)) concentrations in Juam Reservoir were higher than the averages for North American lakes (DGM=38+/-16pgL(-1); TM=1.0+/-1.2ngL(-1)), but lower than levels reported for Baihua Reservoir in China.     

Phosphorus Load Reduction Goals for Feitsui Reservoir Watershed, Taiwan

The present paper describes an effort for developing the total maximum daily load (TMDL) for phosphorus and a load reduction strategy for the Feitsui Reservoir in Northern Taiwan. BASINS model was employed to estimate watershed pollutant loads from nonpoint sources (NPS) in the Feitsui Reservoir watershed. The BASINS model was calibrated using field data collected during a 2-year sampling period and then used to compute watershed pollutant loadings into the Feitsui Reservoir. The simulated results indicate that the average annual total phosphorus (TP) loading into the reservoir is 18,910 kg/year, which consists of non-point source loading of 16,003 kg/year, and point source loading of 2,907 kg/year. The Vollenweider mass balance model was used next to determine the degree of eutrophication under current pollutant loading and the load reduction needed to keep the reservoir from being eutrophic. It was estimated that Feitsui Reservoir can becoming of the oligotrophic state if the average annual TP loading is reduced by 37% or more. The results provide the basis on which an integrated control action plan for both point and nonpoint sources of pollution in the watershed can be developed.     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.