大空间建筑不同排烟系统作用下的烟气控制效果研究

利用FDS(Fire Dynamics Simulator)分别对自然排烟和机械排烟作用下的中庭火灾烟气控制效果进行了数值模拟研究,自然排烟口的面积分别为中庭地面面积的5.6%、11.3%和22.5%,机械排烟量分别为43182m3/h和102000m3/h,同时改变机械排烟口的位置。通过对比各工况下的竖向温度分布、中庭内温度场、烟气层界面高度来判断不同工况下的排烟效果,并计算得到了相应排烟效率来判断各排烟模式下的排烟有效性。结果显示,中庭内的温度和排烟效率都随排烟量的增大而减小,自然排烟的排烟效率最低,仅为17.9%~21.3%,机械排烟量43182m3/h时的排烟效率最高,可达45%左右。     

复杂地形机械湍流扩散的粒子随机行走模拟

应用粒子随机行走模拟方法模拟了高架点源在中性情况下在复杂地形上的排放,并将模拟结果与风洞实验进行了比较,二者能较好地吻合。虽然将该方法用于复杂地形大气扩散计算在技术上不存在什么困难,但是在确定模式基本参数等方面,还应该慎重考虑。      

Influence of Mowing <Emphasis Type="Italic">Artemisia tridentata</Emphasis> ssp. <Emphasis Type="Italic">wyomingensis</Emphasis> on Winter Habitat for Wildlife

Mowing is commonly implemented to Artemisia tridentata ssp. wyomingensis (Beetle & A. Young) S.L. Welsh (Wyoming big sagebrush) plant communities to improve wildlife habitat, increase forage production for livestock, and create fuel breaks for fire suppression. However, information detailing the influence of mowing on winter habitat for wildlife is lacking. This information is crucial because many wildlife species depended on A. tridentata spp. wyomingensis plant communities for winter habitat and consume significant quantities of Artemisia during this time. Furthermore, information is generally limited describing the recovery of A. tridentata spp. wyomingensis to mowing and the impacts of mowing on stand structure. Stand characteristics and Artemisia leaf tissue crude protein (CP), acid detergent fiber (ADF), and neutral detergent fiber (NDF) concentrations were measured in midwinter on 0-, 2-, 4-, and 6-year-old fall-applied mechanical (mowed at 20 cm height) treatments and compared to adjacent untreated (control) areas. Mowing compared to the control decreased Artemisia cover, density, canopy volume, canopy elliptical area, and height (P < 0.05), but all characteristics were recovering (P < 0.05). Mowing A. tridentata spp. wyomingensis plant communities slightly increases the nutritional quality of Artemisia leaves (P < 0.05), but it simultaneously results in up to 20 years of decrease in Artemisia structural characteristics. Because of the large reduction in A. tridentata spp. wyomingensis for potentially 20 years following mowing, mowing should not be applied in Artemisia facultative and obligate wildlife winter habitat. Considering the decline in A. tridentata spp. wyomingensis-dominated landscapes, we caution against mowing these communities.     

成炭型有机大分子/层状无机物复合成炭剂的制备及应用研究

层状无机物在聚合物基体中易团聚,限制了其在聚合物材料中的规模化应用。本工作通过将有机改性蒙脱土(OMMT)与一种具有超支化结构的磷氮大分子化合物HTPPP(以三嗪结构为基础,通过焦磷酸结构连接)在醇水体系中混合溶胀,再经过高温脱水,制备成HTPPP插层、剥离的OMMT成炭型有机大分子/层状无机物复合成炭剂(HTPPP-OMMT)。XRD测试表明层状结构的OMMT能够在HTPPP中被完全剥离。OMMT的复合降低了HTPPP的水溶性,并提高了其热稳定性。将有机/无机复合成炭剂HTPPP-OMMT作为单组分无卤膨胀阻燃剂应用于聚丙烯(PP),阻燃测试表明HTPPP-OMMT复合成炭剂的阻燃效率高于HTPPP。这是由于其在材料燃烧过程中能够催化形成更加致密的膨胀多孔炭层,而炭层在高温下的热氧稳定性更好。此外,有机/无机复合改善了HTPPP-OMMT在PP的相容性,能提高材料的力学和耐析出性能。     

Assessment of frequent cutting as a plant-community management technique in power-line corridors

Repeated cutting of vegetation at or near ground level in power-line corridors is a common practice for inhibiting tree growth and regeneration. However, few data exist on long-term community responses. In this study, we sampled 20 northern Kentucky power-line corridors and compared their seedling and sapling communities to the edges and interiors of adjacent undisturbed forests. Mean seedling and sapling density in corridors was roughly twice that of adjacent undisturbed forest interiors, suggesting that repeated cutting is not a viable method of inhibiting tree regeneration. Corridor communities were dominated byRobinia pseudoacacia (black locust) andFraxinus americana (white ash), but ordinations indicated strong similaritties among communities in corridors and adjacent forests. Many of the tree species found in adjacent forests, with the exception of a few shade-tolerant species, had highest seedling and sapling densities in corridors. Stump or root sprouting by many species appears to regenerate forests quickly after cutting. However, disturbed soil and detritus accumulations caused by management crews and their equipment may also create a large variety of microsites for seedling establishment. Because repeated cutting selects for dominance by species with highest sprout growth rates, it should not be used as the sole management technique. It may instead be used to alter the vigor, stature, and stored reserves of trees so that herbicides or other methods of tree control can be used more efficiently.     

废弃电子设备的资源化研究发展现状

分析了废弃电子设备的主要特点、资源化回收与利用的不同方法及其优缺点，并详细介绍了废弃电子设备机械处理的研究及工业应用现状。     

Octachlorinated dioxin in pulps and effluents: Where does it come from?

Studies on the formation/destruction of dioxins associated with the pulping of wood artificially impregnated with an industrial grade of pentachlorophenol lend support to an earlier observation that ambient dioxins deposition may not necessarily be a unique source of the higher chlorinated dioxins occasionally found in pulps and final effluent discharges. These dioxins, which seemingly occur in products from a wide range of pulping technologies including recycle operations, may also originate from pentachlorophenol-based fungicides.     

甘肃省土壤环境机械组成调查研究

通过对甘肃省土壤环境机械组成的调查研究，较全面、系统地获得了各种元素、土类以及各区域的土壤环境机械组成，找出了本省土壤环境机械组成特征及其分布规律。     

Physics of failure analysis of power section assembly for positive displacement motor

Power section assembly is the core part of positive displacement motor (PDM), and its mechanical behavior and service life determine the drilling efficiency and cycle. In this paper, fault tree of power section assembly was established, failure reasons were analyzed and improvement measures were put forward. Finite element models of conventional lining and uniform wall thickness lining of 5/6 PDM were established, and the mechanical behaviors were investigated. Working parameters such as drilling fluid pressure, rubber hardness, downhole temperature and pressure difference were discussed. The results show that wear and rust are the main failure modes of the rotor. Failure modes of rubber lining are wear, tear, rupture, peeling off, thermal failure and fatigue failure. Under the action of drilling fluid pressure, the maximum effective stress of rubber lining appears in the bottom of arc, and the minimum stress appears at the top of arc. But deformation distribution is opposite to the effective stress. Deformation of uniform wall thickness lining is more uniform. Effective stress of the lining increases with the increasing of drilling fluid pressure and rubber hardness, but it decreases with the downhole temperature increases. Deformation of the lining increases with the drilling fluid pressure increases, but it decreases with the increasing of rubber hardness and downhole temperature. Effective stress and deformation distribution of rubber lining are more uneven with the pressure difference increases. High stress area lies between the two smallest chambers.     

Utilization of limestone dust waste as filler in natural rubber

The possibility of using limestone dust waste (LDW) as a filler in natural rubber (NR) was investigated. First, the basic properties of LDW were characterized; LDW was then incorporated into NR and the compound properties were determined. Comparison of the reinforcing effect of LDW and other commercial fillers such as light-precipitated calcium carbonate (PCC) and nanoprecipitated calcium carbonate (NPCC) was made. The results revealed that even though the addition of LDW has little effect on compound processability, it has a negative effect on most mechanical properties, e.g., tensile strength, tear strength, and abrasion resistance, of the vulcanizate. Among the three fillers, the degree of reinforcement could be placed in the following order: NPCC > PCC > LDW. Due to their relatively low specific surface area and thus low reinforcement ability, both LDW and PCC can be grouped as nonreinforcing fillers, whereas NPCC, the specific surface area of which is relatively high, could be grouped as a semi-reinforcing filler for rubber.