Renormalized numerical simulation of flow over planar and non-planar fractal trees

We review the fundamentals of a new numerical modeling technique called Renormalized Numerical Simulation (RNS). The goal of RNS is to model the drag force produced by high Reynolds-number turbulent flow over objects that display scale-invariant properties, objects such as tree-like fractals. The hallmark of RNS in this application is that the drag of the unresolved tree branches is modeled using drag coefficients measured from the resolved branches and unresolved branches (as modeled in previous iterations of the procedure). In the present paper, RNS is used to study the effects of branch orientation on the drag force generated by highly idealized trees in which trunk and branches have square cross-section, and the branches all lie in a plane perpendicular to the incoming flow. Then, the procedure is generalized to the more general case of non-planar branch arrangements. Results illustrate that RNS may enable numerical modeling of environmental flow processes associated with fractal geometries using affordable computational resolution.     

板料成形过程系统分析

此文从系统的角度就板料性能、板料毛坯的展开计算、模具设计与制造、摩擦与润滑、应力应变分析等诸多方面对板料成形过程作了一般分析.可知板料成形过程是一复杂的,需要考虑系统中各个因素之间的相互关系和影响才能得到合理的板料成形件.并从有限元法的角度,建立了板料成形过程模型.     

Environmental impacts of a large-scale incinerator with mixed MSW of high water content from a LCA perspective

Large-scale incinerators are applied widely as a result of the heavy burden of municipal solid waste(MSW) generated, while strong opposition is arising from the public living nearby. A large-scale working incineration plant of 1500 ton/day was chosen for evaluation using life cycle assessment. It was found that the corresponding human toxicity impacts via soil(HTs), human toxicity impacts via water(HTw) and human toxicity impacts via air(HTa)categories are 0.213, 2.171, and 0.012 personal equivalents(PE), and global warming(GW100)and nutrient enrichment(NE) impacts are 0.002 and 0.001 PE per ton of waste burned for this plant. Heavy metals in flue gas, such as Hg and Pb, are the two dominant contributors to the toxicity impact categories, and energy recovery could reduce the GW100 and NE greatly. The corresponding HTs, HTw and HTa decrease to 0.087, 0.911 and 0.008 PE, and GW100 turns into savings of- 0.007 PE due to the increase of the heating value from 3935 to5811 k J/kg, if a trommel screener of 40 mm mesh size is used to pre-separate MSW. MSW sorting and the reduction of water content by physical pressure might be two promising pre-treatment methods to improve the combustion performance, and the application of stricter standards for leachate discharge and the flue gas purification process are two critical factors for improvement of the environmental profile identified in this work.     

The development of a microscale strain measurement system applied to sheet bulge hydroforming

Micro and multiscale sheet metal forming processes represent new and attractive solutions to many manufacturing problems. However, evaluating the strains in these products is a difficult endeavor. Larger organizations are utilizing commercially available microscale digital image correlation systems to measure the strains in microscale parts or on macroscale parts with critical microscale features. The cost of these strain measurement systems is preventing smaller research and development organizations from entering this challenging area or they are forgoing the ability to determine strains. The present paper describes the development of a method for creating microscale grids and measuring strains on microscale parts or microscale locations on larger parts. The method developed was able to measure true strains up to 0.618 for square grids that are 127 μm measured from center-to-center. Microscale strains resulting from sheet bulge hydroforming experiments using 11 mm, 5 mm, and 1 mm diameter dies were evaluated and material properties of the sheet metal were estimated based upon the strains measured in conjunction with FEA simulations and compared to analytical solutions and microscale tension tests. The material properties determined using the strains and FEM approach were consistent with the other methods.     

如何搞好国有大中型亏损企业的环境保护工作

本文揭示了目前在国有大中型亏损企业中开展环境保护工作的困难与问题，指出这是关系到实现我国中目标的重大课题，并提出了一系列搞好国有大中型亏 企业环境工作的对策和措施，希望能引起社会各界特别是国有大中型企业领导们的重视。     

一株有脱硫性能细菌的分离与特性研究

报道了从含硫土壤中分离到的一株无机化能自养型的脱氮硫杆菌(Thiobacillus denitrificans)菌株L_1。该菌细胞呈球杆状,0.3～0.5μm×1.0～1.5μm,单根极生鞭毛运动,革兰氏染色阴性。可利用硫代硫酸盐、硫酸盐作为能源,在细胞内、外储存硫粒,在好气或厌气条件下能以硝酸盐为氮源,最适生长pH6.0。在约1％接种量时,该菌7d可使硫代硫酸盐和硫酸盐的脱硫率,分别达到34.37％和19.79％。     

In-field radon measurement in water: a novel approach

This paper presents a novel approach of measuring radon in-water in the field by inserting a MEDUSA gamma-ray detector into a 210 L or 1000 L container. The experimental measurements include investigating the effect of ambient background gamma-rays on in-field radon measurement, calibrating the detector efficiency using several amounts of KCl salt dissolved in tap water, and measuring radon in borehole water. The results showed that there is fairly good agreement between the field and laboratory measurements of radon in water, based on measurements with Marinelli beakers on a HPGe detector. The MDA of the method is 0.5 Bq L⁻¹ radon in-water.     

Fog as a Fresh-Water Resource: Overview and Perspectives

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m⁻² of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.     

Including Riparian Vegetation in the Definition of Morphologic Reference Conditions for Large Rivers: A Case Study for Europe’s Western Plains

Methods for defining and retrieving reference conditions for large rivers were explored with emphasis on hydromorphologic and biologic quality indicators. For a set of four large rivers in the European Western Plains ecoregion, i.e., the rivers Meuse, Loire, Allier, and Dordogne, reference reaches were selected based on geomorphologic characteristics. A survey of riparian land use, vegetation, and bed geometry was done for the selected reaches. Responses of the riparian landscape to hydromorphologic conditions were determined with a set of existing and newly developed measures of riparian dynamics and forest development. Strong correlations were observed at the reach and local levels between the ratios of width to depth and embankment and the developed measures of riparian dynamics and forest. Boundary conditions for riparian forest development were determined for the hydromorphologic and biologic indicators of riparian dynamics and vegetation structure. These conditions also proved useful for determining the presence of sustainable populations of Populus nigra and Salix purpurea. From this agreement between abiotic and biotic boundary conditions, a set of useful reference conditions was determined, and a framework for the definition of reference and good status conditions subsequently evolved. Finally, a proposal for assessment and monitoring the proposed indicators is discussed for its applicability.     

Rehabilitating Agricultural Streams in Australia with Wood: A Review

Worldwide, the ecological condition of streams and rivers has been impaired by agricultural practices such as broadscale modification of catchments, high nutrient and sediment inputs, loss of riparian vegetation, and altered hydrology. Typical responses include channel incision, excessive sedimentation, declining water quality, and loss of in-stream habitat complexity and biodiversity. We review these impacts, focusing on the potential benefits and limitations of wood reintroduction as a transitional rehabilitation technique in these agricultural landscapes using Australian examples. In streams, wood plays key roles in shaping velocity and sedimentation profiles, forming pools, and strengthening banks. In the simplified channels typical of many agricultural streams, wood provides habitat for fauna, substrate for biofilms, and refuge from predators and flow extremes, and enhances in-stream diversity of fish and macroinvertebrates.Most previous restoration studies involving wood reintroduction have been in forested landscapes, but some results might be extrapolated to agricultural streams. In these studies, wood enhanced diversity of fish and macroinvertebrates, increased storage of organic material and sediment, and improved bed and bank stability. Failure to meet restoration objectives appeared most likely where channel incision was severe and in highly degraded environments. Methods for wood reintroduction have logistical advantages over many other restoration techniques, being relatively low cost and low maintenance. Wood reintroduction is a viable transitional restoration technique for agricultural landscapes likely to rapidly improve stream condition if sources of colonists are viable and water quality is suitable.