风险管理在水电工程中的应用

水电工程是一个在建设过程中充满风险的、相当复杂的系统工程,其风险管理伴随着工程建设的全过程.随着我国水电工程建设体制改革的进一步深化,风险管理越来越受到工程界的重视.分析了在水电工程中存在的主要危险有害因素,提出了具体的风险管理和评价方法,并对一些主要的评价方法进行了大致的比较,同时对水电工程的风险管理工作提出了一些改进措施.     

废钢铁切割加工烟尘的治理

介绍了氧-乙炔火焰切割加工废钢铁产生的烟尘治理系统的设计和系统设备选型,重点介绍了烟尘捕集罩的设计和除尘器、电磁脉冲阀、风机的选型和PLC自动控制以及系统实际运行效果,为废钢铁加工企业治理污染提供一套简单、经济、实用的除尘系统作参考.     

电袋复合除尘器的应用研究

针对我国燃煤电厂的除尘现状,指出电袋复合除尘器的技术经济优势.电袋复合除尘器在新建及改扩建电厂的成功应用取得了良好的经济、环境效益,并有广阔的发展前景.其研究重点是静电除尘单元和布袋除尘单元之间的结合.     

金属非金属矿山企业如何推进安全生产标准化考评工作

通过典型企业推进安全标准化考评工作的研究成果,探讨了企业在开展安全标准化考评工作过程中所需遵循的步骤和相关要求,分析了考评工作过程中各阶段需要建设的内容和形式要求,给出了各阶段所需的工作时间.     

化学品危险性鉴别分类研究的现状与展望

从对GHS(化学品分类及标记全球协调制度)化学品危险性鉴别分类的分析出发,归纳和总结了联合国、欧盟、美国以及中国的化学品危险性鉴别分类研究现状;提出化学品危险性鉴别分类是获取化学品安全信息、评估化学品的固有危险性的重要手段;给出化学品危险性鉴别分类试验必须满足OECD(经济合作与发展组织)的各项标准和准则;对化学品危险性鉴别分类的应用前景及未来工作进行评述和展望;指出为化学品安全管理、事故应急救援、事故调查及做好基础数据的积累是今后研究工作的努力方向;提出了借鉴GHS,REACH(化学品注册、评估、许可和限制)等先进化学品安全监管法规,对完善我国的化学品安全监管制度,化学品鉴别分类标准的重要现实意义。     

火焰原子吸收光谱法测定畜禽粪便中铜和锌

采用冻干法-全量酸消解-火焰原子吸收光谱法测定畜禽粪便中铜和锌,优化了试验条件.铜和锌分别在0 mg/L～3.00 mg/L和0 mg/L～1.00 mg/L范围内线性良好,检出限分别为6 mg/kg和2 mg/kg(按取0.5 g试样消解定容至50 mL计算),粪便试样测定的RSD分别为1.3%和3.7%,加标回收率分别为104%和107%.     

加强预警监测体系建设 高效应对突发生态环境问题

简述了区域突发生态环境问题的现状与特点以及环境监测应对突发生态环境问题的现状,指出了环境监测应对突发生态环境污染存在的问题。提出,应加快预警监测技术体系建设,丰富预警监测技术手段,重视生物生态监测在预警监测中的作用,提高环境质量综合评价水平,发挥环境信息系统在预警监测中的作用,加强预警监测技术人才培养。     

建设项目竣工环境保护验收监测应注意的问题

针对建设项目竣工环境保护验收监测中存在的问题,阐述了工况控制、总量监测、环境相容性等环节的技术要求和注意事项,并就与之相关的公众参与、监测人员的素质等问题展开了讨论。     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

湖南林业科技成果市场化的思考

林业科技成果转化为现实生产力,须通过一系列的中介才能发挥作用,尤其是在社会主义市场经济条件下,其中介更主要地表现为市场.如何使湖南林业科技成果市场化,作者认为:加强湖南林业科技推广是实现湖南林业科技成果市场化的重要环节.