沙颍河流域行政单元的排污权初始分配研究

初始排污权的有效分配是排污权交易制度实施的基础,结合中国现行行政特征,以行政单元作为排污权初始分配主体开展排污权初始分配研究。具体是：以沙颍河流域为例,根据淮河水利委员会制定的沙颍河流域水功能区划及COD、氨氮限排总量要求,以COD、氨氮作为排污权初始分配的客体,通过等比例削减方法对沙颍河流域内的行政单元进行了排污权初始分配,得到了流域内各市县级行政单元的COD、氨氮初始排放权,并在此基础上从政策可行性、区域合作性及上下游城市的协调性等方面提出了开展排污权初始分配的若干建议。     

利用玉米浸泡液产电的微生物燃料电池研究

以玉米淀粉生产过程中的浸泡液（玉米浸泡液）作为接种液和基质,利用“三合一”膜电极的单室空气阴极微生物燃料电池进行试验,采用在线监测电压和废水分析方法对产电功率和化学需氧量（COD）、氨氮进行测定,探讨高COD、高氨氮有机废水产电及废水处理的可行性.结果表明,经过94 d（1个周期）的连续运行（固定外电阻为1 000 Ω）,17 d时输出电压达到最大（525.0 mV）,稳定期最大输出功率可达169.6 mW/m²,此时电池相应的电流密度为440.2 mA/m²,内阻约为350 Ω,开路电压619.5 mV;但燃料电池电子利用效率较低（库仑效率为1.6%）;1个周期结束时浸泡液的COD去除率达到51.6%,氨氮去除率25.8%.本试验利用玉米浸泡液成功获得电能,同时对浸泡液有效地进行了处理,为其资源化利用提供新途径.     

镉引起蚕豆(Vicia faba)叶片DNA损伤和细胞凋亡研究

以蚕豆为研究对象,采用碱性、半碱性和中性彗星实验方法研究Cd对植物DNA的损伤,同时还采用DAPI染色法从细胞形态学入手研究Cd诱导的蚕豆叶片的细胞凋亡.用3种彗星实验研究Cd处理蚕豆叶片DNA损伤,结果表明Cd能够引起蚕豆叶片DNA损伤,但是不同Cd浓度引起DNA损伤的种类不同:5mg·L^-1Cd处理主要引起单链DNA损伤和碱性不稳定位点的形成;10mg·L^-1Cd处理时开始检测到DNA双链断裂;20mg·L^-1Cd处理下,各种类型的DNA损伤均明显增加,且DNA双链断裂尤其明显.DAPI染色法通过细胞形态学变化来检测蚕豆叶片细胞凋亡的结果表明,蚕豆叶片细胞在Cd处理下发生凋亡的过程与DNA损伤过程有很大的相关性.结果表明,Cd是一种基因毒性物质,同时证明Cd引起的DNA损伤是引起细胞发生凋亡的机制之一.     

微生物全细胞传感器在重金属生物可利用度监测中的研究进展

传统的物理化学方法主要用于测定环境重金属的总量,微生物全细胞传感器可以对土壤及水体环境的重金属生物可利用度进行监测.此外,微生物全细胞传感器还具有操作简单、快速、经济的特点,适用于污染事件的应急监测.微生物全细胞传感器的生物学元件主要由MerR、ArsR、RS等家族的金属调控蛋白和gfp、lux、luc等报告基因组成.调控蛋白、报告基因与微生物全细胞传感器的灵敏度、特异性和监测特点有关.受pH、金属螯合物及检测条件等因素的影响,不同的环境条件下的重金属生物可利用度是不同的.增加重金属在微生物细胞内的累积,进行调控蛋白的分子生物学改造,优化检测条件是提高传感器灵敏度、特异性和准确性的可行方案.实现污染物的原位和在线监测是微生物全细胞传感器的主要发展方向.     

7B04铝合金海洋性大气腐蚀研究

通过在青岛和海南开展的7B04铝合金户外大气暴露试验,利用失重分析、形貌观察、断面分析和电化学交流阻抗谱等研究了7B04铝合金在海洋性大气环境中的腐蚀动力学规律和腐蚀特征。结果表明,在青岛和海南等海洋性大气环境中,7B04铝合金腐蚀初期以点蚀形式萌生,随后向均匀腐蚀发展;腐蚀过程均经历了腐蚀速率由高到低的过程,且腐蚀失重与时间的关系均可用幂函数显著回归;电化学阻抗谱分析表明当腐蚀产物足够厚时,7B04铝合金海洋性大气腐蚀的电化学过程由侵蚀性离子的扩散步骤来控制。     

Eco-design practices towards sustainable supply chain management: interpretive structural modelling (ISM) approach

Due to increasing emphasis on sustainable practices, many organisations have attempted to leverage their supply chain performance towards balancing triple bottom line dimensions (economic, environmental and social perspectives). This paper, therefore, determines the priorities of sustainable supply chain management focusing on eco-design. Interpretive structural modelling (ISM) and Matriced’ Impacts Croise’s Multiplication Appliquée a UN Classement (MIMAC) are used to identify the hierarchical structure of the relationships among eco-design dimensions, and to analyse characteristics power of each dimension on supporting eco-design practices. The relationships and characteristics power of each dimension are used to determine indicators that are effective in enhancement of eco-design practice, evaluated through sustainable supply chain performance. Results indicate that product deployment is an important approach for improving eco-design practice towards sustainable supply chain management. This emphasises the purpose and impact of eco-design on sequential supply chain activities at deployment phase. Further research is required to make an overall assessment of eco-design practices across range of manufacturing industries, given the current research is based on inputs from a limited number of experts of selected organisations.     

Impacts of interannual climate variability on past and future forest composition

Numerous analyses of the possible impacts of future climatic changes on tree species composition have been published for both lowland and high-elevation forests. Most of these studies were based on the application of forest "gap" models, and the vast majority of them considered only changes in the average of climatic parameters over time. In this study, we use a unique data set on reconstructed past climatic variations to analyse forest dynamics simulated by the forest gap model ForClim. This analysis forms the basis for a systematic exploration of the ecological effects of changing means vs. changing variability of climate on central European forests. A reconstruction of historical climate covering the last 470 years in the Swiss lowlands (ClimIndex) is extrapolated to a transect across the alpine (cold) treeline and used to simulate the influence of climate variations on the time scale of decades on forest biomass and tree species composition at both sites. While the simulation at the low-elevation site shows little sensitivity to climate variations, the results from upper subalpine forests suggest that two major dieback events would have occurred at elevations above the current but below the climatic tree line, induced by clusters of exceptionally cold summers. The results are in agreement with available dendrochronological data and with documentary evidence on massive negative impacts on flora and fauna at high elevations during these periods. We conclude that ForClim is capable of capturing the effects on tree population dynamics of climate variability at these sites as reconstructed from the ClimIndex record. A factorial design is used to address the sensitivity of ForClim to changes of the long-term averages vs. changes of the variability of monthly temperature and precipitation data. To this end, the simulated tree species composition of near-natural forests is examined along a climate gradient in Europe. The results indicate that there are three types of forest response: (1) little sensitivity to both kinds of change, (2) strong sensitivity to changes in the means, but little sensitivity to changing variability, and (3) strong sensitivity to changing variability at least in parts of the examined climate space. Half of the cases investigated fall under the third category, suggesting that emphasis should be placed on also assessing the sensitivity of ecosystems to future changes in climate variability rather than on changes of average values alone. Electronic Publication     

长江中下游河道与岸线演变特点

分析了长江中下游河道岸线变化的主要因素，它们分别是河岸崩塌，泥沙淤积及人类活动等，其中河岸崩塌是河道岸线演变的最主要原因。总的来说长江中下游干流河势是稳定的，但五个河段有各自演变特点和规律，其中宜昌－枝城段河道与河床比较稳定，岸线顺直，但葛洲坝和三峡水利枢纽建成后对河床的冲刷作用较大；荆江段是长江著名的河曲段，其冲淤变化较大；城陵矶至湖口段为节点和分汊河床组成，一般来说节点较为稳定，而分汊河床不太稳定，湖口至江阴河段岸线一般较为稳定，但弯道河床变化较大；河口段不但受江流作用影响，还受潮流与波浪等共同影响，所以河口河床演变迅速，主要表现为汊道主泓迁移摆动。     

Geographic Variation in the Seasonal Reproductive Strategy of the Mite Varroa jacobsoni in the Honeybee Nest

Variation in the reproduction of Varroa jacobsoni mite was studied in relation to the expansion of the range of its parasitism on the honeybee. Geographic differences in the seasonal dynamics of mite reproduction in the nests of bee families were revealed. Variation in the sex ratio of mites and the factors inhibiting their reproduction at the northern boundary of the honeybee range are considered. The forms of parthenogenetic reproduction in V. jacobsoni are discussed.     

Sustainability of silicon feedstock for a low-carbon society

We need to ensure the sustainable management of advanced materials, such as purified silicon, that contribute to a low-carbon society. Because a drastic increase in the demand for photovoltaic (PV) systems is tightening the supply of silicon for PV cells, the sustainability of silicon feedstock needs to be explored. For this purpose, a material flow analysis of silicon in Japan from 1996 to 2006 is presented in this paper. Our analysis finds that rapid growth in demand for polycrystalline silicon (pc-silicon) and single crystalline silicon (sc-silicon) has changed the structure of the purified silicon supply. The strong demand for purified silicon for solar cells is responsible for this change. While off-grade silicon obtained as a by-product of electronic-grade silicon (EG-Si) covered the demand for solar sells before 2000, pc-silicon is currently produced independently for solar cells via an energy-intensive process. Analysis of the resource effective-use index (REI), which indicates how effectively purified silicon is used, shows progress in the effective use of pc- and sc-silicon. REI analysis indicates that the effective use of pc-silicon is reaching a maximum, while the effective use of sc-silicon is advancing, with a corresponding increase in price. To ensure a sustainable supply of silicon feedstock, this paper proposes four solutions: (1) production of solar-grade pc-silicon by a less costly and less energy-consuming method; (2) reduction in the amount of crystalline silicon per watt in solar cells; (3) acceleration of the development and deployment of other solar cell types; and (4) reuse and recycling of solar cells in the future.