Rehabilitation of a lowland river: Reconciling flood defence with habitat diversity and geomorphological sustainability

Geomorphologically appropriate rehabilitation measures were proposed to enhance the in-stream environment of the lowland River Idle, north Nottinghamshire, UK. However, the River Idle has multi-functional management requirements including those of flood defence so environmental enhancement must be pursued without significantly increasing the flood risk. Hydraulic testing of rehabilitation proposals is complicated because of the stringent assumptions about flow and morphology in ‘traditional’ hydraulic models. While new generation two- and three-dimension hydraulic models may overcome some of these problems, they are extremely data intensive, require advanced modelling capabilities and are, therefore, very expensive to apply. Also, they do not yet predict morphology-flow interactions adequately. As an alternative, several simple hydraulic models were applied to test the rehabilitation proposals, based on a fitness-for-purpose criterion.BENDFLOW was applied to fine tune the optimal siting of measures and to estimate the additional near-bank scour generated by proposed bend re-profiling. HMODEL2 and the FCFA method were used to test the impact on local channel conveyance capacities and HECRAS was applied to simulate the impact of the proposals on regional flood defence. Indicative results from the testing suggested a maximum increase in near-bank scour of 0·15 m in re-profiled bends, a loss of approximately 10% in flood conveyance locally due to deflector installation or reed and tree planting, and a 0·12 m increase in flood stage within the reach for a 15 year flood. The modelling results were acceptable to the management authority as an indication of an acceptable compromise between flood defence and conservation interests, and construction of the measures followed in 1996. It is clearly that it will require the results of post-project monitoring to indicate whether compromises made to the rehabilitation initiatives in order to satisfy flood defence requirements have unduly reduced their environmental enhancement potential but, for assessing the proposed methods, the models are recommended for use other lowland river environments.     

超高速瞬态测试系统软硬件构架设计研究

目的研究采样频率为2~10 MHz的64通道超高速同步瞬态测试系统的设计技术,实现两类典型超高速瞬态测试系统的硬件架构设计与软件架构设计。方法一类采用PXI-Express高带宽总线和高速RAID磁盘阵列架构构建持续流盘存储的连续高速测试系统,另一类是采用大容量板载数据缓存和PXI总线事后下载传输数据的架构构造高速测试系统。在高性能测试软件设计方面,主要应用生产者/消费者结构与有限状态机相结合的软件架构进行高性能测试系统软件设计。结果目前64通道下基于持续流盘架构的测试系统受数据记录的速度限制系统最高采样频率仅达2.5 MHz,而基于板载缓存数据与PXI总线事后下载数据架构的测试系统最高采样频率可达10 MHz,测试时长可达5 s。结论当前两类架构的测试系统均可满足超高速瞬态测试需求,设计时需根据需求的最高采样频率决定使用的架构形式。     

固定源细颗粒物稀释测试法现场应用存在问题及影响因素分析研究

对基于大气环境的稀释测试法在现场应用中存在的主要问题进行了归纳总结,并对若干影响细颗粒物测试结果的重要因素进行了分析,诸如停留时间、稀释比、采样时间等因素,期望能够对该法测试系统的后续改进或重新设计提供实际问题导向,同时也能够对该领域现场工作的科研人员提供非常有用的经验。     

被动加标在水生生态风险评价中的应用——以多氯联苯分配系数的测定为例

准确的水生生态风险评价需要可靠的毒性数据,而其获取要求在一定时间范围内,水体中污染物的浓度保持恒定。对疏水性有机污染物进行水体生物毒性测试时,通常采用有机溶剂加标,然而该方式可能因为污染物的挥发和降解、容器壁吸附、生物摄取等问题,水体中污染物浓度持续下降,导致污染物的浓度-效应关系难以明确。近期为了克服这些问题,被动加标用于替代溶剂加标,通过污染物在加标体系中平衡分配来维持精确和恒定的水体浓度,同时还可通过测定加标聚合物中污染物的浓度来监测水体浓度。首先介绍了被动加标方法及其材料选择,讨论了该方法在生态风险评价中的主要应用,包括分配系数的测定、体外细胞测试、体内生物积累及毒性测试,以及沉积物毒性评价等。然后,以测定代表污染物多氯联苯在聚二甲基硅氧烷与水间的分配系数为例,详细说明被动加标的操作流程。最后,讨论了被动加标方法的优缺点,并对其在水生生态风险中的应用前景进行了展望。     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

Comparative abiotic or biotic degradation of carboxin by two Entisols with different surface properties or Pseudomonas aeruginosa strain: A toxicity study using the crustacean Thamnocephalus platyurus

The microcrustacean Thamnocephalus platyurus was used to detect the toxicity reduction of carboxin in abiotic degradation compared to biotic degradation. The abiotic degradation was obtained using two sterilized Entisols with different surface properties while the biotic degradation by Pseudomonas aeruginosa was obtained using the fungicide as the only C source. The results showed that the highest toxicity reduction rates for the abiotic degradation were achieved in 20 days with 49.2% for the coarser soil, 60.7% for the soil with a finer texture, whereas for the biotic degradation, 60.6%. Analysis (¹H NMR) showed that the soils transformed carboxin to produce sulfoxide and enol in different concentrations depending on the soil properties, while P. aeruginosa metabolized the fungicide to produce inorganic compounds such as ammonium and nitrite, minor degradation pathways were oxidized to sulfoxide and hydrolytic ring-opening to 2-[(2-hydroxyethyl)thio]acetoacetanilide enol. These results indicated that the degradation of carboxin occurred via abiotic catalytic processes as well as via biotic transformation leading to less toxic derivatives and such phenomena are caused by exchange/surface features of soils, rather than by the mere content of clay or organic matter fractions.     

几种压力容器在役监控技术及应用

介绍了若干压力容器在役监控技术的实例。声发射技术和超声检测是比较可行的监控技术。