MBR在危险废物处置中心废水处理中的应用

在危险废物处置中心废水现有处理工艺的基础上,提出以"水解酸化+MBR"为核心的组合工艺,有效解决了危废中心废水处理生化单元稳定性的问题。并以某危险废物处置中心废水处理工程为例,从废水水质,处理工艺和单体构筑物设计等方面进行了分析和探讨,以期为同类项目的建设提供借鉴和参考。     

上海市电子废物处理企业的环境管理实践

电子产品和家用电器的更新换代使得废弃电子电器成为城市新的污染源,危害着城市环境和人体健康。本文介绍了电子废弃物的定义、环境危害、回收利用价值及增长趋势,重点阐述了上海市废旧家电拆解企业的现状,并针对企业具体情况提出相应的管理对策。依法加强电子废物的环境管理,对促进循环经济的发展具有重要意义。     

蓝藻与厨余垃圾混合消化产甲烷研究

对太湖蓝藻采用资源化处置方式,通过与厨余垃圾混合发酵,达到优化发酵底物、获得最佳产气效率的目的。研究结果表明:随着蓝藻厨余垃圾混合物中厨余垃圾比例的提高（1:0.5～1:2.5）,甲烷产率提高,混合比例1:2.5时甲烷量达到最大,为123.94 mL/g（TS）,比1:0.5反应组提高了44.1%;混合物中厨余垃圾比例由1:2.5增至1:3.0,产气量反而下降;反应前24 h,体系中挥发性脂肪酸含量迅速增加,至第24 h酸量开始下降,第48 h再次上升,此后酸量减少并趋于稳定;反应过程中,各组分pH值均维持在正常范围内;反应结束后,混合比例为1:2.5组辅酶F₄₂₀最大,为1.98μmol/g（VS）,反应体系中藻毒素从发酵前的273～72.6μg/L降低到检测限5μg/L以下。     

城市有机废弃物联合厌氧发酵工程实例

摘要：本文以传祥垃圾综合处理厂为例,详细介绍了城市垃圾处理新工艺——“城市有机废弃物联合厌氧发酵工艺”,通过本工艺的实际运行效果来看,该工艺具有极大的推广应用价值。     

An overview for the utilization of wastes from stainless steel industries

Significant quantities of wastes are generated as the waste materials or byproducts every day from stainless steel processes. According to the origins and characteristics, the stainless steel wastes can be mainly classified into two categories, slags and dusts. They usually contained considerable quantities of valuable metals and materials. This paper summarized and analyzed the generation, composition, characteristics and the leaching behaviors of the most of wastes obtained from the stainless steel processes. On this basis, a review of several methods for treating the various stainless steel wastes was made. It is very essential not only for recycling the valuable metals and mineral resources but also for protecting the environment.     

电子废弃物理化性质研究

通过实验研究了印刷线路板和覆铜板厚度、热值及含水率等理化性质,并对其中的金、铜等贵金属含量进行了测定.结果显示,PCB和CCL的厚度分别是0.108 cm和0.054cm;PCB和CCL的高位定容弹筒发热量分别为8 310 J/g和9 320 J/g; PCB和CCL的含水率分别为接近1.3％和接近0.8％;PCB和C...     

破胶固化工艺处理钻井废物的应用研究

针对川渝地区钻井液的特点,确定川渝地区钻井废物无害化处理的工艺技术——破胶固化处理工艺。文章选取2006--2009年间实例展开论述,通过现场试验和监测技术相结合,总结出从废水处理、废物无害化处理、固体浸出液监测、停检点确认、余池处理等方面的过程管理办法。无害化治理工程效果显著,具有重要的指导性和实用性。     

废旧铝、铁片粉煤灰复合混凝剂的制备及在废水处理中的应用

我国粉煤灰和铝、铁片固体废物产量日益增多,危害越来越严重。在高温加热、搅拌条件下,用强酸浸渍粉煤灰和易拉罐碎片,使粉煤灰和废旧铝、铁片资源化,制得废旧铝、铁片粉煤灰复合混凝剂,并用所制得的废旧铝、铁片粉煤灰复合混凝剂处理屠宰废水。在一定条件下,经混凝试验处理后的屠宰废水pH值在7左右,COD去除率为92．0％,SS去除率为98．7％,浊度去除率为98．4％,色度去除率为96．6％。结果表明,粉煤灰和废旧铝、铁片资源化和在废水处理中的应用具有可行性。     

Novel microbial fuel cell design to operate with different wastewaters simultaneously

A novel single cathode chamber and multiple anode chamber microbial fuel cell design(MAC-MFC)was developed by incorporating multiple anode chambers into a single unit and its performance was checked.During 60 days of operation,performance of MAC-MFC was assessed and compared with standard single anode/cathode chamber microbial fuel cell(SC-MFC).The tests showed that MAC-MFC generated stable and higher power outputs compared with SC-MFC and each anode chamber contributed efficiently.Further,MAC-MFCs were incorporated with different wastewaters in different anode chambers and their behavior in MFC performance was observed.MAC-MFC efficiently treated multiple wastewaters simultaneously at low cost and small space,which claims its candidature for future possible scale-up applications.     

Comparison study of phosphorus adsorption on different waste solids: Fly ash, red mud and ferric–alum water treatment residues

The adsorption of phosphorus(P) onto three industrial solid wastes(fly ash, red mud and ferric–alum water treatment residual(FAR)) and their modified materials was studied systematically via batch experiments. Compared with two natural adsorbents(zeolite and diatomite), three solid wastes possessed a higher adsorption capacity for P because of the higher Fe, Al and Ca contents. After modification(i.e., the fly ash and red mud modified by FeCl_3 and FARs modified by HCl), the adsorption capacity increased, especially for the modified red mud, where more Fe bonded P was observed. The P adsorption kinetics can be satisfactorily fitted using the pseudo-second-order model. The Langmuir model can describe well the P adsorption on all of the samples in our study. p H and dissolved organic matter(DOM) are two important factors for P adsorption. Under neutral conditions, the maximum adsorption amount on the modified materials was observed. With the deviation from pH 7, the adsorption amount decreased, which resulted from the change of P species in water and surface charges of the adsorbents. The DOM in water can promote P adsorption, which may be due to the promotion effects of humic-Fe(Al) complexes and the pH buffer function exceeds the depression of competitive adsorption.