生活垃圾与危险废物的焚烧工艺及污染防治措施比较

比较、归纳、总结了生活垃圾和工业危废焚烧项目在生产工艺、污染源产生及治理、污染物排放标准等方面的异同点,提出必须重视废气排污口设施与在线监测仪器的安装,应完善事故防范措施与应急预案等检查要求,为环保部门验收监测、监督管理工作提供技术支持.     

氯化剂对超细颗粒物与重金属共生成特性的影响

以循环流化床反应器为实验平台,研究了焚烧温度为850℃下添加剂（NH₄Cl和KCl）对超细颗粒物与重金属共生成特性的影响.结果表明：NH₄Cl和KCl的存在均会降低超细颗粒物的数量浓度,但KCl的效果更佳,发挥的是阶梯式或者协同式作用.此外,添加比例为3%时对超细颗粒物数量浓度的降低最为明显.重金属Cr,Mn,Ni主要通过夹带方式形成超细颗粒物;而重金属Pb,Cu,Zn则主要通过蒸发、冷凝和吸附方式累积在超细颗粒物中.无机氯在焚烧过程中可以作为颗粒之间良好的粘合剂,促进超细颗粒物之间的成长和团聚,同时促进其表面形态的生长.此外,K的存在会促进细模态颗粒物之间的凝聚成长,使得细模态颗粒物的峰值增大,而NH₄⁺的存在会降低粗模态颗粒物的峰值.本研究可为污泥等废物热处理过程中重金属与超细颗粒物的协同控制提供借鉴.     

Silver impregnated carbon for adsorption and desorption of elemental mercury vapors

The Hg0 vapor adsorption experimental results on a novel sorbent obtained by impregnating a commercially available activated carbon (Darco G60 from BDH) with silver nitrate were reported. The study was performed by using a fundamental approach, in an apparatus at laboratory scale in which a synthetic flue gas, formed by Hg0 vapors in a nitrogen gas stream, at a given temperature and mercury concentration, was flowed through a fixed bed of adsorbent material. Breakthrough curves and adsorption isotherms were obtained for bed temperatures of 90, 120 and 150°C and for Hg0 concentrations in the gas varying in the range of 0.8–5.0 mg/m3. The experimental gas-solid equilibrium data were used to evaluate the Langmuir parameters and the heat of adsorption. The experimental results showed that silver impregnated carbon was very effective to capture elemental mercury and the amount of mercury adsorbed by the carbon decreased as the bed temperature increased. In addition, to evaluate the possibility of adsorbent recovery, desorption was also studied. Desorption runs showed that both the adsorbing material and the mercury could be easily recovered, since at the end of desorption the residue on solid was almost negligible. The material balance on mercury and the constitutive equations of the adsorption phenomenon were integrated, leading to the evaluation of only one kinetic parameter which fits well both the experimentally determined breakthrough and desorption curves.     

不同粒径垃圾焚烧底渣的特性和PAHs含量及毒性浸出

研究了不同粒径垃圾焚烧底渣的质量分布、物质成分(XRF)、晶体结构(XRD)、PAHs含量、酸反应特性、PAHs含量以及在2种浸出液中的毒性浸出情况。在比较国内外相关研究的基础上,实验得出垃圾焚烧底渣主要分布在粒径大于0.28 mm范围内,相比一些地区的研究结果要偏细;主要的物质成分为SiO2、CaO、Al2O3、Fe2O3、MgO、Na2O和K2O,而主要的晶体结构则分别为CaCO3、SiO2、Ca(OH)2和Mg0.3Ca0.97CO3,都与其他地区的研究结果基本相同;PAHs含量为0.043 4~0.247 mg/kg,与一些研究欧洲地区底渣中PAHs的含量的结果基本相近,且PAHs同类物的含量也随着底渣粒径的减小而增大;同时,实验还得出底渣中8种重金属在2种浸出液中的浸出浓度都未超出危险废物浸出毒性鉴别标准值(GB 5085.3-2007),但当底渣粒径大于0.6 mm时,其对环境中酸性物质的缓冲能力变弱。通过比较国外的一些研究结果,得出如将底渣作为建材利用时,需采用相应防范措施以防止其所含的重金属对周围土壤和水体的影响。希望能为进一步认识、处理和利用垃圾焚烧底渣提供一定的理论参考。     

外加电势强化厌氧氨氧化工艺处理垃圾焚烧渗沥液短程硝化出水

利用外加电势强化厌氧氨氧化处理垃圾焚烧渗沥液短程硝化出水, 研究外加电势对系统脱氮及有机物去除的影响。结果表明, 在外加电势为0.06 V时, TN的去除率由43.2%提升至71.3%, COD的去除率由12.1%提升至24.4%。渗沥液中分子质量大于20 kDa的有机物在外加电势的作用下被部分降解成分子质量相对较小的有机物。外加电势也会刺激微生物产生更多的EPS且能提高其中PN/PS的比值, 这有利于厌氧氨氧化菌在电极表面的生长和富集, 增强微生物的活性。电极生物膜中细胞色素c(Cyt-c)、亚硝酸盐还原酶(Nir)、肼合成酶(HZS)和肼脱氢酶(HDH)4种厌氧氨氧化菌的功能酶的活性也在外加电势的作用下得到了提升。     

用光伏污泥焚烧灰渣制备轻集料

针对工业污泥焚烧灰渣处置难的现状,以光伏污泥焚烧灰渣为主要原料制备轻集料。确定轻集料烧制的最佳条件为,黏土投加量为70%,MgO投加量为5%,污泥焚烧灰渣投加量为25%,预热温度为450 ℃,预热时间为15 min,焙烧温度为1 050 ℃,焙烧时间分别为10 min,所制备出的轻集料的抗压强度为9.52 MPa,堆积密度为867 kg·m-3,烧失量为0.12%,1 h吸水率为1.94%。所制得的轻集料强度高,吸水率小,符合《轻集料及其实验方法.第二部分：轻集料实验方法》（GB/T 17431.2-2010）的要求,可为光伏污泥焚烧灰渣资源化提供理论指导。     

我国城市生活垃圾的处理和发展趋势

城市生活垃圾给城市环境造成了严重污染，威胁了城市居民的生存环境和经济、社会的可持续发展。目前，国内采取的垃圾处理技术主要有卫生填埋、焚烧、堆肥等，热解技术由于具有资源回收率高、二次污染小、综合效益好等优点，越来越适合我国中小城市的垃圾处理。垃圾气化技术的研究成为当今世界的热点。此外，我国对垃圾衍生燃料的研究也刚刚起步。为促进城市持续、稳定的发展，提出了垃圾分类收集、分拣、综合利用垃圾处理技术的措施。     

己二胺有机废液在流化床中焚烧的实验研究

在实验室规模的热态流化床试验台上，进行了含5％己二胺有机废液的焚烧 实验研究，在700－900℃范围内，研究温度及空气过剩系数对NOx沿床高的变化规律，以及它们对NOx排放浓度的影响。实验结果表明，沿高度方向上NOx浓度 逐渐降低，并且存在NO2浓度大于NO浓度这一有趣现象，在900℃下氧量增加有利于密相区NO、NO2浓度的降低，说明在 有氧条件下NH2促进NOx的还原，在不同空气 过剩系数下和然相区出口NOx几乎为零 ，表明900℃是己二胺有机废液焚烧 的合适温度。     

Dehalogenation Potential of Municipal Waste Incineration Fly Ash

BACKGROUND, AIMS AND SCOPE: In the first part of this paper the main principles which control the dehalogenation of polychlorinated aromatic compounds on municipal waste incineration fly ash (MWI-FA) have been discussed and the model fly ash of similar dehalogenation activity has been proposed. Even if both systems show comparable dehalogenation properties, the main question concerning the postulated identical reaction mechanism in both cases is left unanswered. The other very important point is to what extent is this dechlorination mechanism thermodynamically controlled. The same problem is often discussed in the literature also for the de novo synthetic reactions. From the data it is clear that metallic copper plays a decisive role in the mechanism of the dehalogenation reaction. Although the results reported in the first part strongly support the idea that copper acts in this dechlorination as the reaction component, in contrast to its generally accepted catalytic behaviour, we believed that additional support for this conclusion can be obtained with the help of a thermodynamic interpretation of the mechanism of the reaction. RESULTS AND DISCUSSION: The pathways of hexachlorobenzene dechlorination on MWI-FA and model fly ash were studied in a closed system at 260-300 degrees C under nitrogen atmosphere. These pathways were the same for both systems, with the following prevailing sequences: hexachlorobenzene --> pentachlorobenzene --> 1,2,3,5-tetrachlorobenzene --> 1,3,5-trichlorobenzene --> 1,3-dichlorobenzene. Thermodynamic calculations were carried out by using the method of minimization total Gibbs energy of the whole system. In the calculations, the following reaction components were taken into account: all gaseous chlorinated benzenes, benzene, hydrogen chloride, a gaseous trimer Cu3Cl3, and also Cu2O and CuCl2 as solid components. The effect of the reaction temperature and the amount of copper and water vapour were considered as well. The effect of reaction temperature was determined from the data calculated for the 500 to 750 K temperature region. The effect of the initial composition was determined for the molar amounts of copper = 0.01-3 moles and water vapour = 0.2 to 3 moles per mole of chlorobenzene isomer CONCLUSIONS: The results of hexachlorobenzene dechlorination by MWI-FA and model fly ash under comparable reaction conditions allow us to conclude that both dechlorinations proceed via the same dechlorination pathways, which can be taken as an evidence of the identical dehalogenation mechanism for both systems. The relative percentual distribution of the dehalogenated products depends on the temperature, but not on the initial amount of water vapour or copper metal. On the other hand, the initial amount of copper substantially affects the conversion of the dehalogenation as well as the molar ratio of Cu3Cl3 to HCl in the equilibrium mixture. Comparison of the experimental with thermodynamic results supports the idea that dehalogenation reactions are thermodynamically controlled. RECOMMENDATIONS AND OUTLOOK: Thermodynamic analysis of the dehalogenation reactions may prove useful for a wide range of pollutants. The calculations concerning polychlorinated biphenyls and phenols are under study.