土壤连续属性空间插值方法及其精度的研究进展

作为土壤变化的时空定量监测方法,土壤属性空间插值方法及其精度是计量土壤学和"数字土壤"领域的重要研究内容。文章首先介绍了土壤属性空间插值的常用方法,包括克立格插值法(Kriging)、反距离权重法(IDW)、样条插值法(Spline)、贝叶斯最大熵(BME)、地理加权回归(GWR)以及高精度曲面建模方法(HASM);其次阐述了土壤属性空间插值精度验证的方法和指标;再次总结了能够提高土壤属性插值精度的6种途径,包括合理选择插值方法、准确设定插值方法参数、合理设计采样数目和密度、注意空间自相关程度和范围的影响、科学安排实验分析顺序以及结合辅助信息进行插值;最后从插值方法的选择、验证指标的选取以及辅助信息的结合三个方面指出了土壤属性空间插值方法及其精度的未来研究方向。     

森林植被影响径流形成机制研究进展

径流形成机制研究在水文学领域中具有十分重要的意义,且受到越来越广泛的重视。水文环境以及水文通量的空间异质性和时间变化性导致了水文过程的尺度依赖性和非线性特征,没有对水文过程较为清晰的认识,就不能将某一地区某一流域森林植被变化水文生态效应的研究结果简单地外推到其他地区和其他流域。开发基于物理过程分布式参数水文模型可以为认识森林植被变化的生态学后效和客观评价森林植被水文生态效益提供可行的工具。但是要实现这一目标,研究森林植被影响径流形成机制是问题的核心所在。另一方面,认识森林影响径流形成机制有助于研究水文学中的尺度问题。研究森林植被影响径流形成机制的主要方法包括水文测验、同位素示踪和动力水文学计算等,研究的空间尺度则为坡面与流域相接合。从已有的研究成果来看,森林植被影响径流形成机制可以概括为:①森林流域径流形成为变动源区产流机制;②森林流域径流形成主要受饱和地表径流、亚表层径流和地下径流的控制;③森林流域径流形成机制是相互作用和相互转化的;④优先流在森林流域径流形成中起到了至关重要的作用。     

Preparation of solar-enhanced AlZnO@carbon nano-substrates for remediation of textile wastewaters

Photoactive aluminum doped ZnO(AlZnO) was synthesized by sol-gel method.After that,AlZnO photocatalyst was deposited on five carbon-based materials(CBMs) using ultrasonic route followed by solid-state mixing using ball mill.The CBMs used were poly aniline(PANI),carbon nitride(CN),carbon nanotubes(CNT),graphene(G),and carbon nanofibers(CNF).The crystal phases,elemental compositions,morphological,and optical properties of the AlZnO@CBMs composites were investigated.Experimental results revealed that two of AlZnO@CBMs composites exhibited superior bleaching efficiency(100% removal) and photocatalytic stability(three cycles) for 50 μmol/L Methylene Blue(MB) contaminated water after 60 min irradiation in visible light at pH 6.5,0.7% H_2O_2,and 5 g/L inorganic salts.Under optimum conditions,AlZnO@CBMs nanocomposites were employed for the treatment of mixed dyestuffs composed of MB,Methyl Orange(MO),Astrazone Blue FRR(BB 69),and Rhodamine B(RhB) dyes under dark,ultraviolet,visible,and direct sunlight.For mixed dyestuffs,the AlZnO@G achieved the highest dye sorption capacity(60.91 μmol dye stuffs/g) with kinetic rate 8.22 × 10~(-3) min~(-1) in 90 min via multi-layer physisorption(Freundlich isotherm) on graphene sheet.In additions,AlZnO@CN offered the highest photo-kinetic rate(K_(photo)) of～54.1 × 10~(-3) min~(-1)(93.8% after 60 min) under direct sunlight.Furthermore,the selective radical trapping experiment confirmed that the holes and oxidative superoxide radicals are crucial on dyes photodegradation pathway.Owing to their superior performance,AlZnO@G and AlZnO@CN nanocomposites can offer an effective in-situ solar-assisted adsorption/photocatalytic remediation of textile wastewater effluents.     

城市街道汽车污染扩散规律模拟研究

如何简单而准确地模拟城市街区污染的扩散规律,对于城市汽车污染控制决策具有重要的意义,从大量实测数据,分析了风速风向等影响街道峡谷污染物扩散的主要因素,采用丹麦开发的街道峡谷模式ＯＳＰＭ,对汽车污染扩散规律进行模拟研究。与北京实测数据对比结果表明,该模式较好地模拟昼间风速风向对街道峡保内汽车污染扩散的影响,比较准确地反映了峡保中流场的主要特征,以及汽车排放污染物的扩散规律,污染物浓度与风速的倒数摈心     

地下水环境影响评价中污染物运移模拟软件的适宜性评估

目前国内外已发展了一系列成熟的地下水污染物运移模拟软件,但是软件功能各异,易造成使用者的选择困扰.为满足HJ 610—2016《环境影响评价技术导则地下水环境》（简称“《导则》”）中关于环境影响预测工作精细化的要求,对国内外常用饱和带和包气带污染物运移模拟软件的适宜性进行了评估.首先,针对三款常用饱和带污染物运移模拟软件BIOSCREEN、AT123D和MT3D,基于理想算例对比4组水动力条件设置下的计算结果,分析软件的适宜性;其次,针对《导则》中暂未给出的包气带污染物运移模拟软件,以FEMWATER为例探讨了包气带阻滞作用对于地下水环境影响评价的重要性.结果表明:①BIOSCREEN由于忽略了分子扩散作用,当Pe（Peclet数）为0.25×10-3时,其预测的污染源下游10 m处污染物浓度为AT123D和MT3D计算值的1.8倍,存在高估污染风险的可能.②相比污染源直接设置于潜水面的情景,污染物从距潜水面11 m的地表泄露,经过包气带后污染源强降低了24%,下游85 m处污染物浓度达到0.1 mg/L的时间延迟了390 d.③当地下水流速较慢,分子扩散作用相比对流作用占优势时,适用MT3D开展数值模拟或者采用AT123D进行解析预测;当对流作用占优势且水文地质条件接近解析解假设时,可利用BIOSCREEN粗估污染风险.研究显示,包气带污染物运移模拟软件有助于合理地预测污染物在地下水环境中的运移转化行为,从而更准确地估计污染源强和判定地下水环境污染风险.      

基于非线性响应函数和蒙特卡洛模拟的滇池流域污染负荷削减情景分析

为定量了解滇池外海水质对流域污染负荷削减率的响应变化程度,并评估相关决策的潜在风险,在长期的水质模拟结果基础之上,本文使用内嵌非线性响应函数的蒙特卡罗模拟方法,在2个不确定性水平下（5%和10%的变异范围）分析滇池外海为达到3个水质目标情景（Ⅲ类、Ⅳ类和Ⅴ类）的污染负荷削减及其不确定性.模型结果表明,在2种不确定性水平...     

结合外场观测分析珠三角二次有机气溶胶的数值模拟

结合2008年11月18~25日期间珠三角地区的二次有机气溶胶(SOA)外场观测数据,验证区域空气质量模式WRF/Chem(weather research and forecasting model with chemistry)中两种SOA化学机制——VBS(volatile basis set)和SORGAM(secondary organic aerosol model)对珠三角SOA的模拟效果.VBS机制考虑了更为广泛的SOA前体物和化学老化过程,SOA模拟值更接近观测值,能合理反映SOA观测值的逐天变化趋势,与观测值的平均绝对偏差和相关性分别是-4.88μg·m-3和0.91,而SORGAM机制的分别为-5.32μg·m-3和0.18.利用VBS机制模拟区域内SOA的时空分布,结果显示SOA浓度具有显著的昼夜变化特征,浓度峰值出现在中午时段.受到输送和臭氧区域分布的影响,各城市SOA浓度差异显著,下风向的城市(如中山、珠海、江门)SOA浓度较高.     

A numerical study of summer ozone concentration over the Kanto area of Japan using the MM5/CMAQ model

We assessed the ability of the MM5/CMAQ model to predict ozone (O3) air quality over the Kanto area and to investigate the factors that a ect simulation of O3. We find that the coupled MM5/CMAQ model is a useful tool for the analysis of urban environmental problems. The simulation results were compared with observational data and were found to accurately replicate most of the important observed characteristics. The initial and boundary conditions were found to have a significant e ect on simulated O3 concentrations. The results show that on hot and dry days with high O3 concentration, the CMAQ model provides a poor simulation of O3 maxima when using initial and boundary conditions derived from the CMAQ default data. The simulation of peak O3 concentrations is improved with the JCAP initial and boundary conditions. On mild days, the default CMAQ initial and boundary conditions provide a more realistic simulation. Meteorological conditions also have a strong impact on the simulated distribution and accumulation of O3 concentrations in this area. Low O3 concentrations are simulated during mild weather conditions, and high concentrations are predicted during hot and dry weather. By investigating the e ects of di erent meteorological conditions on each model process, we find that advection and di usion di er the most between the two meteorological regimes. Thus, di erences in the winds that govern the transport of O3 and its precursors are likely the most important meteorological drivers of ozone concentration over the central Kanto area.     

湖泊暴雨径流水质模拟研究

根据暴雨径流污染物浓度变化特点，采用最小二乘法对暴雨期间污染源各监测数据进行回归分析处理，对湖底糙率采用自动调整处理，建立了湖泊暴雨径流水质模型．对滇池湖泊某次暴雨过程的总磷和总氮进行了模拟研究，计算结果表明，该模型应用于滇池湖泊是成功的．     

Stepwise multiple regression method of greenhouse gas emission modeling in the energy sector in Poland

The energy sector in Poland is the source of 81% of greenhouse gas (GHG) emissions. Poland, among other European Union countries, occupies a leading position with regard to coal consumption. Polish energy sector actively participates in efforts to reduce GHG emissions to the atmosphere, through a gradual decrease of the share of coal in the fuel mix and development of renewable energy sources. All evidence which completes the knowledge about issues related to GHG emissions is a valuable source of information. The article presents the results of modeling of GHG emissions which are generated by the energy sector in Poland. For a better understanding of the quantitative relationship between total consumption of primary energy and greenhouse gas emission, multiple stepwise regression model was applied. The modeling results of CO₂ emissions demonstrate a high relationship (0.97) with the hard coal consumption variable. Adjustment coefficient of the model to actual data is high and equal to 95%. The backward step regression model, in the case of CH₄ emission, indicated the presence of hard coal (0.66), peat and fuel wood (0.34), solid waste fuels, as well as other sources (-0.64) as the most important variables. The adjusted coefficient is suitable and equals R² = 0.90. For N₂O emission modeling the obtained coefficient of determination is low and equal to 43%. A significant variable influencing the amount of N₂O emission is the peat and wood fuel consumption.