污水处理工艺系统优化设计理论的研究与发展

综述了污水处理工艺系统优化设计理论研究的发展历史 ,分析总结了优化设计模型研究的发展规律以及需要解决的关键性问题 ;详细介绍了几个具有典型代表性的非线性系统优化模型的结构及寻优方法 ;从 6个特征方面横向比较了部分优化数学模型的研究成果 ;结合国内研究动态提出了对该领域研究前景的展望     

A triple-continuum approach for modeling flow and transport processes in fractured rock

This paper presents a triple-continuum conceptual model for simulating flow and transport processes in fractured rock. Field data collected from the unsaturated zone of Yucca Mountain, a repository site of high-level nuclear waste, show a large number of small-scale fractures. The effect of these small fractures has not been considered in previous modeling investigations within the context of a continuum approach. A new triple-continuum model (consisting of matrix, small-fracture, and large-fracture continua) has been developed to investigate the effect of these small fractures. This paper derives the model formulation and discusses the basic triple-continuum behavior of flow and transport processes under different conditions, using both analytical solutions and numerical approaches. The simulation results from the site-scale model of the unsaturated zone of Yucca Mountain indicate that these small fractures may have an important effect on radionuclide transport within the mountain.     

Effects of uncontrolled particulate matter release on precipitation under warfare conditions

This study has shown theoretical, observed and experimental evidence of pollutants released, transported and deposited during the Kosovo conflict in 1999 and their effects on precipitation in Serbia. The greatest bombardment of the chemical industry, oil refineries and fuel storage in Serbia which occurred during April, resulted in releases of many hazardous, toxic and cancerogenic substances. The number of April's days with precipitation greater or equal to 0.1 mm in 1999 are compared to those in the period from 1961 to 1990 registered at thirty meteorological stations in Serbia and especially at the Belgrade-Observatory station in the period from 1888 to 1995. The maximums of days with precipitation greater or equal to 0.1 mm were at the wider Belgrade area and at the central and southwestern parts of Serbia during April 1999. This is confirmed by using the Eta trajectory analysis.     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.     

模糊神经网络控制在污水处理中的应用研究

对模糊神经网络(FNN)技术应用于污水处理进行了研究,提出了一个具有五层的模糊神经网络控制器,仿真实验表明,该控制系统具有很强的鲁棒性与容错性.该控制器能够自动调整隶属度函数、动态优化控制规则,将其应用于溶解氧控制和出水水质预测,结果表明可以快速、有效地使溶解氧浓度达到期望值,实际出水水质预测结果也具有很好的收敛性和预测精度.     

A new approach for modelling potential effects in cation adsorption onto binary (hydr) oxides

The current approach for modelling ion adsorption onto binary (hydr)oxides using homogeneous surface complexation models involves the assumption of either an ideal mixture of the two surfaces (i.e. two surface sites on one surface) or a patchwise surface (i.e. two surfaces with one surface site on each surface). As the physical truth should be between these two limiting cases, a model which assumes a patchwise surface constituted of three patches is proposed. Two patches represent the distinct (hydr)oxides, and the third one a mixture of these distinct (hydr)oxides. Using the diffuse layer model, the three approaches are applied to literature data for Cd adsorption onto binary mixtures of alumina-coated silica at total constant Cd concentration and varying amounts of alumina coatings. For Cd adsorption onto these binary (hydr)oxide systems, the new approach explains the observed potential effects. The proposed model, which contains two additional adjustable parameters in terms of site concentrations or one adjustable parameter in terms of specific surface area, is more successful than the two limiting cases. The new model is then validated by predicting Ca and Zn behaviour on the same binary (hydr)oxide system.     

Model reactor for photocatalytic degradation of persistent chemicals in ponds and waste water

A laboratory scale flow-through model reactor for the degradation of persistent chemicals using titanium dioxide (TiO₂) as photocatalyst immobilized on glass beads is presented. In the test system with a volume of 18 L contaminated water is pumped to the upper part of the floating reactor and flows over the coated beads which are exposed to UV-radiation. The degradation of two dyes of different persistance was investigated. Primary degradation of methylene blue did not fit a first order kinetic due to coincident adsorption onto the photocatalyst and direct photolysis, resulting in a half-life of 6 h. A filtrate of a green algae suspension accelerated the colour removal. In contrast, reactive red 2 was degraded only by photocatalysis; neither adsorption nor direct photolysis led to a colour removal. The course of primary degradation followed a first order kinetic with a half-life of 18 h and a rate constant of 0.04 h⁻¹. Analysis of the degradation products indicated mineralization by detection of NO₂⁻ and NO₃⁻, accompanied by a decrease of pH and an increase of conductivity. A successful adaptation of the model reactor (scale 1:10) to dimensions required for surface waters and waste water treatment plants would be a costefficient and environmentally sustainable application of photocatalysis for the treatment of industrially polluted water and could be of relevance for third world contries, particularly those favoured by high solar radiation.     

Spatial inhomogeneity in pollutant concentrations, and their implications for air quality model evaluation

The Southern California Air Quality Study database provides a valuable resource with which to test urban-scale photochemical models and to achieve a better understanding of the atmospheric dynamics of pollutant formation. The CIT model was evaluated using the SCAQS database according to traditional model performance guidelines. A first application, reported previously, focused on model enhancement and application of the model to the 27–29 August 1987 episode. This study evaluates the CIT model using the 24–25 June SCAQS episode, providing further evaluation of the model. Results show that the CIT airshed model can follow the diurnal variations of reactive species and the transport for relatively unreactive species. The normalized gross error for ozone was 31 % in June compared to 38% in August. However, to fully judge model performance in proper perspective, a question arises: “How well do the measurements reflect the air quality surrounding the monitoring station, not just in that location?” This is an important but seldom quantitatively considered factor, not only in model evaluation but in the study of health effects as well. Analyses indicate that individual concentration measurements only approximately represent the true volume-averaged concentrations within a computational grid cell and that significant spatial variations exist. Thus any evaluation of models using these data sets should take these local variations into consideration. A series of tests found that the local inhomogeneities had a normalized gross error in the range of 25–45% depending on the pollutant. In this context, the performance of the CIT model is consistent with known modeling limitations such as emissions inventories and sub-grid scale variation of observations.     

中国工业企业排污强度影响因素的实证分析

在均衡污染模型的基础上,采用中国省级面板数据,选取4种代表性工业污染物,分析了东中西部工业企业排污强度的影响因素及区域差异。实证研究表明,东中部地区的污染排放强度随经济发展相对水平的上升而下降,而西部地区仍是将经济发展放在环境保护之上。其次,随着受教育水平的提高,先是工业企业得到发展从而带来更大的污染,随着当地对环境的关注逐渐加强,排污强度开始下降。