一种新型双3,4-羟基吡啶酮类衍生物的合成及铀络合研究

以甲基麦芽酚为原料,经4步反应合成得到一种新型的四齿双3,4-羟基吡啶酮类衍生物,通过红外、紫外、核磁、质谱对其结构进行了表征.采用等摩尔连续变化法测定了四齿双3,4-羟基吡啶酮衍生物与UO22+的络合常数,在pH=7.4时,络合常数lgK=22.7,证实所合成的四齿双3,4-羟基吡啶酮衍生物有望成为一种新型的核素促排剂.     

Global population collapse in a superabundant migratory bird and illegal trapping in China

Persecution and overexploitation by humans are major causes of species extinctions. Rare species, often confined to small geographic ranges, are usually at highest risk, whereas extinctions of superabundant species with very large ranges are rare. The Yellow‐breasted Bunting (Emberiza aureola) used to be one of the most abundant songbirds of the Palearctic, with a very large breeding range stretching from Scandinavia to the Russian Far East. Anecdotal information about rapid population declines across the range caused concern about unsustainable trapping along the species’ migration routes. We conducted a literature review and used long‐term monitoring data from across the species’ range to model population trend and geographical patterns of extinction. The population declined by 84.3–94.7% between 1980 and 2013, and the species’ range contracted by 5000 km. Quantitative evidence from police raids suggested rampant illegal trapping of the species along its East Asian flyway in China. A population model simulating an initial harvest level of 2% of the population, and an annual increase of 0.2% during the monitoring period produced a population trajectory that matched the observed decline. We suggest that trapping strongly contributed to the decline because the consumption of Yellow‐breasted Bunting and other songbirds has increased as a result of economic growth and prosperity in East Asia. The magnitude and speed of the decline is unprecedented among birds with a comparable range size, with the exception of the Passenger Pigeon (Ectopistes migratorius), which went extinct in 1914 due to industrial‐scale hunting. Our results demonstrate the urgent need for an improved monitoring of common and widespread species’ populations, and consumption levels throughout East Asia.     

煅烧温度对γ-Fe_2O_3催化剂结构及其脱硝活性的影响

采用沉淀-微波热解法,以Fe SO4·7H2O为铁源制备环境友好的γ-Fe2O3催化剂,结合XRD(X射线衍射)、N2等温吸附-脱附、SEM(扫描电子显微镜)、EDS(能谱仪)等手段对催化剂样品的晶相、孔结构、表面形貌、表面元素组成等进行表征,并考察其NH3-SCR(选择性催化还原)脱硝性能,研究煅烧温度对γ-Fe2O3催化剂物性及NH3-SCR脱硝性能的影响规律.结果表明:300、350和450℃下煅烧制备的催化剂中生成的杂质α-Fe2O3对SCR反应不利,而400℃煅烧制备的γ-Fe2O3催化剂脱硝性能最优,NOx转化率最高可达95%以上,XRD结果表明其纯度高,并且在60~100 nm孔径区间具有发达的孔隙结构,有利于SCR反应进行;随着煅烧温度升高,γ-Fe2O3催化剂表面晶格氧逐渐增加,颗粒形貌经历了片状颗粒(300、350℃)→球状颗粒(400℃)→针状颗粒(450℃)的变化过程,均匀的球状颗粒形貌及其表面丰富的晶格氧是400℃煅烧制得催化剂具备最优脱硝性能的重要因素.     

Cytogenetic studies of chromium (III) oxide nanoparticles on Allium cepa root tip cells

The current study evaluates the cytogenetic effects of chromium (III) oxide nanoparticles on the root cells of Allium cepa. The root tip cells of A. cepa were treated with the aqueous dispersions of Cr₂O₃ nanoparticles (NPs) at five different concentrations (0.01, 0.1, 1, 10, and 100 μg/mL) for 4 hr. The colloidal stability of the nanoparticle suspensions during the exposure period were ascertained by particle size analyses. After 4 hr exposure to Cr₂O₃ NPs, a significant decrease in mitotic index (MI) from 35.56% (Control) to 35.26% (0.01 μg/mL), 34.64% (0.1 μg/mL), 32.73% (1 μg/mL), 29.6% (10 μg/mL) and 20.92% (100 μg/mL) was noted. The optical, fluorescence and confocal laser scanning microscopic analyses demonstrated specific chromosomal aberrations such as—chromosome stickiness, chromosome breaks, laggard chromosome, clumped chromosome, multipolar phases, nuclear notch, and nuclear bud at different exposure concentrations. The concentration-dependent internalization/bio-uptake of Cr₂O₃ NPs may have contributed to the enhanced production of anti oxidant enzyme, superoxide dismutase to counteract the oxidative stress, which in turn resulted in observed chromosomal aberrations and cytogenetic effects. These results suggest that A. cepa root tip assay can be successfully applied for evaluating environmental risk of Cr₂O₃ NPs over a wide range of concentrations.     

Ultrasound-assistant preparation of Cu-SAPO-34 nanocatalyst for selective catalytic reduction of NO by NH3

The influence of the various preparation methods of Cu-SAPO-34 nanocatalysts on the selective catalytic reduction of NO with NH₃ under excess oxygen was studied. Cu-SAPO-34 nanocatalysts were prepared by using four techniques: conventional impregnation (IM), ultrasound-enhanced impregnation (UIM), conventional deposition precipitation (DP) using NaOH and homogeneous deposition precipitation (HDP) using urea. These catalysts were characterized in detail by various techniques such as N₂-sorption, XRD, TEM, H₂-TPR, NH₃-TPD and XPS to understand the catalyst structure, the nature and the dispersed state of the copper species, and the acid sites for NH₃ adsorption. All of the nanocatalysts showed high activities for NO removal. However, the activities were different and followed the sequence of Cu-SAPO-34 (UIM) > Cu-SAPO-34 (HDP) > Cu-SAPO-34 (IM) > Cu-SAPO-34 (DP). Based on the obtained results, it was concluded that the NO conversion on Cu-SAPO-34 nanocatalysts was mainly related to the high reducibility of the isolated Cu^2 + ions and CuO species, the number of the acid sites and the dispersion of CuO species on SAPO-34.     

基于3S技术的景观格局指数空间尺度效应变化研究

本文在阐述景观格局指数空间尺度效应重要意义及3S技术特点的基础上,以四川省木里县梭罗沟金矿矿区为研究区,介绍了3S技术在不同空间尺度提取景观格局指数的技术要求、数据收集和工作流程,并对研究区不同空间尺度景观格局指数的提取结果进行了效应分析,将各景观格局指数随空间尺度表现出不同变化趋势划分为五种类型,确定了该研究区域景观格局分析的最适宜空间尺度为1.0 m~5.0 m。景观格局指数空间尺度效应分析研究,有利于揭示景观格局与尺度效应相互作用的机理,进而对景观格局的尺度推演的方向、过程进行模拟、预测、分析和评价等研究提供重要的科学参考,并对遥感数据和地理信息系统的正确使用具有重要的科学意义。     

Bending force prediction for dynamic roll-bending during 3-roller conical bending process

Cylindrical as well as conical cross-section structural parts are widely used in industrial applications worldwide. Such parts are produced from metal plates using many manufacturing methods. 3-roller conical bending process is one such process. In this process first the metal plates in specified blank shapes are given static bending in the rollers. Then the rollers are driven using motors for bending of the blanks under dynamic condition. During bending reaction forces will be there on the rollers. Forces acting on the rollers during the process are transmitted to the machine frame at the roller supports. In the paper an analytical model is developed for the prediction of force during the stage of dynamic bending. The model consists of various parameters like material parameters and geometrical parameters. Experimentation is carried out and the developed model is validated with the experimental results. Effects of various material and geometrical parameters are studied in the present paper. The present work can give insight in the process and can be helpful to the designers as well as to the researchers working in the area of metal forming.     

空气质量预测数据的三维雾化展示技术

在国家＂863＂项目＂重点城市群大气复合污染综合防治技术与集成示范项目＂的研究中,通过利用DirectX3D编程技术将体积雾与体纹理技术进行创造性结合,实现了空气质量预测数据的三维雾化展示。本文主要阐述了此研究的背景、研究过程、技术要点及研究成果。     

n(NO3--N)/n(NO2--N)对混培养菌与纯培养菌同步脱氮除硫的影响

在温度30℃、pH为7、硫氮比为5/3、厌氧条件下,对比研究了不同n(NO-3-N)/n(NO-2-N)对荧光假单胞菌和铜绿假单胞菌混培养菌同步脱氮除硫影响.随着n(NO-3-N)/n(NO-2-N)减小,荧光假单胞菌、铜绿假单胞菌对NOx-N去除率逐渐增高,而S2-去除率却依次减少,混培养菌对NOx-N去除效率先增加后趋于平稳.n(NO-3-N)/n(NO-2-N)对混培养菌去除S2-几乎没有影响.荧光假单胞菌能迅速将NO-3-N转化为NO-2-N,但NO-2-N转为N2却相对缓慢,培养液中出现NO-2-N累积;而铜绿假单胞菌将NO-2-N还原N2的能力明显比荧光假单胞菌强,培养液未反应的NOx-N以NO-3-N为主,未出现NO-2-N累积.混培养菌对NOx-N转化的情况介于荧光假单胞菌与铜绿假单胞菌之间.荧光假单胞菌同时获得较高NOx-N、S2-去除的n(NO-3-N)/n(NO-2-N)为5/5,铜绿假单胞菌为10/0,混培养菌为5.0/5.0.混培养菌对NOx-N、S2-的同步去除效果优于单菌株荧光假单胞菌和铜绿假单胞菌.