制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

某铅锌尾矿库周边地下水污染特征与评价

通过对西南某铅锌矿尾矿库周围地下水土壤重金属元素含量的测定,研究、评价该尾矿库及其周围的浅层和深层地下水重金属污染、迁移特征及规律,为该类尾矿库工程设计、地下水预防和防治提供科学依据。结果表明：尾矿库下游的浅层地下水的铅和锌超标,尾矿库上游浅层地下水和尾矿库南、东和西的深层岩溶水各重金属物均达到《地下水质量标准》（GB／T14848—93）III类标准要求。尾矿库周围浅层地下水铅、锌、砷等重金属浓度比同一位置的深层地下水的高。     

涉铅企业环境风险辨识技术研究

从涉铅企业生产工艺及物料特征出发,以《建设项目环境风险评价技术导则》、《环境污染事故应急预案编制技术指南》和《重金属污染企业突发环境事件应急预案编制指南》等技术规范为依据,对涉铅企业环境风险源项及突发环境风险事故类型进行辨识、归纳和归类,为涉铅企业的环境风险评价和环境应急管理提供科学依据。     

铅酸蓄电池生命周期评价

铅酸蓄电池是世界上产量最大、用途最广的一种二次电池。铅酸蓄电池生命周期过程中每一个环节都有可能对环境带来不利影响,评估从生产到废弃处理关键过程中对环境的影响,可以为制定有效的管理政策提供科研支撑。目前,尚缺乏针对我国特色的铅酸蓄电池行业全生命周期评价的研究,造成此行业的污染防治无据可依。因此,本研究针对铅酸蓄电池的生命周期进行评价,通过设定研究目的与范围、收集数据与分析清单、获得影响评价和解释结果,研究了铅酸蓄电池对环境的影响,结果表明铅酸蓄电池在生产环节的板栅浇铸过程和废弃处理环节的脱硫过程应属于管理中着重控制的部分。     

电动交通工具的污染减排及对策

燃油交通工具是城市温室气体的重要来源之一,因此使用电动交通工具成为解决城市污染减排的重要措施.文章就正确认识电动交通工具污染减排的作用,蓄电池的生产管理、回收利用等进行了讨论,并提出了相应的对策和建议.     

胡敏酸改性膨润土钝化污染土壤Pb&Cd及机理

通过盆栽试验,探讨了胡敏酸改性膨润土对重金属铅、镉污染土壤的钝化效果及机理。结果表明,铅、镉污染土壤中施加胡敏酸改性膨润土能显著降低小白菜中Pb、Cd的含量,在添加Cd(3 mg/kg)/Pb(250 mg/kg)污染土壤和Cd(1 0 mg/kg)/Pb(5 00 mg/kg)污染土壤上小白菜地上部分Pb含量分别比对照降低19.08%和47.91%,Cd含量分别比对照降低9.79%和14.89%。土壤本身对添加的重金属Pb/Cd有一定的耐受力和自我净化能力,在添加重金属后,添加的Pb/Cd元素大部分直接转化为较为稳定的碳酸盐结合态和铁锰氧化结合态。相关性分析显示小白菜的鲜重与小白菜Pb/Cd含量极显著负相关,进一步说明胡敏酸改性膨润土是通过提高小白菜的生物量,从而降低Pb/Cd在小白菜中的含量。     

锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

Northern Idaho House Dust and Soil Lead Levels Compared to the Bunker Hill Superfund Site

House dust has been identified as a major exposure medium for lead (Pb) in children. High levels of Pb in soil and house dust have been recorded at the Bunker Hill Superfund Site (BHSS) in northern Idaho, an historic mining and smelting district. Soil and dust remediation at the site was required; however, regional background soil and dust Pb levels had not been well characterized. The objective of this survey was to determine background house dust Pb levels and to compare those levels with concentrations, and dust and Pb loading rates measured at the BHSS. Soil and house dust samples were collected in five towns demographically similar to the BHSS but unaffected by the mining industry. The background concentrations and loading rates were significantly lower than those observed at the site. House age was a significant factor affecting background soil and house dust Pb concentrations and loading rates.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

An efficient technology to treat heavy metal--lead--contaminated soil by microwave radiation

Microwave (MW) technology can be used to vitrify contaminated soil wastes and immobilize heavy metal ions in soils. More than 93% of the Pb(II)-contaminated soil was vitrified to a glass/ceramic formation after 30 min of MW radiation. In a 6-year study, the Pb(II) concentration of the vitrified soil in the leaching test was less than 1.0 mg/l, which is substantially below the USEPA regulatory limit of 5.0 mg/l.