徐州市生活垃圾填埋场地下水典型金属污染物研究

在对徐州地区生活垃圾填埋场调查分析的基础上,根据填埋特征和地质状况选取4座典型填埋场为调查对象,采用ICP-MS对垃圾渗滤液及地下水中26种重金属进行监测分析。结果表明,在4个垃圾填埋场地下水及渗滤液中ρ(Sr)均相对较高(700μg/L);地下水中金属元素均正在以Ca,Mg为主向Na,Mg为主转化;地下水中Al,B质量浓度大小顺序为Y场(雁群)S场(睢宁)C场(翠屏山)P场(邳州);4个垃圾填埋场共同典型重金属污染物为Mn,Fe,Zn,Ba;除上述污染物外,Y场地下水潜在典型重金属污染物为Pb和Mo;S场为Mo和As;C场为Tl和Co;P场为As。     

预浓缩与GC-MS联用分析垃圾填埋场恶臭气体

采用预浓缩与气相色谱-质谱联用,建立了垃圾填埋场几种恶臭气体的分析方法。该法用SUMMA罐采集垃圾填埋场臭气,经预浓缩系统冷凝浓缩后,用GC-MS分析测定。几种臭气的检出限均低于3.0×10-3mg/m3,经6次重复测定,其相对标准偏差低于10%。该法已用于西安市江村沟垃圾填埋场臭气的采样分析。该法的应用增强了西安市对臭气的监测分析能力。     

垃圾渗滤液中典型内分泌干扰物质(EDCs)细胞毒性分析

垃圾渗滤液的人类健康风险评估日益受到人们重视,也成为研究热点。本文采用一种新型高级氧化技术UV-Fenton处理渗滤液,并用人体乳腺癌细胞(MCF-7)评估处理过程中渗滤液原液以及渗滤液中典型内分泌干扰物质(EDCs)的细胞毒性,对垃圾渗滤液中EDCs的细胞毒性和变化规律进行了研究。结果表明渗滤液中的邻苯二甲酸二丁酯(DBP)、双酚A(BPA)、壬基酚(NP)是产生细胞毒性的主要物质,其毒性大小为DBPBPANP。在同样的氧化降解过程中显示出不同毒性变化规律,通过GC-MS分析,结果显示UV-Fenton过程中产生了大量的中间产物,这也是引起毒性变化的主要原因。实验结果也说明垃圾渗滤液细胞毒性可以通过UV-Fenton过程有效去除。     

城市生活垃圾机械生物处理效果

采用机械生物处理工艺研究了淋洗水解、脱水与好氧生物干燥对城市生活垃圾的处理效果.结果表明:在淋洗水解及压榨脱水机械生物处理阶段,控制淋洗液与生活垃圾重量比2∶1,停留时间1.2 ～1.4 d条件下,生活垃圾可以减量49.7％.而过程中产生的淋滤液COD为32 939 mg/L、pH为5.1、COD∶N∶P=261∶5∶3.6,可以进行厌氧消化处理或作为碳源进行资源化利用.在好氧生物干燥阶段,通风量采用0.08 m3/min,2～3d堆体温度可升至73℃,7d左右即可产出LCV高达15 000 kJ/kg左右的高品位垃圾衍生燃料(RDF),其产率为38.2％,氯元素含量低于0.5％,重金属含量较低,满足燃料要求.     

强化垂直流可渗透反应墙处理渗滤液污染物

针对垃圾渗滤液污染物组分多、处理难度大、可生化性差的特点,基于可渗透反应墙(PRB)被动修复技术,通过多种填料的组合构建三重垂直流PRB强化的砂箱模型,对垃圾渗滤液进行连续动态处理研究。实验结果表明,填料的组合顺序对强化PRB系统净化能力有较大的影响,由无烟煤、沸石、钢渣依次组成的强化垂直流PRB系统(2#砂箱)对NH+4-N、NO-3-N、NO-2-N、COD、PO3-4-P的平均去除率分别为96.12%、30.36%、75.24%、39.03%和30.47%,处理效果明显好于相同条件下依次由无烟煤、钢渣、沸石组成的强化垂直流PRB系统(1#砂箱)。与常规PRB处理系统相比,强化垂直流可渗透反应墙系统可实现垃圾渗滤液中多种污染物同步有效去除,是极具发展潜力的新型技术。     

Steel slags in a landfill top cover – Experiences from a full-scale experiment

A full scale field study has been carried out in order to test and evaluate the use of slags from high-alloy steel production as the construction materials for a final cover of an old municipal landfill. Five test areas were built using different slag mixtures within the barrier layer (liner). The cover consisted of a foundation layer, a liner with a thickness of 0.7 m, a drainage layer of 0.3 m, a protection layer of 1.5 m and a vegetation layer of 0.25 m. The infiltration varied depending on the cover design used, mainly the liner recipe but also over time and was related to seasons and precipitation intensity. The test areas with liners composed of 50% electric arc furnace (EAF) slag and 50% cementitious ladle slag (LS) on a weight basis and with a proper consistence of the protection layer were found to meet the Swedish infiltration criteria of ?50 l (m² a)^?1 for final covers for landfills for non-hazardous waste: the cumulative infiltration rates to date were 44, 19 and 0.4 l (m² a)^?1 for A1, A4 and A5, respectively. Compared to the precipitation, the portion of leachate was always lower after the summer despite high precipitation from June to August. The main reason for this is evapotranspiration but also the fact that the time delay in the leachate formation following a precipitation event has a stronger effect during the shorter summer sampling periods than the long winter periods. Conventional techniques and equipment can be used but close cooperation between all involved partners is crucial in order to achieve the required performance of the cover. This includes planning, method and equipment testing and quality assurance.     

Using multivariate regression modeling for sampling and predicting chemical characteristics of mixed waste in old landfills

Municipal solid waste landfills pose a threat on environment and human health, especially old landfills which lack facilities for collection and treatment of landfill gas and leachate. Consequently, missing information about emission flows prevent site-specific environmental risk assessments. To overcome this gap, the combination of waste sampling and analysis with statistical modeling is one option for estimating present and future emission potentials. Optimizing the tradeoff between investigation costs and reliable results requires knowledge about both: the number of samples to be taken and variables to be analyzed.This article aims to identify the optimized number of waste samples and variables in order to predict a larger set of variables. Therefore, we introduce a multivariate linear regression model and tested the applicability by usage of two case studies. Landfill A was used to set up and calibrate the model based on 50 waste samples and twelve variables. The calibrated model was applied to Landfill B including 36 waste samples and twelve variables with four predictor variables.The case study results are twofold: first, the reliable and accurate prediction of the twelve variables can be achieved with the knowledge of four predictor variables (Loi, EC, pH and Cl). For the second Landfill B, only ten full measurements would be needed for a reliable prediction of most response variables. The four predictor variables would exhibit comparably low analytical costs in comparison to the full set of measurements. This cost reduction could be used to increase the number of samples yielding an improved understanding of the spatial waste heterogeneity in landfills.Concluding, the future application of the developed model potentially improves the reliability of predicted emission potentials. The model could become a standard screening tool for old landfills if its applicability and reliability would be tested in additional case studies.     

有机改性成都粘土预处理垃圾渗滤液

以成都粘土为原料,十六烷基三甲基溴化铵(HDTMA)为改性剂制备有机改性土,并将其应用于垃圾渗滤液的预处理。采用单因素静态吸附实验,以粘土对垃圾渗滤液COD和氨氮的去除率作为考查指标,初步探究有机改性土预处理垃圾渗滤液的适宜条件;并对有机改性粘土及原土进行性能表征,初步分析其吸附机理。研究结果表明,有机土的处理效果明显优于原土,处理效果上比原土提高了1.6~2.3倍;有机土预处理垃圾渗滤液适宜条件为:投加量120 g/L、搅拌速度200 r/min、搅拌时间50 min、pH=7、静置时间为6 h。     

垃圾焚烧发电厂渗滤液MBR-NF截留液中腐植酸的超滤分离回收

垃圾焚烧发电厂渗滤液MBR-NF膜截留液因含有高浓度的难降解有机物和无机盐而难以处理。考虑其所含有机物大部分为腐植酸,可加于资源利用。本研究采用超滤对MBR-NF膜截留液中的腐植酸进行分离回收。实验结果表明,超滤能有效分离截留液中有机物和无机盐离子,分离因子与体积浓缩倍数(CF)呈良好的线性关系;回收样品的腐植酸含量达到36 g/L以上,重金属含量低于相关标准限值,表明采用超滤分离回收垃圾焚烧发电厂渗滤液MBR-NF截留液中的腐植酸是可行的。     

渗滤液耦合矿化垃圾制备甲烷氧化菌菌液

利用甲烷氧化菌菌液增加材料中甲烷氧化菌的数量,可以得到高甲烷氧化率的填埋场甲烷生物氧化覆盖材料。研究发现,渗滤液原水和渗滤液处理尾水均能促进甲烷氧化菌的生长,可利用渗滤液耦合矿化垃圾混合培养制备甲烷氧化菌菌液用于填埋场甲烷减排。填埋龄长的渗滤液原水有着较好的培养效果,得到的菌液在4 d内最高甲烷氧化速率达到2.68 mL/h,超过甲烷氧化菌培养液(nitrate minimal salt medium,NMS)的实验结果。渗滤液中总氮、无机碳、总有机碳和Ni元素的含量对甲烷氧化菌的培养过程影响较大,适用于甲烷氧化培养的渗滤液应满足:总氮1 400 mg/L,总有机碳55 mg/L,Ni元素0.4 mg/L,总磷含量较高。