Thermal removal of PCDD/Fs from medical waste incineration fly ash--effect of temperature and nitrogen flow rate

The fly ash used in this study was collected from a bag filter in a medical waste rotary kiln incineration system, using lime and activated carbon injection followed by their collection as mixed fly ash. Experiments were conducted on fly ash in a quartz tube, heated in a laboratory-scale horizontal tube furnace, in order to study the effect of temperature and nitrogen flow rate on the removal of PCDD/Fs. Results indicated that in this study PCDD/Fs in the fly ash mostly were removed and desorbed very little into the flue gas under thermal treatment especially when the heating temperature was higher than 350 °C, and dechlorination and destruction reactions took important part in the removal of PCDD/Fs. However, in terms of flow rate, when flow rate was higher than 4 cm s⁻¹, destruction efficiency of PCDD/Fs decreased dramatically and the main contributors were P₅CDF, H₆CDF and H₇CDF desorbed to flue gas, the PCDD/Fs in the fly ash decreased with enhanced flow rate.     

Recycled crushed glass in road work applications

A comprehensive suite of geotechnical laboratory tests was undertaken on samples of recycled crushed glass produced in Victoria, Australia. Three types of recycled glass sources were tested being coarse, medium and fine sized glass. Laboratory testing results indicated that medium and fine sized recycled glass sources exhibit geotechnical behavior similar to natural aggregates. Coarse recycled glass was however found to be unsuitable for geotechnical engineering applications. Shear strength tests indicate that the fine and medium glass encompass shear strength parameters similar to that of natural sand and gravel mixtures comprising of angular particles. Environmental assessment tests indicated that the material meets the requirements of environmental protection authorities for fill material. The results were used to discuss potential usages of recycled glass as a construction material in geotechnical engineering applications particularly road works.     

Multiple system modelling of waste management

Due to increased environmental awareness, planning and performance of waste management has become more and more complex. Therefore waste management has early been subject to different types of modelling. Another field with long experience of modelling and systems perspective is energy systems. The two modelling traditions have developed side by side, but so far there are very few attempts to combine them. Waste management systems can be linked together with energy systems through incineration plants. The models for waste management can be modelled on a quite detailed level whereas surrounding systems are modelled in a more simplistic way. This is a problem, as previous studies have shown that assumptions on the surrounding system often tend to be important for the conclusions. In this paper it is shown how two models, one for the district heating system (MARTES) and another one for the waste management system (ORWARE), can be linked together. The strengths and weaknesses with model linking are discussed when compared to simplistic assumptions on effects in the energy and waste management systems. It is concluded that the linking of models will provide a more complete, correct and credible picture of the consequences of different simultaneous changes in the systems. The linking procedure is easy to perform and also leads to activation of project partners. However, the simulation procedure is a bit more complicated and calls for the ability to run both models.     

Waste collection multi objective model with real time traceability data

Waste collection is a highly visible municipal service that involves large expenditures and difficult operational problems, plus it is expensive to operate in terms of investment costs (i.e. vehicles fleet), operational costs (i.e. fuel, maintenances) and environmental costs (i.e. emissions, noise and traffic congestions). Modern traceability devices, like volumetric sensors, identification RFID (Radio Frequency Identification) systems, GPRS (General Packet Radio Service) and GPS (Global Positioning System) technology, permit to obtain data in real time, which is fundamental to implement an efficient and innovative waste collection routing model. The basic idea is that knowing the real time data of each vehicle and the real time replenishment level at each bin makes it possible to decide, in function of the waste generation pattern, what bin should be emptied and what should not, optimizing different aspects like the total covered distance, the necessary number of vehicles and the environmental impact. This paper describes a framework about the traceability technology available in the optimization of solid waste collection, and introduces an innovative vehicle routing model integrated with the real time traceability data, starting the application in an Italian city of about 100,000 inhabitants. The model is tested and validated using simulation and an economical feasibility study is reported at the end of the paper.     

垃圾焚烧炉烟气净化系统的工艺分析

介绍了两种垃圾焚烧电厂烟气净化处理工艺,分析了垃圾焚烧烟气净化处理装置工艺流程及出口排放参数,提出目前适合的处理工艺及发展方向。     

Human health effects of residual carbon nanotubes and traditional water treatment chemicals in drinking water

The volume of industrial and domestic wastewater is increasing significantly year by year with the change in the lifestyle based on mass consumption and mass disposal brought about by the dramatic development of economies and industries. Therefore, effective advanced wastewater treatment is required because wastewater contains a variety of constituents such as particles, organic materials, and emulsion depending on the resource. However, residual chemicals that remain during the treatment of wastewaters form a variety of known and unknown by-products through reactions between the chemicals and some pollutants. Chronic exposure to these by-products or residual chemicals through the ingestion of drinking water, inhalation and dermal contact during regular indoor activities (e.g., showering, bathing, cooking) may pose cancer and non-cancer risks to human health. For example, residual aluminium salts in treated water may cause Alzheimer's disease (AD). As for carbon nanotubes (CNTs), despite their potential impacts on human health and the environment having been receiving more and more attention in the recent past, existing information on the toxicity of CNTs in drinking water is limited with many open questions. Furthermore, though general topics on the human health impacts of traditional water treatment chemicals have been studied, no comparative analysis has been done. Therefore, a qualitative comparison of the human health effects of both residual CNTs and traditional water treatment chemicals is given in this paper. In addition, it is also important to cover and compare the human health effects of CNTs to those of traditional water treatment chemicals together in one review because they are both used for water treatment and purification.     

Strength and durability characterization of pelletized coal–biomass household briquettes

Increase in waste sludge disposal is always seen as a problem from the point of production industry. However, it is clear that the reuse and recycle of sewage sludge could be a serious economic input. The most important action should be to determine the sludge characterizations and direct the producers towards appropriate reuse and recycling opportunities. In this study, reuse method was examined to produce coal briquette, which will constitute an example for waste sludge. In order to make use of the waste sludge, five different coal briquette samples were produced by mixing powdered coal and bitumen together with waste sludge, at different ratios. The overall results indicated that the sample named CB3 having 70% powdered coal, 20% waste sludge, and 10% bitumen was found to be the optimum coal briquette among the other samples produced. The proximate analysis of the optimum briquette sample was carried out according to the Turkish standards and regulations and it was found out that the produced briquette coal can have commercial value with a gross calorific value of 30.03 MJ/kg and 7.30% ash content.     

基于GIS分析的生态清洁小流域治理思路——以陕西省石泉县饶峰河小流域为例

生态清洁小流域建设对于维护重要水源区水生态安全具有极其重要的意义。以汉江上游的陕西省石泉县饶峰河小流域为研究对象,在对该小流域自然因素和社会经济因素进行调查的基础上,采用GIS空间分析方法,对该小流域治理区域进行精细划分。研究表明饶峰河小流域可划分7个不同的治理区域,分别为:生态修复区、坡耕地修复区、坡面治理区、坡耕地治理区、农田治理区、村镇综合治理区及河(沟)道周边整治区。根据各区域的污染产生特点,针对性地提出各区域治理方向,并进行治理措施配置。该研究可为生态清洁小流域精准治理提供一种新的建设思路。     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.