TA-FTIR/MS用于硝酸铵及其混合物的热化学行为研究

为评价物料混合对危险化学品热化学行为的影响,采用热分析-红外/质谱联用技术(TA-FTIR/MS)研究硝酸铵、柠檬酸和蔗糖的混合物的热化学行为。通过对硝酸铵及其混合物的分解温度和分解过程中逸出气体的分析,发现硝酸铵、柠檬酸和蔗糖的混合物热分解温度分别降低至135℃和153℃,而硝酸铵与甲基纤维素的混合物分解温度与硝酸铵基本相同为201℃,且各混合体系的气相分解产物均有氮氧化物(NOX),H2O和CO2。结果表明,混合物受热后其中的硝酸铵首先分解为硝酸和氨气;酸性物质和还原性物质由于对硝酸的分解反应有催化作用,使得混合物的热稳定性下降。     

苔藓Lophozia ventricosa挥发油化学成分研究

采用水蒸气蒸馏法提取苔藓Lophozia ventricosa挥发油，用毛细管色谱法对挥发油进行了分析，采用归-化法确定各组分的相对含量，并用GC—MS联用技术对分离的化学成分进行鉴定．经计算机检索并结合文献调研，共鉴定出28个化合物，占挥发油总量的93．3％，其中含1个单萜、23个倍半萜（15个为含氧倍半萜）和1个二萜，主要成分为Maalioxide（45．6％）和Eudesma-4．（15），7（11）-dien-8-one（28．9％）．图2表1参12     

Two-site kinetic modeling of bacteriophages transport through columns of saturated dune sand

Breakthrough curves, on a semi-log scale, from tests in porous media with block-input of viruses, bacteria, protozoa and colloidal particles often exhibit a typical skewness: a rather slowly rising limb and a smooth transition of a declining limb to a very long tail. One-site kinetic models fail to fit the rising and declining limbs together with the tail satisfactorily. Inclusion of an equilibrium adsorption site does not seem to improve simulation results. This was encountered in the simulation of breakthrough curves from a recent field study on the removal of bacteriophages MS2 and PRD1 by passage through dune sand. In the present study, results of laboratory experiments for the study of this issue are presented. Breakthrough curves of salt and bacteriophages MS2, PRDI, and phiX174 in 1 D column experiments have been measured. One- and two-site kinetic models have been applied to fit and predict breakthrough curves from column experiments. The two-site model fitted all breakthrough curves very satisfactorily, accounting for the skewness of the rising limb as well as for the smooth transition of the declining limb to the tail of the breakthrough curve. The one-site model does not follow the curvature of the breakthrough tail, leading to an overestimation of the inactivation rate coefficient for attached viruses. Interaction with kinetic site 1 is characterized by relatively fast attachment and slow detachment, whereas attachment to and detachment from kinetic site 2 is fast. Inactivation of viruses and interaction with kinetic site 2 provide only a minor contribution to removal. Virus removal is mainly determined by the attachment to site 1. Bacteriophage phiX174 attached more than MS2 and PRD1, which can be explained by the greater electrostatic repulsion that MS2 and PRD1 experience compared to the less negatively charged phiX174.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, -thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².

The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

Monoterpene emissions and carbonyl compound air concentrations during the blooming period of rape (Brassica napus)

An increasing percentage of agricultural land in Germany is used for oil seed plants. Hence, rape has become an important agricultural plant (in Saxony 1998: 12% of the farmland) in the recent years. During flowering of rape along with intensive radiation and high temperatures, a higher production and emission of biogenic VOC was observed. The emissions of terpenes were determined and more importantly, high concentrations of organic carbonyl compounds were observed during this field experiment. All measurements of interest have been carried out during two selected days with optimal weather conditions. It is found that the origin or the mechanism of formation of different group of compounds had strong influence on the day to day variation of their concentrations. The emission flux of terpenes from flowering rape plants was determined to be 16–32 μg h⁻¹ m⁻² (30–60 ng h⁻¹ per g dry plant––540–1080 ng h⁻¹ per plant), in total. Limonene, α-thujene and sabinene were the most important compounds (about 60% of total terpenes). For limonene and sabinene reference emission rates (M_S) and temperature coefficients were determined: β_limonene=0.108 K⁻¹ and M_S=14.57 μg h⁻¹ m⁻²; β_sabinene=0.095 K⁻¹ and M_S=5.39 μg h⁻¹ m⁻².The detected carbonyl compound concentrations were unexpectedly high (maximum formaldehyde concentration was 18.1 ppbv and 3.4 ppbv for butyraldehyde) for an open field. Possible reasons for these concentrations are the combination of primary emission from the plants induced by high temperature and high ozone stress, the secondary formation from biogenically and advected anthropogenically emitted VOC at high radiation intensities and furthered by the low wind speeds at this time.     

水解酸化-缺氧法处理采油废水的污染物迁移降解试验研究

水解酸化．缺氧法对采油废水有较好的处理效果，采用GC／MS技术对水解酸化-缺氧法处理采油废水过程中污染物的迁移降解进行的研究表明：水解酸化段和缺氧段对采油废水中碳原子为C6-C9、分子量为100—140的有机物均有较好的降解能力。其中，在水解酸化段中酮类、芳烃得到较好的降解，缺氧段中酚类和醚类化合物降解明显。水解酸化-缺氧工艺对于采油废水中的甲苯和二甲苯具有较好的降解能力。     

Molecular characterization of effluent organic matter in secondary effluent and reclaimed water: Comparison to natural organic matter in source water

Municipal wastewater reclamation is becoming of increasing importance in the world to solve the problem of water scarcity. A better understanding of the molecular composition of effluent organic matter(Ef OM) in the treated effluents of municipal wastewater treatment plants(WWTPs) is crucial for ensuring the safety of water reuse. In this study, the molecular composition of Ef OM in the secondary effluent of a WWTP in Beijing and the reclaimed water further treated with a coagulation–sedimentation–ozonation process were characterized using a non-target Fourier transform ion cyclotron resonance mass spectrometry(FT-ICR MS) method and compared to that of natural organic matter(NOM) in the local source water from a reservoir. It was found that the molecular composition of Ef OM in the secondary effluent and reclaimed water was dominated by CHOS formulas, while NOM in the source water was dominated by CHO formulas. The CHO formulas of the three samples had similar origins. Anthropogenic surfactants were responsible for the CHOS formulas in Ef OM of the secondary effluent and were not well removed by the coagulation-sedimentation-ozonation treatment process adopted.     

关于多氯联苯测定的探讨

对PCB测定中所使用的Aroclor和单体标准品的区别、联系和使用进行了分析阐述,并对PCB测定中的气相色谱法、气相色谱质谱联用法、生物分析法、免疫分析法的优点、局限性进行了比较.对今后的PCB的测定提出了建议。     

SPME-GC/MS法测定垃圾渗沥液中双酚A

建立了固相微萃取-气相色谱质谱联用法测定垃圾渗沥液中双酚A的方法,并用于广州大田山垃圾渗沥液中双酚A含量的测定。对影响萃取的参数进行了优化,实验选用涂层厚度为85μm聚丙烯酸酯(PA)萃取纤维,在搅拌速度为1200r/min、NaCl浓度为20%、pH2.0和室温条件下萃取60min。方法的线性范围为0.1～100μg/L,检出限为0.03μg/L,精密度为6.6%。应用本方法监测了广州大田山垃圾渗沥液中BPA的含量在生物法处理过程中的变化情况。     

GC/MS测定土壤中的酞酸酯

本文针对土壤中酞酸酯类化合物,采用快速压力溶剂萃取仪(ASE)提取,弗罗里柱净化,气相色谱-质谱联用仪(GC/MS)对酞酸酯类有机物进行定性、定量分析。实验过程中采用浓硫酸对实验器皿进行清洗,有效地防止环境中酞酸酯类有机物对样品的污染。结果表明:平均加标回收率在87%～106%之间,相对标准偏差在2.5%～6.5%之间,检出限在0.51μg/kg～1.6μg/kg之间。