Biofiltration and disinfection codetermine the bacterial antibiotic resistome in drinking water: A review and meta-analysis

• Published data was used to analyze the fate of ARGs in water treatment. • Biomass removal leads to the reduction in absolute abundance of ARGs. • Mechanism that filter biofilm maintain ARB/ARGs was summarized. • Potential BAR risks caused by biofiltration and chlorination were proposed. The bacterial antibiotic resistome (BAR) is one of the most serious contemporary medical challenges. The BAR problem in drinking water is receiving growing attention. In this study, we focused on the distribution, changes, and health risks of the BAR throughout the drinking water treatment system. We extracted the antibiotic resistance gene (ARG) data from recent publications and analyzed ARG profiles based on diversity, absolute abundance, and relative abundance. The absolute abundance of ARG was found to decrease with water treatment processes and was positively correlated with the abundance of 16S rRNA (r² = 0.963, p<0.001), indicating that the reduction of ARG concentration was accompanied by decreasing biomass. Among treatment processes, biofiltration and chlorination were discovered to play important roles in shaping the bacterial antibiotic resistome. Chlorination exhibited positive effects in controlling the diversity of ARG, while biofiltration, especially granular activated carbon filtration, increased the diversity of ARG. Both biofiltration and chlorination altered the structure of the resistome by affecting relative ARG abundance. In addition, we analyzed the mechanism behind the impact of biofiltration and chlorination on the bacterial antibiotic resistome. By intercepting influent ARG-carrying bacteria, biofilters can enrich various ARGs and maintain ARGs in biofilm. Chlorination further selects bacteria co-resistant to chlorine and antibiotics. Finally, we proposed the BAR health risks caused by biofiltration and chlorination in water treatment. To reduce potential BAR risk in drinking water, membrane filtration technology and water boiling are recommended at the point of use.     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

基于VB6.0的供水管网震害预测方法和软件

为了提高供水管网震害预测的效率,修订了现有供水管网震害预测模型,应用Visual Basic 6.0软件平台,开发了供水管网震害预测软件。震害预测软件提供了两方面的预测功能,分别为不同地震烈度下供水管段基于三态的破坏等级预测和供水管网基于五态的破坏等级预测。软件实现了批量供水管段及整个管网的震害预测,且可以进行管网在设定地震下的震害预测,提高了预测效率。经算例分析,验证了软件的可靠性。     

Monitoring of a Coastal Mediterranean Area: Culturable Bacteria, Phytoplankton, Environmental Factors and their Relationships in the Southern Adriatic Sea

Culturable heterotrophic bacterial and phytoplanktonic densities were investigated at four sites in the Southern Adriatic Sea (Brindisi, S. Cataldo, Otranto and S. M. di Leuca) over an annual cycle. The main phytoplankton groups, the bacterial biodiversity, as well as the faecal contamination indicators were determined. Culturable bacterial numbers averaged 4.8 ± 0.2 log CFU ml⁻¹ whereas phytoplankton numbers averaged 2.1 ± 0.4 log cells ml⁻¹. Relationships between culturable bacteria, phytoplankton and the environmental factors were established. Bacterial and phytoplankton densities usually depended significantly on temperature, dissolved oxygen, phosphate and nitrite only in the S. Cataldo transect. In all the examined transects phytoplankton showed a bloom during the January–February period followed by a bacterial peak during the February–March period. Thus we can suppose that the phytoplankton winter bloom is responsible for the availabily of organic matter for bacterial populations in the following months in this oligotrophic ecosystem.     

Qualidex – A New Software for Generating Water Quality Indice

Water quality indice are necessary for resolving lengthy, multi-parameter, water analysis reports into single digit scores. This, in turn, is essential for comparing the water quality of different sources and in monitoring the changes in the water quality of a given source as a function of time and other influencing factors.In this paper we present the computer-automated tool QUALIDEX (water QUALIty inDEX), which has been developed by us to generate and operate water quality indice. Several popular indice – such as the Oregon Water Quality Index developed in the 1970s by Oregon Department of Environmental Quality and later updated in 1995, the Aquatic Toxicity Index developed by Wepener and coworkers for protection of aquatic life at the Olifants river, Kruger National Park, South Africa, the water quality index developed by Dinius in 1987, the Overall Index of Pollution (of surface waters) developed at the National Environmental Engineering Research Institute (NEERI), and the water quality index of the Central Pollution Control Board (CPCB) – have also been added to QUALIDEX in modular form. There is also a New water quality index sub-module which enables the user to generate his or her own index and compare its performance with these well-known indice. The package is also capable of analyzing the variations in the water quality of different sites at different times. The software has been coded in Visual C++ and has been integrated with MS Access database.     

Characterisation of Selected Lentic Habitats of Dharwad, Haveri and Uttar Kannada Districts of Karnataka State, India

Water quality survey was undertaken to study the current status of water quality of some lentic habitats of Dharwad, Haveri and Uttar Kannada districts, to provide a baseline data, comprising study of their main physical and chemical characteristics and also to evaluate the recent limnological changes those have occurred over a time period in some lentic habitats. Trophic status was also analysed. Present study reveals that Unkal lake, and B.K. Shigigatti tank of Dharwad district, Timmapur, Hosalli, and Krishnapur tanks of Haveri district are fast progressing towards hypereutrophication. Of the other tanks, Galgi tank of Dharwad district, Gudgur, Hanamapur, Medleri, and Kadkol tanks of Haveri district have reached the eutrophic stage. The anthropogenic activities, sewage and fertilizers used in agricultural fields appear to be the major causes of the eutrophication in these tanks. If the habitats have to be preserved for their intended use, sustainable and holistic management measures for the remediation of the tanks are an immediate necessity.     

Simple Model of Dissolved Oxygen Consumption in a Bay within High Organic Loading: An Applied Remediation Tool

San Vicente Bay is a coastal shallow embayment in Central Chile with multiple uses, one of which is receiving wastewater from industrial fisheries, steel mill effluents, and domestic sewage. A simulation model was developed and applied to dissolved oxygen consumption by organic residues released into this embayment. Three compartments were established as function of: depth, circulation and outfall location. The model compartments had different volumes, and their oxygen saturation value was used as baseline. The parameters: (a) BOD₅ of the industrial and urban effluents, (b) oxygen demand by organic sediments, (c) respiration, (d) photosynthesis and (e) re-aeration were included in the model. Iteration results of the model showed severe alterations in Compartment 1, with a decrease of 65% in the oxygen below saturation. Compartment 2 showed a small decline (10%) and compartment 3 did not show apparent changes in oxygen values. Measures recommended for remediation were to decrease the BOD₅ loading by 30% in the affected sector. Iteration of the model for 200 h following recommendations derived from the preceding results produced an increase in saturation of 60% (5 ml O₂ L⁻¹), which suggested an improvement of the environmental conditions.     

Integrating Remote Sensing Approach with Pollution Monitoring Tools for Aquatic Ecosystem Risk Assessment and Managment: A Case Study of Lake Victoria(UGANDA)

Aquatic ecosystems around the world, lake, estuaries and coastal areas are increasingly impacted by anthropogenic pollutants through different sources such as agricultural, industrial and urban discharges, atmospheric deposition and terrestrial drainage. Lake Victoria is the second largest lake in the world and the largest tropical lake. Bordered by Tanzania, Uganda, and Kenya, it provides a livelihood for millions of Africans in the region. However, the lake is under threat from eutrophication, a huge decline in the number of native fish species caused by several factors including loss of biodiversity, over fishing and pollution has been recently documented. Increasing usage of pesticides and insecticides in the adjacent agricultural areas as well as mercury contamination from processing of gold ore on the southern shores are currently considered among the most emergent phenomena of chemical contamination in the lake. By the application of globally consistent and comprehensive geospatial data-sets based on remote sensing integrated with information on heavy metals accumulation and insecticides exposure in native and alien fish populations, the present study aims at assessing the environmental risk associated to the contamination of the Lake Victoria water body on fish health, land cover distribution, biodiversity and the agricultural area surrounding the lake. By the elaboration of Landsat 7 TM data of November 2002 and Landsat 7 TM 1986 we have calculated the agriculture area which borders the Lake Victoria bay, which is an upland plain. This process has greatly enhanced nutrient loading to the soil, which is subsequently transported to the lake by rain or as dry fall. All the data has been insert in the Geographical information System (ARCGIS) to be upgraded and consulted. Heavy metals in fish fillets showed concentrations rather low except for mercury being higher than others as already described in previous investigations. In the same tissue, cholinesterases activity (ChE) as an indicator of insecticides exposure showed significant differences among fish species in both activity and sensitivity of selected inhibitor insecticides. This integrated approach aims at identifying and quantifying selected aquatic environmental issues which integrated with monitoring techniques such as contaminant concentrations and biological responses to insecticides exposure in fish populations will provide a scientific basis for aquatic zones management and assist in policy formulations at the national and international levels.     

Comparison of Nitrate Levels in Raw Water and Finished Water from Historical Monitoring Data on Iowa Municipal Drinking Water Supplies

Nitrate contamination of water sources is a concern where large amounts of nitrogen fertilizers are regularly applied to soils. Ingested nitrate from dietary sources and drinking water can be converted to nitrite and ultimately to N-nitroso compounds, many of which are known carcinogens. Epidemiologic studies of drinking water nitrate and cancer report mixed findings; a criticism is the use of nitrate concentrations from retrospective drinking water data to assign exposure levels. Residential point-of-use nitrate data are scarce; gaps in historical data for municipal supply finished water hamper exposure classification efforts. We used generalized linear regression models to estimate and compare historical raw water and finished water nitrate levels (1960s--1990s) in single source Iowa municipal supplies to determine whether raw water monitoring data could supplement finished water data to improve exposure assessment. Comparison of raw water and finished water samples (same sampling date) showed a significant difference in nitrate levels in municipalities using rivers; municipalities using other surface water or alluvial groundwater had no difference in nitrate levels. A regional aggregation of alluvial groundwater municipalities was constructed based on results from a previous study showing regional differences in nitrate contamination of private wells; results from this analysis were mixed, dependent upon region and decade. These analyses demonstrate using historical raw water nitrate monitoring data to supplement finished water data for exposure assessment is appropriate for individual Iowa municipal supplies using alluvial groundwater, lakes or reservoirs. Using alluvial raw water data on a regional basis is dependent on region and decade.     

Chlorination Byproducts in Drinking Water Produced from Thermal Desalination in United Arab Emirates

Oil activities in the Arabian Gulf can potentially affect the quality of the intake water available for coastal desalination plants. This paper addresses such situation by investigating the quality of intake water and desalinated water produced by a desalination plant located near a coastal industrial complex in United Arab Emirates (UAE). Analyses of the organic compounds on the intake seawater reported non-detected levels in most samples for the three tested organic groups; namely Polyaromatic Hydrocarbons (PAHs), Phenols, and Polychlorinated Biphenyls (PCBs). Trihalomethanes (THMs) and Haloacetic Acids (HAAs) were also tracked in the intake sea water, throughout the desalination processes, and in the final produced drinking water, to evaluate the undertaken pre- and post chlorination practices. The levels of considered Chlorination Byproducts (CBPs) were mostly found below the permissible international limits with few exceptions showing tangible levels of bromoform in the intake seawater and in the final produced drinking water as well. Lab-controlled experiments on the final produced distillate showed little contribution of its blending with small percentage of seawater upon the formation of trihalomethane and in particular, bromoform. Such results indicate that the organic precursors originated in the seawater are responsible for bromoform formation in the final distillate.