中国法规大气扩散模式及其与其他模式的比较

介绍了中国法规性大气扩散模式(CRADM),分析了CRADM和西方一些模式(如HPDM,AMS)的差别。采用同样条件作为输入,比较并讨论了CRADM,HPDM和AMS在各方面的性能差异。分析了中国大气扩散模式在环境影响评价应用中出现的一些问题,提出了改进建议。特别地,研究表明中性条件下Briggs烟气抬升公式对实际抬升有过高估计,原因是没有考虑环境湍流对烟羽的累积作用      

Impact of Fly Ash from Coal-Fired Power Stations in Delhi, with Particular Reference to Metal Contamination

Indraprastha Power Station (IPP Stn) and Rajghat Power House (RPH), owned by Delhi Electric Supply Undertaking, are both coal-fired power stations located on Ring Road in New Delhi. Ash content of the coal used ranges between 38–47%. The ash is collected in electrostatic precipitators which have an efficiency of 99.3% (IPP station), and 99.7% (RPH). There are instances of major dust pollution around the power stations from fly ash dispersal. The main method of disposal of fly ash from the power stations is by mixing with water, the resultant slurry is pumped through pipes to ash disposal ponds. The supernatant from these ponds is discharged into River Yamuna. Field studies have revealed large quantities of fly ash being deposited into the river. Local populations of Eichhornia crassipes have reduced dramatically between 1987–1995, with a marked reduction in the year 1994–1995. Field studies, conducted in January, 1995 have investigated the impact of fly ash dispersal in the Delhi region with particular reference to metal contamination. Elemental concentrations for a range of elements are determined by ICP-AES in fly ash and top soils along four transects from the power stations up to a distance of 8 km. The effects of fly ash leachates from the ash settling ponds on the river are determined by analyzing river overbank soils and vegetation for their elemental contents. It is concluded that fly ash dispersal from the stacks are a source of alkali, alkaline-earth and to some extent heavy metals in soils in the vicinity of the power stations, and enrichment of elements in river overbank soils are a result of discharge of fly ash leachates from ash disposal ponds. However, the impact from both these sources of metal contamination is not large enough to give cause for concern. Marked reduction in populations of Eichhornia crassipes downstream of the river where it receives leachates from the ash disposal ponds are attributed to turbidity of the ash pond leachates and metal toxicity. Elemental enrichment in the floodplain soils, as a result of fly ash particle deposition during monsoons, may enhance the horticultural value of these soils as is shown by a healthy cultivated crop of Brassica juncea.     

生态安全指标体系的建立与应用

在背景调研、生态环境评价及生态功能区划的基础上 ,应用科学发展观理念 ,在剖析各类自然生态系统的条件下提出了生态安全内涵 ,根据内涵研究了指标体系框架。并以绕阳河平原农业生态区为例探析了生态安全指标体系。同时研究了生态安全指标体系在生态安全评估和生态环境影响评价中的应用。     

基于信息相对重要性的主成分法优选环境测点

提出将单项污染物测值反映的信息量表示为相对重要性和将单项污染物的相对重要性综合为多项污染物的综合相对重要性的计算公式。根据测点信息的综合相对重要性,再用主成分子集合选择法优化选点。该方法不仅减少了计算量,也易于确定多项污染物的综合优化点。该方法用于贵阳市大气环境测点优选出的测点能反映该市的环境质量。      

Multilevel air quality evolution in Shenyang: Impact of elevated point emission reduction

Visibility observed at different altitudes is favorable to understand the causes of air pollution. We conducted 4-years of observations of visibility at 2.8 and 60 m and particulate matter(PM) concentrations from 2015 to 2018 in Shenyang, a provincial city in Northeast China. The results indicated that visibility increased with the increasing height in winter(especially at night), and decreased with height in summer(especially at the daytime). PM concentration exhibited opposite vertical variati...     

涂层大气腐蚀的模糊综合评定

此文将模糊理论应用于涂层的大气腐蚀试验,针对对比性腐蚀试验结果,提出了涂层保护性能大气腐蚀模糊综合评定方法。本法具有简捷、迅速、准确等优点。     

Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.     

Key features of new particle formation events at background sites in China and their influence on cloud condensation nuclei

New particle formation (NPF) event at multi rural sites in China Identifying the characteristics of NPF event Comparing NPF event between clean and polluted conditions Quantifying contribution to the cloud condensation nuclei Implication of climate and air quality Long-term continuous measurements of particle number size distributions with mobility diameter sizes ranging from 3 to 800 nm were performed to study new particle formation (NPF) events at Shangdianzi (SDZ), Mt. Tai (TS), and Lin’an (LAN) stations representing the background atmospheric conditions in the North China Plain (NCP), Central East China (CEC), and Yangtze River Delta (YRD) regions, respectively. The mean formation rate of 3-nm particles was 6.3, 3.7, and 5.8 cm⁻³·s⁻¹, and the mean particle growth rate was 3.6, 6.0, and 6.2 nm·h⁻¹ at SDZ, TS, and LAN, respectively. The NPF event characteristics at the three sites indicate that there may be a stronger source of low volatile vapors and higher condensational sink of pre-existing particles in the YRD region. The formation rate of NPF events at these sites, as well as the condensation sink, is approximately 10 times higher than some results reported at rural/urban sites in western countries. However, the growth rates appear to be 1–2 times higher. Approximately 12%–17% of all NPF events with nucleated particles grow to a climate-relevant size (>50 nm). These kinds of NPF events were normally observed with higher growth rate than the other NPF cases. Generally, the cloud condensation nuclei (CCN) number concentration can be enhanced by approximately a factor of 2–6 on these event days. The mean value of the enhancement factor is lowest at LAN (2–3) and highest at SDZ (~4). NPF events have also been found to have greater impact on CCN production in China at the regional scale than in the other background sites worldwide.     

Phast validation of discharge and atmospheric dispersion for pressurised carbon dioxide releases

The consequence modelling package Phast examines the progress of a potential incident from the initial release to the far-field dispersion including the modelling of rainout and subsequent vaporisation. The original Phast discharge and dispersion models allow the released substance to occur only in the vapour and liquid phases. The latest versions of Phast include extended models which also allow for the occurrence of fluid to solid transition for carbon dioxide (CO₂) releases.As part of two projects funded by BP and Shell (made publicly available via CO2PIPETRANS JIP), experimental work on CO₂ releases was carried out at the Spadeadam site (UK) by GL Noble Denton. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases (vapour storage). The CO₂ was stored in a vessel with attached pipework. At the end of the pipework a nozzle was attached, where the nozzle diameter was varied.This paper discusses the validation of Phast against the above experiments. The flow rate was predicted accurately by the Phast discharge models (within 10%; considered within the accuracy at which the BP experimental data were measured), and the concentrations were found to be predicted accurately (well within a factor of two) by the Phast dispersion model (UDM). This validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.     

Validation of discharge and atmospheric dispersion for unpressurised and pressurised carbon dioxide releases

This paper discusses the validation of discharge and subsequent atmospheric dispersion for both unpressurised and pressurised carbon dioxide releases using the consequence modelling package Phast.The paper first summarises the validation of the Phast dispersion model (UDM) for unpressurised releases. This includes heavy gas dispersion from either a ground-level line source (McQuaid wind-tunnel experiments) or an area source (Kit-Fox field experiments). For the McQuaid experiments minor modifications of the UDM were made to support line sources. For the Kit Fox experiments steady-state and 20-s finite-duration releases were simulated for both neutral and stable conditions. Most accurate predictions of the concentrations for finite duration releases were obtained using the UDM Finite Duration Correction method.Using experiments funded by BP and Shell and made available via DNV's CO2PIPETRANS JIP, the paper secondly summarises the validation of the Phast discharge and dispersion models for pressurised CO₂ releases. This modelling accounted for the possible presence of the solid CO₂ phase following expansion to atmospheric pressure. These experiments included both high-pressure steady-state and time-varying cold releases (liquid storage) and high-pressure time-varying supercritical hot releases. Both the flow rate and the concentrations were found to be predicted accurately.The above validation was carried out with no fitting whatsoever of the Phast extended discharge and dispersion models.