略论与电除尘器设计有关的几个问题

作者根据多年从事电除尘器工作的经验，提出了在设计、制造和调试中应充分考虑的诸如原始条件、设备参数选择、结构设计等影响电除尘器性能的各种因素，并从理论上进行分析和论证，以期通过讨论寻求最佳的设计方案和实践效果。     

膜生物反应器技术的研究和应用展望

膜生物反应器是将膜分离技术与生物上结合而开发的新型系统，该文就膜生物反应器的特征、研究现状、不同形式反应器的技术参数与处理效果等。进行了综述、由于膜生物反应器具有明显的优点，故愈来愈受到人们的重视、成为研究的热点之一。膜生物反应器的研究和范围不断拓宽，有的已进入污水处理实用阶段，建议今后在开发适合于分离的特种膜方面，在组件形式，操作条件，清洗方式等对膜通量的影响方面，以及生物作用与膜分离工艺的相互     

旋进型颗粒层除尘器的研究与试验

本文阐述了一种新型二级立式族进型颗粒层除尘器，它的关键技术采用独创的床外清灰及气流输送、滤料循环系统。该除尘器适用范围广、除尘效率高、成为新一代的除尘器专利产品。     

长芒刺电除尘器性能研究

提出一种新型长芒刺电除尘器,理论与实验研究结果表明,长芒刺电除尘器的场强、伏安特性和除尘效率等性能均高于普通线板式电除尘器。     

大武口发电厂3号炉电除尘器改造

根据大武口发电厂3号炉飞灰比电阻高的特点，对电除尘器进行了改造，使除尘效率由原来的97．3％提高到99.5％。     

滤膜法测定空气中氟化物的改进

测定环境空气中微量氟的方法一般采用滤膜法，但此法工作量大，针对这种情况，本文作两点改进：一是将采集的两张滤膜同时测定；二是将测定过程中的搅拌时间缩短，这样不影响测定结果的准确性，而且降低了工作量。     

布袋式除尘器在电厂输煤系统上的应用

针对胜利电厂皮带输煤系统粉尘浓度高、污染环境、影响职工身体健康的问题，用布袋式除尘器替代原有的静电除尘器，并对布袋除尘器辅助系统进行了多处改进和完善，提高了运行的可靠性。投运后粉尘质量浓度由原来的18．3mg／m^3降低至1．68mg／m^3，除尘效率达到了98％以上。     

垃圾焚烧烟气中二恶英的形态及去除方法

本文对垃圾焚烧发电厂烟气中二恶英的形态、浓度分布及国内已投产并验收的企业的烟气排放数据进行了调查分析，并指出有效去除烟气中二恶英的措施有采用高效袋式除尘器和在袋式除尘器前喷加活性炭粉两种。     

Shifts in microbial community structure and diversity in a MBR combined with worm reactors treating synthetic wastewater

The chemical oxygen demand (COD) and NH₃-N removal, membrane fouling, sludge characteristics and microbial community structure in a membrane bioreactor (MBR) coupled with worm reactors (SSBWR) were evaluated for 210 days. The obtained results were compared to those from a conventional MBR (C-MBR) operated in parallel. The results indicated that the combined MBR (S-MBR) achieved higher COD and NH₃-N removal efficiency, slower increase in membrane fouling, better sludge settleability and higher activities of the related enzymes in the activated sludge. Denaturing gradient gel electrophoresis was used to analyze the microbial community structures in the C-MBR and the S-MBR. The microbial community structure in the S-MBR was more diverse than that in the C-MBR. Additionally, the slow-growing microbes such as Saprospiraceae, Actinomyces, Frankia, Clostridium, Comamonas, Pseudomonas, Dechloromonas and Flavobacterium were enriched in the S-MBR, further accounting for the sludge reduction, membrane fouling alleviation and wastewater treatment.     

Effect of oxide nanoparticles on the morphology and fluidity of phospholipid membranes and the role of hydrogen bonds

Engineered oxide nanoparticles (NPs) are widely applied in insulators, catalyzers, paints, cosmetic products, textiles and semiconductors. Their attachment on cell membrane may lead to cytotoxicity. The effects of Al₂O₃, Fe₂O₃, SiO₂, TiO₂ and ZnO NPs on membrane integrity and fluidity were studied using giant or small unilamellar vesicles in this study. Al₂O₃ and SiO₂ NPs disrupted the oppositely charged membrane, indicating the important role of electrostatic attraction. However, Fe₂O₃, TiO₂ and ZnO NPs did not cause serious membrane disruption as Al₂O₃ and SiO₂ NPs. Membrane fluidity was evaluated by the generalized polarity (GP) values of Laurdan fluorescent emission. SiO₂ NPs induce the membrane gelation of both positively and negatively charged membrane. Al₂O₃ and ZnO NPs induced the gelation of the oppositely charged membrane, but did not cause obvious membrane gelation to the like charged membrane. The phospholipid molecular structural changes after NP exposure were analyzed by Fourier transform infrared (FT-IR) spectroscopy. FT-IR spectra revealed the hydrogen bond formation between NPs and the carbonyl/phosphate groups of phospholipids. Al₂O₃ and SiO₂ NPs showed strongest evidence of hydrogen bonding on their FT-IR spectra. It was consistent with the microscopic observation and fluorescent data that Al₂O₃ and SiO₂ NPs caused more serious membrane disruption and gelation. This study on membrane damage provides further knowledge on the cytotoxicity of nanomaterials and the safety of NP application.