国内外总量管理制度发展历程对南京市的启示

本文介绍了国内外总量管理制度的发展历程,特别是"十三五"以来我国总量管理工作新的规定,并由此产生的针对南京市主要污染物总量管理工作的几点启示。     

地表水环境遥感监测关键技术与系统

本文主要是围绕地表水环境遥感检测展开讨论,全面介绍了水环境检测的关键技术和系统,建立改进双峰法的水体分布遥感提取方法,并以具体地区为例进行分析,采用不同方法建立解析方法,从根本上提升反演方法的区域和积极适用性,希望能够对相关人员起到参考性价值。     

基于大数据技术构建生态环境信息化体系及其重点应用研究

本文首先分析了生态环境信息化体系的主要构成要素,其后基于大数据技术的生态环境信息化体系重点领域应用进行了深入研究。     

维修时间不确定性下配电网灾后维修队安排的鲁棒恢复研究*

为最小化灾后配电网损失量,准确描述完整维修队工作时间（分为路途时间与具体维修时间）,依据台风路径对维修队所需路途时间进行分类,并利用期望概率描述具体维修时间的不确定性。建立2阶段分布式鲁棒优化模型,采用CCG算法分析国内某地区配电网算例发现:考虑维修时间不确定性可以有效减少配电网损失量。     

中国省际间农村居民收入结构和收入差距分析

在计算基尼系数的基础上,文章得出了改革开放以来中国省际间农村居民收入差距不断扩大的趋势,收入基尼系数从1981年的0.095一直上升到了2003年的0.181,直到近年来,收入差距才开始略有缩小。文章从收入结构的视角研究了省际间农村居民收入差距产生的原因。首先利用1983-2008年较长时期的数据分析了农村居民收入结构的变化,发现从总体上而言,中国各地区农村居民的收入结构均表现出了农业收入比重减少,非农收入比重增加的明显趋势;然后运用基尼系数的分解方法实证分析了不同收入来源对于收入差距的影响,研究发现,工资性收入是差距促增的,是目前中国省际间农村居民收入差距扩大最重要的原因,而家庭经营性收入者起着差距促减的作用,转移性收入和财产性收入的不平等程度较高,但是由于其在总收入中的比例不高,对总的收入差距影响较小。最后,文章提出了缩小省际间农村居民收入差距的政策建议。     

Integrated biological responses of zebrafish (Danio rerio) to analyze water quality in regions under anthropogenic influence

This study analyzed water quality in regions around Patos lagoon (Southern Brazil) that are under anthropogenic pressure. Water samples were collected from five different sites, including one used as a source for human consumption (COR) and others known to be influenced by human activities (IP). Danio rerio (Teleostei, Cyprinidae) organisms were exposed for 24 h to these water samples, plus a control group. It was observed that: (1) reactive oxygen species levels were lower in COR and IP than in the control group; (2) glutamate-cysteine ligase (catalytic subunit) expression was higher in COR than in other sites; (3) exposure to all water samples affected long-term memory (LTM) when compared to control group. Thus, some water samples possess the ability to modulate the antioxidant system and to induce a decline in cognitive functions, as measured by LTM. The obtained results indicate that a combination of variables of different organization level (molecular, biochemical and behavioral) can be employed to analyze water quality in impacted regions.     

Making cities resilient to climate change: identifying “win–win” interventions

Urbanisation is truly a global phenomenon. Starting at 39% in 1980, the urbanisation level rose to 52% in 2011. Ongoing rapid urbanisation has led to increase in urban greenhouse gas (GHG) emissions. Urban climate change risks have also increased with increase in climate-induced extreme weather events and more low-income urban dwellers living in climate sensitive locations. Despite increased emissions, including GHGs and heightened climate change vulnerability, climate mitigation and adaptation actions are rare in the cities of developing countries. Cities are overwhelmed with worsening congestion, air pollution, crime, waste management, and unemployment problems. Lack of resources and capacity constraints are other factors that discourage cities from embarking on climate change mitigation and adaptation pathways. Given the multitude of problems faced, there is simply no appetite for stand-alone urban climate change mitigation and adaptation policies and programmes. Urban mitigation and adaptation goals will have to be achieved as co-benefits of interventions targeted at solving pressing urban problems and challenges. The paper identifies administratively simple urban interventions that can help cities solve some of their pressing service delivery and urban environmental problems, while simultaneously mitigating rising urban GHG emissions and vulnerability to climate change.     

Lorenz Curve and Gini Coefficient: Novel tools for analysing seasonal variation of environmental radon gas

Using a methodology derived from Economics, the Lorenz Curve and Gini Coefficient are introduced as tools for investigating and quantifying seasonal variability in environmental radon gas concentration. While the Lorenz Curve presents a graphical view of the cumulative exposure during the course of the time-frame of interest, typically one year, the Gini Coefficient distils this data still further, to provide a single-parameter measure of temporal clustering. Using the assumption that domestic indoor radon concentrations show annual cyclic behaviour, generally higher in the winter months than in summer, published data on seasonal variability of domestic radon concentration levels, in various areas of the UK, Europe, Asia and North America, are analysed. The results demonstrate significantly different annual variation profiles between domestic radon concentrations in different countries and between regions within a country, highlighting the need for caution in ascribing seasonal correction factors to extended geographical areas. The underlying geography, geology and meteorology of a region have defining influences on the seasonal variability of domestic radon concentration, and some examples of potential associations between the Gini Coefficient and regional geological and geographical characteristics are proposed. Similar differences in annual variation profiles are found for soil-gas radon measured as a function of depth at a common site, and among the activity levels of certain radon progeny species, specifically ²¹⁴Bi deposited preferentially in human body-fat by decay of inhaled radon gas. Conclusions on the association between these observed measures of variation and potential underlying defining parameters are presented.     

江苏省沿江开发区空间分工、制造业集聚与转移

基于新经济地理学相关理论,针对江苏省沿江开发战略实施以后,制造业空间可能存在的变动,在整理和分析调查问卷资料的基础上,选择专业化指数和基尼系数2种方法来定量分析江苏省21个沿江省级以上开发区空间分工、制造业集聚和转移态势。结果表明：（1）2002~2006年江南沿江开发区通过向江北沿江开发区转移部分传统产业,逐渐形成了江南沿江技术/资本密集型制造业“中心”和江北沿江劳动密集型制造业“外围”的空间分工格局;（2）江南沿江开发区内部、江北沿江开发区内部尚未形成良好的分工关系;（3）受开发区发展阶段、区域产业政策、本地化资源供给和市场需求等因素影响,并未发现理论预期的普遍存在的产业集聚现象,仅纺织服装、石化、电力、塑料橡胶等产业呈现集中趋势.     

Evaluation of two models of a slipmeter

The aim of the study was to compare the performances of the Brungraber Mark II (BM II) and Mark III (BM III) slipmeters. Friction measurements with the two slipmeters were conducted in a laboratory using four footwear materials, four floor types, and three surface conditions. Both the coefficient of friction (COF) values obtained with the slipmeters and the force platform-based COF values were measured. The COF measured with the BM II was slightly higher than that measured with the BM III with a R² of 0.83. A comparison of the averaged normal force between the two slipmeters showed that the BM II generated a significantly higher normal force than the BM III at a low COF and the difference of the normal force between the two slipmeters decreased when the COF value was increased. The regression analysis results in this study showed that the force platform-based COF values were closer to the COF values obtained with the BM III than with the BM II. The R² values for the regression model between the COF values obtained from the slipmeter and the force platform were 0.90 and 0.79 for the BM II and BM III, respectively.