Organic residue decomposition: The minicontainer-system a multifunctional tool in decomposition studies

The Minicontainer-test, first described by Eisenbeis (1993), was designed to study the kinetics of organic residue decomposition at a microsite level. It is derived from the litterbag technique and consists of polyethylene minicontainers (volume about 1.5 cm³) filled with a test substrate (litter, straw, cellulose, etc.). The minicontainers (MCs) are closed at either end with plastic gauze discs of variable mesh size (e.g. 20 μm, 250 μm, 500 μm or 2 mm). A definite number of such units are inserted into PVC-bars, which can be implanted into the soil horizontally or vertically, or be exposed on the soil surface horizontally. The bars are very stable and can be exposed in different environments for months to years. If required, the bars can be removed temporarily and stored, e.g. during soil cultivation. Should fresh litter be used, two phases of decomposition can be distinguished: a fast initial phase, which can be mainly related to the effect of leaching, and a second slow phase depending mainly on the activity of soil organisms and litter quality. Several questions can be addressed to investigations using MCs, e.g. 1) parts of the soil fauna which are involved in decomposition (nematodes, microarthropods, and smaller specimens of the macrofauna, e.g. enchytraeidae, diplopods and dipteran larvae) can be extracted from the litter substrate using a miniscale high gradient extractor, 2) the organic mass loss of litter can be determined, 3) microbial biomass (C_mic, N_mic) can be assessed by fumigation extraction and 4) microbial activity (respiration) in the test substrate can also be assessed by use of standardised methods. Compared to litterbag studies, the larger number of small replicate units improves the statistical evaluation. Until today the Minicontainer-test has been applied in forestry and agriculture, e.g. studying the effects of liming, soil restoration and the application of insecticides, e.g. Diflubenzuron (Dimilin) and Btk (Bacillus thuringiensis var.kurstaki).     

Integrated catalytic wet air oxidation and aerobic biological treatment in a municipal WWTP of a high-strength o-cresol wastewater

This study examines the feasibility of coupling a Catalytic Wet Air Oxidation (CWAO), with activated carbon (AC) as catalyst, and an aerobic biological treatment to treat a high-strength o-cresol wastewater. Two goals are pursued: (a) To determine the effect of the main AC/CWAO intermediates on the activated sludge of a municipal WasteWater Treatment Plant (WWTP) and (b) To demonstrate the feasibility of coupling the AC/CWAO effluent as a part of the influent of a municipal WWTP. In a previous study, a high-strength o-cresol wastewater was treated by AC/CWAO aiming to establish the distribution of intermediates and the biodegradability enhancement. In this work, the biodegradability, toxicity and inhibition of the most relevant intermediates detected in the AC/CWAO effluent were determined by respirometry. Also, the results of a pilot scale municipal WWTP study for an integrated AC/CWAO-aerobic biological treatment of this effluent are presented. The biodegradation parameters (i.e. maximum oxygen uptake rate and oxygen consumption) of main AC/CWAO intermediates allowed the classification of the intermediates into readily biodegradable, inert or toxic/inhibitory compounds. This detailed study, allowed to understand the biodegradability enhancement exhibited by an AC/CWAO effluent and to achieve a successful strategy for coupling the AC/CWAO step with an aerobic biological treatment for a high-strength o-cresol wastewater. Using 30%, as COD, of AC/CWAO effluent in the inlet to the pilot scale WWTP, the integrated AC/CWAO-biological treatment achieved a 98% of total COD removal and, particularly, a 91% of AC/CWAO effluent COD removal without any undesirable effect on the biomass.     

Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.

     

Genotoxicity detected in wild mice living in a highly polluted wetland area in south western Spain

A field study was carried out in the south of the Iberian Peninsula in an industrial area in the neighbourhood of Huelva city, SW Spain, and in a natural area (Do?ana National Park) for comparison, to estimate the genetic risk induced by environmental pollution in wild mice. Genotoxic effects in a sentinel organism, the Algerian mice (Mus spretus) free living in the industrial area were compared with animals of the same species living in the natural protected area. The single cell gel electrophoresis, or Comet assay, was performed as a genotoxicity test in peripheral blood of mice. Our results clearly show that mice free living in the contaminated area bear a high burden of genetic damage as compared with control individuals. The results suggest that the assessing of genotoxicity levels by the Comet assay in wild mice can be used as a valuable test in pollution monitoring and environmental conservation.     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

铁路车站X射线行李包检查系统放射防护情况调查

为调查铁路车站X射线行李包检查系统放射防护水平,2017年至2019年对6个铁路车站3种型号检测系统的行李包入口和出口,系统上盖板、左侧、右侧5个位置的空气比释动能率进行620台次检测.结果显示,620台次检测的空气比释动能率检查结果均合格,不同型号、不同检测位置空气比释动能率有统计学差异,其中C型5个检测位置的空气比...     

空中交通管制中人的可靠性模糊综合评价研究

人是空中交通管制系统中最灵活、最具适应性和最有价值的因素 ,而其行为也是最易受到不利影响的。由于空中交通管制中产生的人为失误 ,往往会导致航空器空中危险接近 ,严重的后果甚至会酿成空难。笔者从人 -机 -环境系统工程的观点出发 ,提出了空中交通管制中人的可靠性评价的指标体系结构模型。从人自身因素、软件、硬件、环境等方面指出了影响空中交通管制中人的可靠性的心理、空中环境等 17个子因素。运用模糊数学的方法 ,建立空中交通管制中人的可靠性定量评价模型 ,并用实例进行了验证。研究表明 ,该方法应用于空中交通管制中人的可靠性评价是一种新的尝试 ,其评价结果可为各级领导机构提供航空安全管理的决策依据。     

空调车间的通风除尘设计

针对空调车间的通风除尘,阐述了确定系统风量的方法。     

空气污染天气过程与气象要素之间的关联性分析

随着经济和社会的不断发展,地球的环境正在遭受着严重的侵害,关于环境的问题也日益显现出来,比如全球变暖、雾霾等现象。本文分析了空气污染的因素、气象要素对空气质量的影响,并提出了防治空气污染的对策。     

Misoperation monitoring and early warning during startup and shutdown of petrochemical units

Most petrochemical units run under extreme conditions, such as high temperatures, pressures, and speeds. Consequently, the equipment operators may commit errors because the startup and shutdown processes usually involve complicated operation steps; moreover, the operators may lack experience in handling abnormal situations. Misoperation can lead to accidents, including fires and explosions. Thus, risk analysis for process operations and the development of preventive measures have become an effective means of avoiding misoperation-related accidents. However, it is challenging to ensure the comprehensiveness of risk-analysis results. In this paper, we present a method for misoperation monitoring and early warning in the startup and shutdown processes of petrochemical units. The mechanisms of misoperation occurrence are summarized based on investigations of serious accidents in the recent past. Knowledge regarding the mechanisms of misoperation is crucial for the risk analysis of petrochemical units. The potential risk information, such as causes, adverse consequences, key monitoring parameters, and prevention control solutions, should be acquired and be employed to construct an early-warning knowledge database. Furthermore, misoperation judgment rules need to be formulated to identify misoperations. The data obtained from the monitoring module, misoperation judgment rules, and analysis results can aid in developing schemes to avoid possible abnormal situations. This paper reports a misoperation monitoring and early-warning system for a hydrogenation unit. As demonstrated, conducting risk analysis to determine the potential operational risks and formulating misoperation judgment rules to analyze the process data are essential for enabling early warning. The application of this method will contribute to operational guidance, economic loss reduction, and accident avoidance.