Kinetics study of fermentative hydrogen production from liquid swine manure supplemented with glucose under controlled pH

Kinetics of H₂ production from liquid swine manure supplemented with glucose by mixed anaerobic cultures was investigated using batch experiments under four different pH conditions (4.4, 5.0, 5.6, and uncontrolled). The temperature for the experiments was controlled at 37 ± 1°C and the length of experiments varied between 50 and 120 hours, depending upon the time needed for completion of each individual experiment. The modified Gompertz model was evaluated for its suitability for describing the H₂ production potential, H₂ production rate, and substrate consumption rate for all the experiments. The results showed that the Gompertz model could adequately fit the experimental results. The effect of pH was significant on all kinetic parameters for H₂ production including yield, production rate and lag time, and the substrate utilization rate. The optimal pH was found to be 5.0, at which a maximum H₂ production rate (0.64 L H₂/h) was obtained, and deviation from the optimal pH could result in substantial reductions in H₂ production rate (0.32 L H₂/h for pH 4.0 and 0.43 L H₂/h for pH 5.6). The results also showed that if pH was not controlled for the batch fermentation process, the substrate utilization efficiency could steeply decrease from 98.8% to 33.7%.     

QSPR prediction of chromatographic retention times of pesticides: Partition and fractal indices

The high‐performance liquid‐chromatographic retentions of red‐wine pesticide residues are modeled by structure–property relationships. The effect of different types of features is analyzed: geometric, lipophilic, etc. The properties are fractal dimensions, partition coefficient, etc., in linear and nonlinear correlation models. Biological plastic evolution is an evolutionary perspective conjugating the effect of acquired characters and relations that emerge among the principles of evolutionary indeterminacy, morphological determination and natural selection. It is applied to design the co‐ordination index that is used to characterize pesticide retentions. The parameters used to calculate the co‐ordination index are the molar formation enthalpy, molecular weight and surface area. The morphological and co‐ordination indices barely improve the correlations. The fractal dimension averaged for non?buried atoms, partition coefficient, etc. distinguishes the pesticide molecular structures. The structural and constituent classification is based on nonplanarity, and the number of cycles, and O, S, N and Cl atoms. Different behavior depends on the number of cycles.     

Contributions to ecological chemistry CXII balance of conversion of buturon‐14C in wheat under outdoor conditions 1

Abstract

The urea herbicide buturon (N‐[p‐chlorophenyl] ‐N’ ‐methyl‐N’ ‐isobutinyl‐urea), ¹⁴C‐labeled, was sprayed on winter wheat as an aqueous formulation (2.98 kg/ha) under outdoor conditions. Upon harvest (three months after application), a total of 49. 2% of the applied radiocarbon was recovered: 2.0% in the plants, 46.9% in the soil, and 0.3% in the leaching water (depth > 50 cm); less than 0.1% was in the grains (0.464 ppm). Only about half of the radioactivity present in plants could be recovered under mild extraction conditions; about half of this was unchanged buturon. In straw and husk extracts, the following metabolites were identified by gaschromatography/mass spectrometry: N‐(p‐chlorophenyl)‐N‐methyl‐O‐methyl‐carbamate (metabolite I), N‐phenyl‐N’ ‐formyl‐urea (metabolite II), two unstable metabolites giving (p‐chlorophenyl)‐isocyanate upon purification (metabolites III and IV), N‐(p‐chlorophenyl)‐N’ ‐methyl‐N’ ‐isobutenylol‐urea (metabolite V), p‐chloroformanilide (metabolite VI) and biologically bound p‐chloroaniline (metabolite VII). In the root and basal stem extract, the following metabolites were identified by gas chromatography/mass spectrometry: N‐(p‐chlorophenyl)‐O‐methyl‐carbamate (metabolite VIII) and N‐(p‐chlorophenyl)‐N’ ‐methyl‐urea (metabolite IX).     

城市居民交通方式选择及其影响因素分析——以南京市为例

随着我国城市化水平的提高,城市交通能源消费占总能源消费的比重逐渐增大,交通方式选择及其影响因素研究引起广泛关注。本研究通过调查南京居民出行交通方式,并通过多项logit模型(multinomial logit model),探究影响居民交通选择的关键因素,为城市交通政策的制定提供科学依据,并根据估算结果分析不同政策下交通方式改变带来的节能减排效应。结果显示:出行特性(如出行距离)、出行者的个人特征(如性别、年龄、职业)与出行者的家庭特征(如是否有私家车,是否有小孩)都对交通方式选择有显著影响。如果通过有效的交通政策引导,使私家车出行转变为轨道交通出行,南京每天大约可减少1573.5吨碳排放。     

成都市餐厨垃圾产量分析预测及监管体系建设研究

整理汇总了成都市中心城区及郊县餐厨垃圾产生和收运现状,对其产量作出预测;在此基础上提出适合成都市自身情况的餐厨垃圾监管体系构建设想。     

基于SARIMA模型的黑龙江省冰雪旅游国际需求预测

选取黑龙江省1990-2011年冰雪旅游入境人次的月度时间序列为研究样本,建立SARIMA模型对黑龙江省冰雪旅游国际需求进行分析预测。结果表明,SARIMA（4,1,4）（1,1,1）。模型的拟合度和短期预测效果都较好。通过应用SARIMA模型进行冰雪旅游预测,以期对黑龙江省旅游企业的冰雪旅游国际客源市场开发及政府部门制定冰雪旅游发展战略和政策调整提供重要的理论依据。     

旅游产业园：理论模式与实践发展

旅游产业集群式发展成为新的发展趋势和现实要求,但目前国内仍存在多种发展模式。笔者认为,旅游产业园应特别突出旅游产业特色,既要考虑传统的观光度假功能,更应考虑上下游的旅游装备研发制造、旅游商品研发生产、旅游产品营销推广等各个环节。以鄱阳湖生态旅游产业园为例,分析了该产业发展模式的建设背景、战略意义、发展定位和建设内容。     

煤炭企业发展低碳经济的动力机制

将影响煤炭企业发展低碳经济的动力因素分为四大类,包括4个拉力因素、1个支撑因素、2个压力因素和4个推动力因素。设计了煤炭企业发展低碳经济的动力机制模型,在分析各个动力因素的基础上,构建了煤炭企业发展低碳经济的拉力机制模型、支撑机制模型、压力机制模型和推动力机制模型。     

城市旅游综合体发展模式与对策研究

旅游综合体顺应了世界休闲业发展的潮流,它以旅游为主导,是一种全新的生产力形态。界定了城市旅游综合体的基本概念,归纳了城市旅游综合体的主要特征,探讨了城市旅游综合体形成的机制,认为旅游消费转型发展、地方特色文化传承、城市商业发展、旅游供给能力升级、政府的城市发展政策支持是城市旅游综合体形成的主要因素。依据城市旅游综合体发展的核心驱动功能不同,将城市旅游综合体的开发模式分为娱乐旅游综合体、休闲度假游综合体、会展旅游综合体和商业旅游综合体4种类型,在此基础上,提出了促进城市旅游综合体健康持续发展的对策。     

树脂固定床吸附含酚废水预测模型研究

针对应用于实际工业化的树脂固定床吸附研究较少,而与之相关的固定床吸附穿透曲线可以用来确定固定床吸附操作参数,为固定床的设计和实际操作提供指导。通过对恒定波振荡理论和吸附等温方程的联合,来预测固定床吸附穿透曲线;并研究了不同操作条件对大孔弱碱树脂吸附对硝基酚穿透曲线预测模型的影响。以期望为树脂固定床的设计和实际工业应用产生指导意义。