基于MODIS地面温度数据的成都市热岛时空变化

研究利用2000、2005和2010年逐月的MODIS/Terra和MODIS/Aqua卫星的地表温度数据产品,通过等间距法进行分析,得出成都市建成区2000~2010年间昼夜热岛的时空变化以及相互间差异。研究结果表明:成都市昼夜热岛存在显著差异,日间热岛主要呈散点分布,夜间热岛集中在城市中心区域。日夜间热岛变化趋势有显著不同,日间热岛继续分散而夜间热岛范围则有所扩大。日间热岛分布与植被覆盖存在一定的负相关性,但道路也在一定程度上促使了地面温度的增加,夜间城市热岛范围及变化则与其下垫面组成存在关系。     

密相塔半干法烟气脱硫塔内加湿降温及其对脱硫效率的影响

为了实现密相塔半干法脱硫工艺的精确加湿进一步提高系统脱硫效率,利用推导出的传热传质计算方法,得到烟气温度降低和加水量的关系.结合3组密相塔半干法工程实际数据,发现理论计算值和实测值误差区间仅为2.9％ ～5.4％.通过选取河北某钢厂210 m2烧结烟气密相塔半干法脱硫项目实际在线检测数据,发现循环脱硫灰含湿量为3％的系统脱硫效率整体高于含湿量为5％和4％的样品,最大值达93.56％.通过粒度分析、扫描电镜、X射线衍射及差热-热重对2种不同含湿量的循环脱硫灰进行表征,结果表明,含湿量为3％的循环脱硫灰较含湿量为5％的样品粒径小、比表面积大,无团聚现象,物相分析还证实相对于含湿量为5％样品,其Ca(OH)2和结晶水含量少,几乎都是CaSO4和CaS03干态物质,因此脱硫反应进行彻底,脱硫效率较高.     

基于分布型电力系统的 PSO 优化设计

优化了传统粒子群算法,运用了混沌算法对粒子做初始化,优化了传统粒子群算法的收敛特性,并在算法的优化过程中,增加了混沌干扰元素对整体最优化极值做混沌干扰,将符合杂交几率的优化粒子做杂交处理,提高了粒子群的种类,增强了粒子群算法的搜寻水平。并通过IEEE33节点的分布型电力系统做无功优化仿真验证,通过比较,验证了优化算法的优越性与准确性。     

面源模式的通用算法探讨

提出了矩形面源扩散模拟计算的数值积分法和中心虚点源法,以及二者结合的综合法,并用算例进行了计算精度、计算速度和结果连续性的对比.结果表明:与传统的后置虚点源法及其改进算法——谷清经验法相比,该算法与理论真值的相对误差可从20%以上降低到3%以下,并且可以准确地反映风向和面源的形状,但在计算量上要增大十几倍到上百倍.对于任意不规则面源,提出了正方形分割算法,并对分割正方形的取舍采用简便的重心判断法,以准确方便地模拟其形状.综合运用笔者提出的适于机算的通用面源算法,对不同的计算任务权衡速度和精度采用合适的算法,可以处理各种气象条件下任意形状面源的扩散计算,并可取得理想的计算精度.      

Location selection of emergency supplies repositories for emergency logistics management: A variable weighted algorithm

With the development of the city, the number of establishments that are proposed or under construction is increasing year by year, and if they are industries that handle flammable, explosive, toxic, harmful, and dangerous substances, the public safety will face great threats, which will bring great challenges to emergency rescue work. Therefore, providing reasonable solutions to the problem of location selection of emergency supplies repositories are necessary for improving the emergency response efficiency in chemical industrial parks. A mathematical model for location selection of emergency supplies repositories in emergency logistics management are presented considering more actual factors. The optimization objectives of the model are to minimize total transport length and cost. And then a Variable Weighted Algorithm is designed to solve the model, where an auxiliary function was constructed with different methods of building weighting factors based on the theory and method of solving multi-objective optimization problems in operational research. Simulation results show the effectiveness and feasibility of the models and algorithms presented in this paper.     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.     

AHP与GA-SVM耦合模型在滑坡预警中的应用*

为了减少滑坡造成的损失,提高滑坡预测的准确性,通过搭建灾害模拟平台获得滑坡的实验数据,在获得多组模拟实验数据后,分析各变量的特性。首先,通过层次分析(Analytic Hierarchy Process,AHP)算法,对滑坡进行危险度划分;然后,通过支持向量机(Support Vector Machine,SVM)建立模型,遗传算法(Genetic Algorithm,GA)再优化SVM参数,提出1种层次分析法与GA-SVM相耦合的模型。研究结果表明:AHP方法划分后的数据,通过GA与SVM结合建立的模型精度较好,实验预测结果与实际结果较为吻合,与单一SVM相比,精度更高,结果更好,更加适用于多变量的复杂非线性滑坡预警。     

提高GPS定位精度的群调度滤波算法*

为解决现行安全生产科技领域中全球定位系统（GPS）/惯性导航系统（INS）融合系统容易产生较大时变误差的关键问题,满足GPS定位信号的精度和信号数据处理时间的要求,提出1种群调度滤波算法,通过实验仿真,分别与模糊算法、机器学习算法及卡尔曼滤波网络算法进行比较研究。结果表明:群调度滤波算法兼顾了定位精度与数据处理时间,具有较大优势,可在航空安全、船舶安全、应急监测、灾后抢险等安全科技领域广泛应用。     

基于人工神经网络的气体泄爆最大超压预测研究

为解决传统经验公式在预测气体泄爆中最大超压出现时的较大偏差或过于保守的问题,提出使用人工神经网络预测气体泄爆最大超压。基于124组实验数据,采用BP与RBF神经网络,通过优化算法计算与迭代循环对泄爆样本中的影响因素进行降维与选择,并确定2类神经网络本身在学习与计算气体泄爆样本时的相关参数。结果表明:PCA（主成分分析法）在当前样本条件下的降维效果较差,而通过迭代对比确认气体泄爆样本中的5类特征全部保留时神经网络的训练模拟效果最好;通过对124组实验数据进行随机挑选训练集与测试集的训练模拟结果发现,神经网络对气体泄爆中最大超压的预测效果较好;通过对比Molkov提出的和经Fakandu等改进的NFPA 68经验公式以及2类神经网络的预测结果表明,神经网络相比于传统气体泄爆经验公式具有明显优势。     

Forecasting China’s primary energy demand based on an improved AI model

An improved energy demand forecasting model is built based on the autoregressive distributed lag (ARDL) bounds testing approach and an adaptive genetic algorithm (AGA) to obtain credible energy demand forecasting results. The ARDL bounds analysis is first employed to select the appropriate input variables of the energy demand model. After the existence of a cointegration relationship in the model is confirmed, the AGA is then employed to optimize the coefficients of both linear and quadratic forms with gross domestic product, economic structure, urbanization, and technological progress as the input variables. On the basis of historical annual data from 1985 to 2015, the simulation results indicate that the proposed model has greater accuracy and reliability than conventional optimization methods. The predicted results of the proposed model also demonstrate that China will demand approximately 4.9, 5.6, and 6.1 billion standard tons of coal equivalent in 2020, 2025, and 2030, respectively.