焊接作业厂房烟尘扩散规律研究与响应面分析

为研究焊接烟尘在多因素耦合作用下的扩散规律，通过在某小型焊接车间进行实验，将不同温度、湿度、风速3种影响因素进行耦合分析，测定不同环境条件下焊接车间内的烟尘浓度。采用Design Expert软件进行Box Behnken实验设计，构建电焊焊接烟尘浓度在3因素3水平条件下的二次回归响应曲面模型，通过研究二次模型实验因素间交互作用，了解二次项对烟尘浓度影响因素的排序，并简要分析电焊烟尘的治理措施。研究结果表明:温度、湿度、风速3个因素均为显著影响；二次项显示因素影响RhV（相对湿度与风速）>TRh（环境温度与相对湿度）>TV（环境温度与风速）。     

3D可视化石化装置安全管理系统的开发

本文介绍了3D可视化石化装置安全管理系统构成、功能和实验途径，该系统将三维激光扫描和GIS技术运用于石化行业，通过数据处理建立石化装置测绘级精度、全尺寸、全真实体的三维数字模型，并通过添加GIS信息和设备属性信息，实现石化装置5D可视化管理、分层管理、设备检维修和施工改造模拟、事故影响范围及应急救援最佳路径模拟、工作人员仿真培训等安全管理模块，为石化企业设备管理提供了新的技术平台。     

Experimental Investigation on the Removal of Toner Particles from Laser-Printed Office Waste Papers

Abstract

In this work the deinking process was simulated in a small high speed blender of about 2 L capacity. The effects of polyethylene (PE) and wax-coated PE on the removal of toner particles in the pulper slurry has been experimentally investigated. The effect of one commercial surfactant (30% anionic, 5% nonionic) on the toner release efficiency was also studied. The average area of toner particles retained on filter papers were determined using an image analysis system that consists of a high-resolution video camera mounted on an optical polarizing microscope, an image software processor, a Pentium PC, and a high-resolution image monitor. The effect of low density PE on toner detachment from laser-printed standard paper was investigated over a concentration range of 0 –200% PE (relative to paper mass). It is found that PE has a certain capabilty of removing (adsorbing) toner particles. In the second phase of this research work, the effect of wax-coated PE was investigated. It was found that wax-coated PE enhances the removal of toner particles beyond that obtained using only PE. Finally, the effect of a commercial surfactant on the release of toner particles have been investigated over a range of surfactant mass percentage (relative to the paper mass).     

Simultaneous measurement of tool torque,traverse force and axial force in friction stir welding

Simultaneous measurement of the tool torque, traverse force and axial force during friction stir welding process is of great significance to the understanding of the underlying process mechanism and the optimizing of the process parameters. Different from the traditional measurement methods using load cell or rotating component dynamometer, an indirect but economical methodology is used in this study for the simultaneous measurement of the traverse force, axial force and tool torque by monitoring the output torques of the servo motors and main spindle three-phase AC induction motor inside the FSW machine. The values of the traverse force, axial force and tool torque are determined under different welding conditions, and the influencing factors are examined. The measured results in friction stir welding of AA2024-T4 aluminum alloys at different combinations of tool rotation speed and welding speed lay foundation for process optimization.     

双金属冷压焊固相结合强度的分析和计算

分析了表面状态及金属性能对双金属冷压焊结合强度的影响 ,运用金属 金属界面结合力的计算方法 ,对冷压焊固相结合强度进行了分析和研究     

Accumulation, transportation, and distribution of tetracycline and cadmium in rice

Co-exposure to heavy metal and antibiotic pollution might result in complexation and synergistic interactions, affecting rice growth and further exacerbating pollutant enrichment. Therefore, our study sought to clarify the influence of different Tetracycline (TC) and Cadmium(Cd) concentration ratios (both alone and combined) on rice growth, pollutant accumulation, and transportation during the tillering stage in hydroponic system. Surprisingly, our findings indicated that the interaction between TC and Cd could alleviate the toxic effects of TC/Cd on aerial rice structures and decrease pollutant burdens during root elongation. In contrast, TC and Cd synergistically promoted the accumulation of TC/Cd in rice roots. However, their interaction increased the accumulation of TC in roots while decreasing the accumulation of Cd when the toxicant doses increased. The strong affinity of rice to Cd promoted its upward transport from the roots, whereas the toxic effects of TC reduced TC transport. Therefore, the combined toxicity of the two pollutants inhibited their upward transport. Additionally, a low concentration of TC promoted the accumulation of Cd in rice mainly in the root tip. Furthermore, a certain dose of TC promoted the upward migration of Cd from the root tip. Laser ablation-inductively coupled plasma mass spectrometry demonstrated that Cd mainly accumulated in the epidermis and stele of the root, whereas Fe mainly accumulated in the epidermis, which inhibited the absorption and accumulation of Cd by the rice roots through the generation of a Fe plaque. Our findings thus provide insights into the effects of TC and Cd co-exposure on rice growth.     

焊接残余应力数值模拟的研究与发展

分析了用有限元法计算焊接残余应力的基本理论,其中包括温度场和应力场的数值模拟,介绍了焊接残余应力数值模拟方法的近期研究成果,并探讨了焊接残余应力数值模拟技术的发展趋势。     

激光光散射在混凝研究中的应用评述

混凝研究的理论与实践近三十年来得到长足的发展，很大的原因在于现代检测技术与手段的大力运用，激光光散射为其中得力的方法之一。本文对其基本操作原理作了简要介绍，并对测定过程中存在的若干问题作了探讨。然后就其在混凝领域中诸层次的研究现状与发展趋势进行了若干概括。本文试图阐明其应用于混凝领域的研究所具有的巨大潜力及困难与局限所在，以期将来更大的进展     

Size distributions of manure particles released under simulated rainfall

Manure and animal waste deposited on cropland and grazing lands serve as a source of microorganisms, some of which may be pathogenic. These microorganisms are released along with particles of dissolved manure during rainfall events. Relatively little if anything is known about the amounts and sizes of manure particles released during rainfall, that subsequently may serve as carriers, abode, and nutritional source for microorganisms. The objective of this work was to obtain and present the first experimental data on sizes of bovine manure particles released to runoff during simulated rainfall and leached through soil during subsequent infiltration. Experiments were conducted using 200 cm long boxes containing turfgrass soil sod; the boxes were designed so that rates of manure dissolution and subsequent infiltration and runoff could be monitored independently. Dairy manure was applied on the upper portion of boxes. Simulated rainfall (ca. 32.4 mm h(-1)) was applied for 90 min on boxes with stands of either live or dead grass. Electrical conductivity, turbidity, and particle size distributions obtained from laser diffractometry were determined in manure runoff and soil leachate samples. Turbidity of leachates and manure runoff samples decreased exponentially. Turbidity of manure runoff samples was on average 20% less than turbidity of soil leachate samples. Turbidity of leachate samples from boxes with dead grass was on average 30% less than from boxes with live grass. Particle size distributions in manure runoff and leachate suspensions remained remarkably stable after 15 min of runoff initiation, although the turbidity continued to decrease. Particles had the median diameter of 3.8 microm, and 90% of particles were between 0.6 and 17.8 microm. The particle size distributions were not affected by the grass status. Because manure particles are known to affect transport and retention of microbial pathogens in soil, more information needs to be collected about the concurrent release of pathogens and manure particles during rainfall events.     

不同烟气含湿量测量方法比较与分析

探讨准确测量烟气含湿量的方法,采用干湿球法、重量法、阻容法、激光法同步比对测量典型温湿度污染源烟气的含湿量,通过监测结果分析,提出了不同测量方法在实际烟气测量中的准确性和适用性,为准确、规范测定烟气含湿量提供技术依据。