气田甲醇污水处理装置的运行优化

针对延长气田采气一厂甲醇污水处理站运行中换热器/精馏塔塔板结垢严重、甲醇回收率低、处理后水水质不达标等问题,采用水质分析、结垢分析与工艺原因分析等方法,分析原因并采取相应措施。结果表明：预处理效果差、精馏塔分离效果差是造成这些问题的主要原因;采用优化预处理药剂加量、优化加药工艺和优化甲醇回收工艺等措施,使甲醇污水处理装置持续稳定运行,提高了甲醇污水预处理效果,降低了换热器/精馏塔塔板结垢程度,提高了甲醇回收率。处理后水水质稳定,含油量、悬浮固体含量、悬浮物粒径中值均达标,可满足平均空气渗透率≤0.01 μm²地层的回注要求。     

缺氧/好氧电化学膜-生物反应器强化脱氮效果及抗污染性能研究

研究了外加电压下电化学A/O-MBR的污染物去除效果和抗污染性能,分析了抗污染性能提高的原因.结果显示,外加2V电压时系统对COD和总氮的平均去除率分别为89.4%、92.2%,不加电压时COD和总氮的去除率分别为87.6%、77.3%,表明外加电压能够显著提高A/O-MBR的脱氮处理效果;研究同时发现,外加2V电压时,导电膜的平均运行周期为38d,相比不加电压时（平均26d）,运行周期有所延长.污染物与导电膜之间的静电排斥作用和H₂O₂的原位清洗作用是系统抗污染性能提升的主要原因.     

有机生活垃圾微生物处理剂的研究

采用了多种培养基 ,对广泛收集的菌种、相关土样进行分离、筛选 ,得到了 8株有效微生物 ,其产生的蛋白酶、脂肪酶、淀粉酶和纤维素酶等酶系可使大分子物质分解成低分子物质 ,微生物摄取这些低分子物质后 ,将其转变成二氧化碳、水和少量氨气并释放能量 ,剩余的少量固体残渣可作为生物肥料。采用以上 8种微生物制成的有机生活垃圾处理剂 ,如配合一定的处理工艺和设备 ,可对日常有机生活垃圾进行减量化和资源化处理。     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

The abatement of major pollutants in air and water by environmental catalysis

This review reports the research progress in the abatement of major pollutants in air and water by environmental catalysis. For air pollution control, the selective catalytic reduction of NO _x (SCR) by ammonia and hydrocarbons on metal oxide and zeolite catalysts are reviewed and discussed, as is the removal of Hg from flue gas by catalysis. The oxidation of Volatile organic compounds (VOCs) by photo- and thermal-catalysis for indoor air quality improvement is reviewed. For wastewater treatment, the catalytic elimination of inorganic and organic pollutants in wastewater is presented. In addition, the mechanism for the procedure of abatement of air and water pollutants by catalysis is discussed in this review. Finally, a research orientation on environment catalysis for the treatment of air pollutants and wastewater is proposed.     

Simple model of sludge thickening process in secondary settlers

In wastewater treatment plants (WWTPs), a secondary settler acts as a clarifier, sludge thickener, and sludge storage tank during peak flows and therefore plays an important role in the performance of the activated sludge process. Sludge thickening occurs in the lower portions of secondary clarifiers during their operation. In this study, by detecting the hindered zone from the complete thickening process of activated sludge, a simple model for the sludge thickening velocity, u _s = aX ^b (a = 0.9925SSVI _3.5, b = 3.541ln(SSVI _3.5)+12.973), describing the potential and performance of activated sludge thickening in the hindered zone was developed. However, sludge thickening in the compression zone was not studied because sludge in the compression zone showed limited thickening. This empirical model was developed using batch settling data obtained from four WWTPs and validated using measured data from a fifth WWTP to better study sludge thickening. To explore different sludge settling and thickening mechanisms, the curves of sludge thickening and sludge settling were compared. Finally, it was found that several factors including temperature, stirring, initial depth, and polymer conditioning can lead to highly concentrated return sludge and biomass in a biologic reactor.     

Territory characteristics and coexistence with heterospecifics in the Dartford warbler <Emphasis Type="Italic">Sylvia undata</Emphasis> across a habitat gradient

The study of successional gradients may help to understand the relative influence of habitat structure and competition on territory characteristics. Here, we evaluate the effects of vegetation cover, conspecific and heterospecific densities, and distance to the nearest neighbor on territory size, shape, and overlap in insectivorous birds. We studied these effects along a gradient of postfire habitat regeneration in which foliage cover and densities of focal species varied several-fold. We delineate 197 territories (minimum convex polygons) of the shrub-dwelling Dartford warbler (Sylvia undata) and 255 of the syntopic Sardinian (Sylvia melanocephala), subalpine (Sylvia cantillans) and melodious (Hippolais polyglotta) warblers at three plots in NE Catalonia (Spain and France) in 1987–2005. After accounting for the effect of the number of locations used to delineate polygons, generalized linear mixed models (GLMM) showed a reduction in territory area of the Dartford warbler as conspecific density increased and distance to nearest neighbor decreased, in accordance with the contender pressure hypothesis for territory size regulation. Heterospecific density was not included in the final model of territory size and the effect of habitat structure was marginal. Territory roundness was positively correlated with its size and with conspecific density, probably in relation to energetic constraints, and negatively with heterospecific density. Territorial exclusion was almost complete among Dartford warblers, whereas interspecific territory overlap was extensive and tended to increase with heterospecific density and with structural diversity along the gradient. Our results support the hypothesis that Mediterranean warbler coexistence derives from ecological segregation and not from interspecific territoriality.     

Particle monitoring techniques for water treatment applications

１　ＩｎｔｒｏｄｕｃｔｉｏｎＰａｒｔｉｃｌｅｓｉｎｎａｔｕｒａｌｗａｔｅｒｓａｒｅｏｆｔｅｎｔｏｏｓｍａｌｌｔｏｂｅｅｆｆｅｃｔｉｖｅｌｙｒｅｍｏｖｅｄｂｙｔｈｅｓｅｓｅｐａｒａｔｉｏｎｔｅｃｈｎｉｑｕｅｓ．Ｔｈｅｐｒｏｃｅｓｓｏｆｃｏａｇｕｌａｔｉｏｎ／ｆｌｏｃｃｕｌａｔｉｏｎｃａｕｓｅｓｆｉｎｅｐａｒｔｉｃｌｅｓｔｏａｇｇｒｅｇａｔｅｉｎｔｏｌａｒｇｅｒｕｎｉｔｓ（ｆｌｏｃｓ）ｗｈｉｃｈｃａｎｂｅｍｏｒｅｅａｓｉｌｙｓｅｐａｒａｔｅｄ．Ｉｎｗａｔｅｒｔｒｅａｔｍｅｎｔｓａｌｔｓｏｆａｌｕｍｉ…     

宏观市场环境对BOT模式投资污水处理行业的影响研究

污水处理BOT投资模式是一种国际流行的公共基础设施建设融资方式。鉴于国内污水处理市场化程度较低、污水处理率及处理效率不高等压力,政府正通过调整行业政策,不断鼓励社会资本以BOT模式进入污水处理行业。污水处理市场前景与商机方面,中国污水处理市场发展空间巨大。市场环境方面,宏观经济发展速度对污水处理行业发展的影响不大;中国各项产业政策均有利于污水处理市场化发展;而且行业综合风险较低。投资收益方面,市政公用设施的性质特点,决定了污水处理行业投资收益率不高但长期稳定。总结来看,宏观市场环境将越来越有利于以BOT模式投资污水处理市场,BOT模式投资是可行的。     

活性炭再生及其在水处理中的应用

活性炭的再生方法有很多,如热再生法、生物再生法、化学溶液再生法、湿式氧化再生法、超临界萃取再生法、电化学再生法、超声波再生法、微波辐照再生法等。不同的方法有不同的特点适用于不同的工业废水处理。