Effect of MoO3 on vanadium based catalysts for the selective catalytic reduction of NOx with NH3 at low temperature

The selective catalytic reduction(SCR) activities of the MoO_3 doped V/WTi catalysts prepared by the incipient wetness impregnation method at low temperature were investigated.The results showed that the addition of MoO_3 could enhance the NO_ xconversion at low temperature and the best SCR activity was obtained when the dosage of MoO_3 reached5 wt.%. The NH3-TPD and DRIFTS experiments indicated that the addition of MoO_3 changed the type and number of acid sites on the surface of catalysts and reaction activities of acid sites were altered at the same time. The redox capacity and amount of active oxygen species got improved for V3Mo5/WTi catalyst, which could be confirmed by the H_2-TPR and transient response experiments. Water vapor inhibited the NO_xconversion at low temperature. Deposition of ammonium sulfate or bisulfate might be main reason for the loss of catalytic activity in the presence of SO_2 at low temperature. Choosing the suitable NH_3/NO ratio and elevation of reaction temperature both could weaken the influence of SO_2 on the SCR activity of the V3Mo5/WTi catalyst. Thermal treatment of the deactivated catalyst at350°C could get the low temperature activity recovered. The decrease of GHSV improved the de NO_x efficiency at low temperature and we speculated that the rational technological process and operation parameters could contribute to the application of this kind of catalysts in real industrial environment.     

电子垃圾的处理技术

本文着重探讨电子垃圾资源化的先进工艺——人工拆解、粉碎／分选、电析、精炼回收贵金属,从不能直接再利用的电子垃圾中,低成本、低污染、高效率地回收金属、塑料、玻璃等原料投入再生产符合循环经济理念。     

低温条件下污水处理运行研究

低温是造成寒冷地区冬季生活污水生化处理效果差的主要原因。当温度降低至4cC左右时,活性污泥中大多数微生物的生长活性受到抑制,只有少数的耐冷微生物可以存活下来并保持一定的活性。本课题组以往的研究结果证明：在我国北方地区,完全可以分离到在低温下高效降解污水中有机物的耐冷细菌。通过投加耐冷茵可使污水的去除效率大大提高。但由于投加的耐冷茵的流失等原因,必须隔一定时间再次投菌,既费时费力,又增加投资。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

“十一五”期间甘南县环境噪声变化及防治对策

以甘南县环境监测站"十一五"期间环境噪声监测结果为依据,对县域的环境噪声进行分析,并提出了防治对策。     

具有自动清洗功能的低温等离子油烟净化装置设计与实现

为了克服现有的油烟净化器清洗困难、清洗成本高的不足,提供一种具有自动清洗功能的低温等离子油烟净化器,该具有自动清洗功能的低温等离子油烟净化器可随时清洗吸附的油烟,并且清洗容易、成本低。     

植被净初级生产力对气候变化的响应研究——以黄土高原燕沟流域为例

Vegetation net primary productivity (NPP) is a sensitive indicator to characterize the response of terrestrial ecosystems to the climate change. Projections of the NPP changes of the Loess Plateau under future climate scenarios have great significances in revealing the interactions among terrestrial ecosystems and climatic systems, as well as instructing future vegetation construction of this region. Here, we carried out a case study on the Yangou watershed in the Loess Plateau. Using the vegetation-producing process model (VPP) established for such small watersheds, we simulated the NPP of the Yangou watershed under different scenarios of climate changes. The results showed that the NPP significantly increased with the precipitation increasing and evidently decreased with the temperature increasing where the climate change occurred in the whole year or in the summer half year. However, where the climate change occurred in the winter half year, the increased precipitation had little effect on the NPP, and the increased temperature significantly reduced the NPP. There were clear differences among the response sensitivities of different vegetation types with trees and shrubs were more sensitive to the changes in temperature and precipitation than crops and grasses. Currently, the most favourable climate change scenario to the NPP in the Yangou watershed was T0P15 under which the precipitation increased by 15% and the temperature did not changed, in the whole year; in the meantime, the most unfavourable climate change scenarios was T2P-15 under which the precipitation declined by 15% and the temperature increased by 2℃, in the whole year.     

高浓度制药废水处理技术的研发及应用

制药废水组成复杂,污染物浓度高,污水CODcr浓度达10000mg/l,含有大量有毒、有害物质。本中采用催化氧化预处理+水解酸化+UASB+接触氧化+炭滤吸附的工艺流程,通过改善细部参数及改良配套设备设计,提高了各单元去除效率,降低了能耗及处理成本,出水CODcr浓度达到污水综合排放标准.     

水泥行业二氧化碳排放统计——以贵阳市为例

本文从水泥行业二氧化碳的排放统计出发,研究二氧化碳排放的重要影响因素、二氧化碳排放的指标体系,从而得出一套水泥行业二氧化碳排放统计的核算方法.以贵阳市为例,从三种不同活动水平的统计数据对水泥行业生产工艺过程中产生的CO2排放量进行估算比较,验证统计核算方法的有效性,为贵阳市乃至全国水泥行业CO2的减排提供一个可行的科学依据.     

东北地区畜禽养殖业污染物总量减排对策分析

论述了东北地区畜禽养殖业的污染现状,针对东北地区畜禽养殖业污染物总量减排的需要,从政策引导、清洁生产和全过程控污等方面提出了相应的污染物总量减排对策,并推荐合理可行和适合当地实际情况的畜禽养殖废物综合处理与资源化利用技术,为环保和农业部门的畜禽养殖业污染物总量减排工作提供一定参考。