自动变光焊接滤光片关键性能指标研究

焊接防护对作业者的职业健康安全及产品质量至关重要,自动焊接防护产品随技术进步开始得到广泛应用,关键器件为自动变光焊接滤光片,衡量其防护性能的关键技术指标为响应时间。本文对自动变光焊接滤光片的防护原理,关键技术指标——响应时间,影响响应时间的因素进行了研究。     

分光光度计测量遮光号方法的研究——自动变光焊接滤光镜遮光号的测量

本文对自动变光焊接滤光镜的遮光号测量方法进行了研究,指出测量中要将分光光度计光源的偏振性与自动变光焊接滤光镜的偏振性结合考虑,并采用合理的方法、步骤及相应的数据处理程序。得到正确的测量结果,同时分析了分光光度计在自动变光焊接滤光镜多项指标测量中的局限性和重要作用。     

Ground-Cover Measurements: Assessing Correlation Among Aerial and Ground-Based Methods

Wyoming’s Green Mountain Common Allotment is public land providing livestock forage, wildlife habitat, and unfenced solitude, amid other ecological services. It is also the center of ongoing debate over USDI Bureau of Land Management’s (BLM) adjudication of land uses. Monitoring resource use is a BLM responsibility, but conventional monitoring is inadequate for the vast areas encompassed in this and other public-land units. New monitoring methods are needed that will reduce monitoring costs. An understanding of data-set relationships among old and new methods is also needed. This study compared two conventional methods with two remote sensing methods using images captured from two meters and 100 meters above ground level from a camera stand (a ground, image-based method) and a light airplane (an aerial, image-based method). Image analysis used SamplePoint or VegMeasure software. Aerial methods allowed for increased sampling intensity at low cost relative to the time and travel required by ground methods. Costs to acquire the aerial imagery and measure ground cover on 162 aerial samples representing 9000 ha were less than $3000. The four highest correlations among data sets for bare ground—the ground-cover characteristic yielding the highest correlations (r)—ranged from 0.76 to 0.85 and included ground with ground, ground with aerial, and aerial with aerial data-set associations. We conclude that our aerial surveys are a cost-effective monitoring method, that ground with aerial data-set correlations can be equal to, or greater than those among ground-based data sets, and that bare ground should continue to be investigated and tested for use as a key indicator of rangeland health.     

双金属衬里复合管堆焊及对接焊有限元力学分析*

为研究双金属衬里复合管堆焊及对接焊焊接后焊接处应力变化,针对Φ89(8+2) mm尺寸衬里复合管,基于热-力耦合理论,建立瞬态热-固耦合管端堆焊与对接焊V型槽环焊缝轴对称力学模型。探讨衬里复合管堆焊及对接焊过程中整个焊肉及热影响区的应力变化并对应力区进行完整、详细分析。结果表明:衬里复合管焊接完成后焊区产生较高的残余应力,最高达463.47 MPa;热处理工艺消除了90%的残余应力,然而投入使用的复合管仍然存在3个高应力区:对接焊焊肉内、过渡区中靠近对接焊焊肉的基管上及2次堆焊起始点,其中应力最大的位置在2次堆焊的起始点,最高达46.63 MPa。建立的模型和计算结果可为实际工况下衬里复合管焊接部位的力学性质研究提供参考。     

焊接污染及其防治措施的研究进展

分析了焊接污染产生特点和危害,针对焊接污染,从物理、化学污染防治两方面,提出了焊接污染的控制措施。     

危险点分析预控理论在锅炉设备中的应用

危险点分析预控理论,是电力职工从反事故的实践中摸索出来的新方法.将其应用于火力发电厂的安全工作中,使电厂工作人员通过分析危险而认识危险.分别对锅炉运行中的锅炉制粉系统和锅炉检修中的焊接作业进行危险点分析,提出了控制措施.     

基于光谱技术的土壤多参数快速检测进展与展望

传统的土壤采样和实验室分析方法往往工作量大、前处理复杂、测定周期长、时效差、费用高,因此,迫切需要寻找快速、准确的土壤多参数检测方法,以实现多尺度土壤属性数据的快速获取与更新。系统梳理了便携式X射线荧光光谱(PXRF)、可见光-近红外反射光谱(Vis-NIR)、激光诱导击穿光谱(LIBS)和电弧发射光谱(AES)等光谱技术的原理、特点以及在土壤多参数快速检测中的应用及其研究进展。提出,未来在提高现有土壤多参数光谱检测精度和适用性的基础上,应结合ICP-MS等传统实验室方法,综合应用多种光谱技术以及化学计量学、现代信息技术和空间分析技术等,实现区域多种土壤属性的快速获取与实时监测,以满足我国当前土壤多参数、高精度快速检测及土壤质量精细化管理的需要。     

Eco-friendly aspects associated with friction welding of tube-to-tube plate using an external tool process

The competitiveness among the manufacturers has been forcing the manufacturing processes to be eco-friendly so as to deliver products with lesser impact on the environment, energy demand and other resources consumption. In this regard, this article presents the unique environmentally friendlier aspects associated with an innovative welding process namely friction welding of tube-to-tube plate using an external tool (FWTPET). This process is capable of generating robust weld joints with lesser energy consumption. A comparative analysis of FWTPET with conventional tungsten inert gas welding process has been narrated.     

Transforming submerged-arc welding slags into magnetic glass-ceramics

Submerged-arc welding slag (SAWS) and rice husk (RH) wastes represent two particularly abundant metallurgical and agricultural wastes. This work focusses on the feasibility of SAWS, together with glass cullet and RHs, to develop lightweight porous glass–ceramics that could be useful for technical purposes. Effects of temperatures and amounts of RHs on the porosity and water absorption of porous glass–ceramics were discussed at various dosages of husks up to 20 wt%. Depending on the sintering temperature, XRD measurements confirmed the presence of more than two crystalline phases: diopside, jacobsite, MgAl₂O₄, Ca_1.82Al_3.64Si_0.36O₈ and pyrope. These samples exhibited magnetic properties which were related to the presence of jacobsite phase. Magnetization curve is a characteristic of soft ferromagnetic materials with magnetization saturating at ~0.82 emu/g. The present results show a promising way to treat submerged-arc welding slags, transforming it into useful porous and functional glass–ceramic products via a simple powder technology and sintering approach.     

圆柱形容器环缝错边的安全性评价

环焊缝就是一锥形环,可以建立其数学模型,进而证明了焊缝错边缺陷是可以修复的。通过应力计算分析和实验验证可以得出:当b/s较小(b/s<0.2)时,错边可以用磨削方法进行修复;当b/s较大时,可用堆焊方法进行修复,且堆焊宽度H不超过100mm。同时,在控制应力水平不超过1.5[σ]时,错边量和角变形量的和可以允许在不超过0.7s的范围内。研究及安全性评价表明ASME,GB150等标准对环焊缝的控制过于严格,也给压力容器制造企业增加了成本。因此,建议GB150放宽对B类焊缝错边量的控制要求。