我国工业固体废物处理利用行业2013年发展综述

综述了我国工业固体废物处理利用行业2013年的发展环境形势和发展概况;介绍了2013年国内工业固体、危险废物及生活垃圾的产生量和处理情况;阐述并分析了目前国内固体废物处理技术和设施的现状;就行业发展存在的主要问题提出了建议.     

应用指数平滑法建立城市工业三废排放量预测模型

指数平滑法是常用的一种时间序列预测方法，但用于环境预测的先例则较少。本文以南通市１９８１－１９９０年工业三废排放量时间序列为例，简要介绍了该法的原理以及平滑计算、建模、预测和精度分析的过程，并对其在环境预测中的应用效果进行了探讨，结果表明，该法与目前环境预测中常用的回归法相比，具有数据来源较易，不需要特殊分布，计算简单，精度较高等明显的优点，充分显示出该法在环境预测中应用的可行性。     

钢铁冶炼渣的综合利用及发展对策

钢铁冶炼渣是钢铁企业开展资源利用的重点，冶炼渣的综合利用途径及利用水平与处理加工技术有密切关系，冶炼渣最多，影响大，易见成效，有利于综合利用工作向纵深发展，本文提出了合理利用建议。     

固体废弃物在新型墙体材料中的资源化利用

探讨了工业废弃物、农业废弃物和建筑废弃物在新型墙体材料中的各种资源化利用。将各种固体废弃物变废为宝,综合利用,能够减少对环境的污染,缓解资源紧张现象,是利国利民的好途径。     

Biosorption of Cr(VI) using low cost sorbents

Waste products from industrial operations, such as yohimbe bark, grape stalks, cork and olive stones were investigated for the removal of Cr(VI) from aqueous solutions. Equilibrium batch experiments at room temperature were performed. Metal uptake showed a pH-dependent profile and optimum uptake at initial pH between 2.0–3.0. Slight influence of NaCl on metal uptake was observed. The sorption data fitted well to the Langmuir model within the concentration range studied. Grape stalks proved to be the most efficient sorbent followed by yohimbe bark, cork and olive stones. N. Fiol is the recipient of the 2002 ACE Environmental Chemistry Award     

Chromium sorption on grape stalks encapsulated in calcium alginate beads

A novel sorbent based on 2% grape stalk wastes encapsulated in calcium alginate beads was investigated for the removal of Cr(VI) and Cr(III) from aqueous solutions. The sorbent proved to be efficient for chromium removal in both hexavalent and trivalent forms from aqueous solution at pH 3.0. In binary mixtures, the presence in solution of one of the forms enhances the sorption of the other which results in an increase of the amount of total chromium removed. This study suggests that the proposed sorbent can be used for the removal of chromium from wastewaters through a cost-effective and environmentally friendly process.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

湿热法处理实现厨余垃圾饲料化的研究

探索了湿热法工艺处理厨余垃圾并将其饲料化的可行性.实验表明,湿热法处理可以在满足消毒杀菌的同时,降低厨余原料中的高油脂含量和高含盐量,调节营养成分,实现物化性状的均一.经湿热法处理后的厨余垃圾的饲用价值得到明显改善,可作为良好的饲料原料,同时可回收利用油脂.总之,湿热法工艺可实现厨余垃圾的无害化、减量化和资源化处理,对于消除环境污染、缓解我国饲料原料紧张及资源回收利用等方面有着显著的环境效益、社会效益和经济效益,具有重要的现实意义.     

印刷线路板废弃物的热解与动力学实验研究

分别应用管式炉反应器和热重分析手段对印刷线路板废弃物的热解行为和热解动力学进行了实验研究。在管式炉中，研究不同的热解温度：700～950℃，对产物分布和气体成分分布的影响。实验结果表明：PCB热解气体的主要成分是H2和CO2，气体的热值较低，仅为2．09～5．41MJ/m^3，PCB不适合以气体产物为目标的能源利用方式。应用Friedman方法对PCB的热解动力学进行了研究，求得PCB的热解动力学参数分别是：表观活化能190．92kJ/mol，反应级数5．97，指前因子lnA47．14min^-1。